diff for duplicates of <573DCE43.70906@nvidia.com> diff --git a/a/1.txt b/N1/1.txt index c2d28a4..45d614a 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -3,7 +3,7 @@ On 29/02/16 21:01, Lucas Stach wrote: > This allows to switch the card signal voltage level to 1.8V, > which is needed for any ultra high speed modes to work. > -> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org> +> Signed-off-by: Lucas Stach <dev@lynxeye.de> > --- > This needs the SDMMC memcomp pad calibration patches I just > sent out to be applied, otherwise the card voltage change will @@ -33,7 +33,7 @@ if this name should be just "vddio_sdmmc"? > }; > @@ -1919,6 +1919,7 @@ > -> sdhci@78000000 { +> sdhci at 78000000 { > status = "okay"; > + vqmmc-supply = <&ldo5_reg>; > cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -43,7 +43,7 @@ if this name should be just "vddio_sdmmc"? Otherwise ... -Acked-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> +Acked-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon diff --git a/a/content_digest b/N1/content_digest index 63c1b4e..bc376ab 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,8 @@ "ref\01456779678-20173-1-git-send-email-dev@lynxeye.de\0" - "ref\01456779678-20173-1-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org\0" - "From\0Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0" - "Subject\0Re: [PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" + "From\0jonathanh@nvidia.com (Jon Hunter)\0" + "Subject\0[PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" "Date\0Thu, 19 May 2016 15:31:31 +0100\0" - "To\0Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>" - Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> - Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - " Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Cc\0linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" - " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "\n" @@ -16,7 +10,7 @@ "> This allows to switch the card signal voltage level to 1.8V,\n" "> which is needed for any ultra high speed modes to work.\n" "> \n" - "> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>\n" + "> Signed-off-by: Lucas Stach <dev@lynxeye.de>\n" "> ---\n" "> This needs the SDMMC memcomp pad calibration patches I just\n" "> sent out to be applied, otherwise the card voltage change will\n" @@ -46,7 +40,7 @@ "> \t\t\t\t};\n" "> @@ -1919,6 +1919,7 @@\n" "> \n" - "> \tsdhci@78000000 {\n" + "> \tsdhci at 78000000 {\n" "> \t\tstatus = \"okay\";\n" "> +\t\tvqmmc-supply = <&ldo5_reg>;\n" "> \t\tcd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;\n" @@ -56,7 +50,7 @@ "\n" "Otherwise ...\n" "\n" - "Acked-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n" + "Acked-by: Jon Hunter <jonathanh@nvidia.com>\n" "\n" "Cheers\n" "Jon\n" @@ -64,4 +58,4 @@ "-- \n" nvpublic -7ebcb472a23efbad725844025e1000b328fe3d9fb740d24db63e4916210c689f +9273feb3fdbe3c8b898bf64e5c03f4b1a579c1a2096c7fe2ec2953e17158b69f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.