From: Marco Trapanese <marcotrapanese@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] QtMultimedia and gstreamer-1.0
Date: Sun, 15 May 2016 10:28:45 +0200 [thread overview]
Message-ID: <5738333D.8010707@gmail.com> (raw)
In-Reply-To: <20160515100303.003752e2@gmx.net>
Il 15/05/2016 10:03, Peter Seiderer ha scritto:
> This means the header files etc. which are installed into the staging
> directory (and not into the target directory) which Qt needs to detect
> and compile with GStreamer support...
Thus, those files are needed only during the build process, they don't
need to be copied to the target, do they?
I found a config.log in my qt5multimedia-5.6.0 output/build/ directory.
It is attached to this email. It seems the gstreamer tests were
successfully. Furthermore in the plugins/mediaservice subdirectory I find:
libgstaudiodecoder.so
libgstcamerabin.so
libgstmediacapture.so
libgstmediaplayer.so
which are installed on target under /usr/lib/qt/plugins/mediaservice/
By the way, on target their size is slightly smaller. This is because
they are stripped or perhaps this may lead to an hidden problem? (just
to be sure I tried to copy them to the target but the behavior is the same).
I can rebuild all from scratch, but if it's correct it would be useless!
What else I should check?
Best regards
Marco
-------------- next part --------------
executing config test openal
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/openal && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/openal
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/openal && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/openal"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:37:19: fatal error: AL/al.h: File o directory non esistente
#include <AL/al.h>
^
compilation terminated.
Makefile:296: set di istruzioni per l'obiettivo ".obj/main.o" non riuscito
make[1]: *** [.obj/main.o] Errore 1
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/openal"
test openal FAILED
executing config test pulseaudio
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/pulseaudio && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/pulseaudio
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/pulseaudio && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/pulseaudio"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -D_REENTRANT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/glib-2.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/glib-2.0/include -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/pulseaudio.o pulseaudio.cpp
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o pulseaudio .obj/pulseaudio.o -lrt -lpthread -ldl -L/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -lpulse-mainloop-glib -lpulse -lglib-2.0 -lintl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/pulseaudio"
test pulseaudio succeeded
executing config test gstreamer
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -pthread -pthread -pthread -pthread -pthread -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/gstreamer-1.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/gstreamer-1.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/glib-2.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/glib-2.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:38:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:38:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o gstreamer .obj/main.o -lrt -lpthread -ldl -L/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -lgstaudio-1.0 -lgstvideo-1.0 -lgstbase-1.0 -lgstpbutils-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lintl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer"
test gstreamer succeeded
executing config test gstreamer_photography
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_photography && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_photography
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_photography && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_photography"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -pthread -pthread -pthread -pthread -pthread -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/gstreamer-1.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/gstreamer-1.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/glib-2.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/glib-2.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:41:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:41:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o gstreamer_photography .obj/main.o -lrt -lpthread -ldl -lgstphotography-1.0 -L/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -lgstaudio-1.0 -lgstvideo-1.0 -lgstbase-1.0 -lgstpbutils-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lintl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_photography"
test gstreamer_photography succeeded
executing config test gstreamer_encodingprofiles
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_encodingprofiles && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_encodingprofiles
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_encodingprofiles && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_encodingprofiles"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -pthread -pthread -pthread -pthread -pthread -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/gstreamer-1.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/gstreamer-1.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/glib-2.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/glib-2.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:39:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:39:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o gstreamer_encodingprofiles .obj/main.o -lrt -lpthread -ldl -L/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -lgstaudio-1.0 -lgstvideo-1.0 -lgstbase-1.0 -lgstpbutils-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lintl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_encodingprofiles"
test gstreamer_encodingprofiles succeeded
executing config test gstreamer_appsrc
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_appsrc && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_appsrc
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_appsrc && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_appsrc"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -pthread -pthread -pthread -pthread -pthread -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/gstreamer-1.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/gstreamer-1.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/glib-2.0 -I/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/glib-2.0/include -isystem /home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:38:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:38:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o gstreamer_appsrc .obj/main.o -lrt -lpthread -ldl -L/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -lgstaudio-1.0 -lgstvideo-1.0 -lgstbase-1.0 -lgstpbutils-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lintl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gstreamer_appsrc"
test gstreamer_appsrc succeeded
executing config test linux_v4l
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/linux_v4l && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/linux_v4l
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/linux_v4l && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/linux_v4l"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:36:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:36:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -Wl,-O1 -Wl,--enable-new-dtags -o linux_v4l .obj/main.o -lrt -lpthread -ldl
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/linux_v4l"
test linux_v4l succeeded
executing config test resourcepolicy
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/resourcepolicy && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/resourcepolicy
Project ERROR: libresourceqt5 development package not found
test resourcepolicy FAILED
executing config test gpu_vivante
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gpu_vivante && /home/femtotech/dev/buildroot/output/host/usr/bin/qmake -spec /home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ "CONFIG -= qt debug_and_release app_bundle lib_bundle" /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gpu_vivante
+ cd /home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gpu_vivante && make
make[1]: ingresso nella directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gpu_vivante"
/home/femtotech/dev/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/femtotech/dev/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot -O2 -O3 -std=gnu++0x -fno-exceptions -Wall -W -fPIC -DQT_NO_MTDEV -DQT_NO_LIBINPUT -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -I/home/femtotech/dev/buildroot/output/host/usr/mkspecs/devices/linux-buildroot-g++ -o .obj/main.o main.cpp
main.cpp:37:20: error: ?GL_VIV_YV12? was not declared in this scope
const int format = GL_VIV_YV12;
^
main.cpp:39:14: warning: unused parameter ?argc? [-Wunused-parameter]
int main(int argc, char** argv)
^
main.cpp:39:27: warning: unused parameter ?argv? [-Wunused-parameter]
int main(int argc, char** argv)
^
Makefile:296: set di istruzioni per l'obiettivo ".obj/main.o" non riuscito
make[1]: *** [.obj/main.o] Errore 1
make[1]: uscita dalla directory "/home/femtotech/dev/buildroot/output/build/qt5multimedia-5.6.0/config.tests/gpu_vivante"
test gpu_vivante FAILED
next prev parent reply other threads:[~2016-05-15 8:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-15 6:04 [Buildroot] QtMultimedia and gstreamer-1.0 Marco Trapanese
2016-05-15 8:03 ` Peter Seiderer
2016-05-15 8:28 ` Marco Trapanese [this message]
2016-05-15 12:05 ` Peter Seiderer
2016-05-15 12:10 ` Marco Trapanese
2016-05-16 20:18 ` Peter Seiderer
2016-05-16 20:22 ` Marco Trapanese
2016-05-16 21:08 ` Marco Trapanese
2016-05-17 10:58 ` Peter Seiderer
2016-05-17 11:07 ` Marco Trapanese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5738333D.8010707@gmail.com \
--to=marcotrapanese@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.