diff for duplicates of <573DE5F3.2060406@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index 63d6b02..8a744a8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -4,7 +4,7 @@ On 05/19/2016 08:31 AM, Jon Hunter wrote: >> This allows to switch the card signal voltage level to 1.8V, >> which is needed for any ultra high speed modes to work. >> ->> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org> +>> Signed-off-by: Lucas Stach <dev@lynxeye.de> >> --- >> This needs the SDMMC memcomp pad calibration patches I just >> sent out to be applied, otherwise the card voltage change will diff --git a/a/content_digest b/N1/content_digest index 8786e75..35fbd2f 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,16 +1,9 @@ "ref\01456779678-20173-1-git-send-email-dev@lynxeye.de\0" "ref\0573DCE43.70906@nvidia.com\0" - "ref\0573DCE43.70906-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org\0" - "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" - "Subject\0Re: [PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" + "From\0swarren@wwwdotorg.org (Stephen Warren)\0" + "Subject\0[PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" "Date\0Thu, 19 May 2016 10:12:35 -0600\0" - "To\0Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0" - "Cc\0Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>" - Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - " Bryan Wu <pengw-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 05/19/2016 08:31 AM, Jon Hunter wrote:\n" @@ -19,7 +12,7 @@ ">> This allows to switch the card signal voltage level to 1.8V,\n" ">> which is needed for any ultra high speed modes to work.\n" ">>\n" - ">> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>\n" + ">> Signed-off-by: Lucas Stach <dev@lynxeye.de>\n" ">> ---\n" ">> This needs the SDMMC memcomp pad calibration patches I just\n" ">> sent out to be applied, otherwise the card voltage change will\n" @@ -48,4 +41,4 @@ "\n" CC += Bryan in case he has any recollection since he wrote this DT. -440dd568a43f3056e4d342dc7440a0109f74a9b30303e165e9e49bab2867f2eb +a9472c7443a1e8675b691e919123af38aa591d2e6b43865bb60c6284264b600e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.