All of lore.kernel.org
 help / color / mirror / Atom feed
From: "piotr.lewicki" <piotr.lewicki@elfin.de>
To: Herve Jourdain <herve.jourdain@neuf.fr>, yocto@yoctoproject.org
Subject: Re: [meta-raspberrypi][PATCH v2 00/13] Support for VC4 graphics driver
Date: Tue, 24 May 2016 11:59:26 +0200	[thread overview]
Message-ID: <574425FE.1030909@elfin.de> (raw)
In-Reply-To: <1463745113-55142-1-git-send-email-herve.jourdain@neuf.fr>

[-- Attachment #1: Type: text/plain, Size: 5293 bytes --]

I have tried these patches, but there were some hunks and errors during 
applying to current master revision 
(69840c0bbe03c2e61601e2377c8e2adc264e0478).
Building 'rpi-hwup-image' passed, but while building 'rpi-test-image' 
(omxplayer recipe) I have noticed some errors due to missing files:
- IL/OMX_Core.h
- VG/openvg.h
- bcm_host.h

I'm attaching omxplayer_build_errors.txt with build log and my patch 
with changes created by Herve (adapted to current master revision) - 
Support_for_VC4_graphics_driver.patch (Herve- if you decide to use that 
and resend v3 of patches - please remove my TODO from 
"conf/machine/include/rpi-base.inc"

Could you take a look at that and help me resolve those issues?


I currently have a problem that I'm forced to use Raspbian because 
playing FHD/1080p videos with omxplayer from Yocto runs choppy (I'm not 
sure if that's the right word, but playback is not smooth) while with 
Raspbian it works perfect.
Do you think that enabling VC4 graphics driver can solve my issue?
Did any of you experienced similar problems? Do you have some other 
solution or do you know what's the cause of this?


Thanks,
Piotr Lewicki


On 20.05.2016 13:51, Herve Jourdain wrote:
> This v2 series addresses the following issues with the first series:
> a. Fix the 4.4.10 kernel revision
> b. Effectively add vc4-kms-v3d overlay to the list of overlays to build (forgotten previously)
> c. Make the parameter to the v4c-kms-v3d overlay configurable
> d. Add default values for the cma parameter to the v4c-kms-v3d overlay, depending on the board (and the memory it has)
>
> This patch series enables the support for the VC4 graphics driver from Eric Anholt.
> There was a previous patch series by Javier Martinez Canillas, but it required use of a different kernel.
> VC4 is now supported in the raspberrypi official kernel, at least for 4.4.9+.
> The support in 4.1 exists, but it is NOT STABLE, so it has been deemed unreasonable to support VC4 with 4.1 kernels.
>
> THEREFORE, VC4 graphics is supported ONLY for kernel versions 4.4.9 and later.
>
> This patch series proposes to support VC4 by only adding 'vc4graphics' to MACHINE_FEATURES, for raspberrypi. If this is set, it will trigger all the necessary configuration/changes to use the VC4 driver, including mesa/wayland/weston currently, and adding the overlay required.
> In order for this series to work, some previous patches are needed (support for .dtbo, and fix of the mesa packaging when there is no DRI driver).
> The memory reserved for the VC4 driver has default values depending on the version of the board used, but it can be configured by setting VC4_CMA_SIZE to a value supported by the overlay ('cma-256', 'cma-192', 'cma-128', 'cma-96', 'cma-64').
> 'cma-256' is the recommended value, but it might not be possible on boards with 512MB or DRAM, or less...
> 'cma-64' is known to not being able to support FHD/1080p.
>
> It was tested with wayland/weston, without the support for X11.
>
> This patch series depends on two other patch series previously posted, that enable the support for .dtbo overlay files.
>
> Herve Jourdain (13):
>    rpi-default-providers.inc: change default providers to support
>      vc4graphics
>    rpi-base.inc: add vc4-kms-v3d to the overlays to support vc4graphics
>    raspberrypi.conf: set the default value of VC4_CMA_SIZE to support
>      vc4graphics
>    raspberrypi0.conf: set the default value of VC4_CMA_SIZE to support
>      vc4graphics
>    raspberrypi2.conf: set the default value of VC4_CMA_SIZE to support
>      vc4graphics
>    raspberrypi3.conf: set the default value of VC4_CMA_SIZE to support
>      vc4graphics
>    firmware.inc: bump version to support vc4graphics
>    rpi-config_git.bb: add v4c overlay to config.txt to support
>      vc4graphics
>    wayland/weston_%.bbappend: modify configuration options to support
>      vc4graphics
>    weston/weston_%.bbappend: modify configuration options to support
>      vc4graphics
>    mesa_%.bbappend: new file to add the correct configuration options to
>      support vc4graphics
>    linux-raspberrypi_4.4.bb: bump the kernel revision to 4.4.10 to
>      support vc4graphics
>    linux-rpi.inc: add the configuration options required to support
>      vc4graphics
>
>   conf/machine/include/rpi-base.inc              |  1 +
>   conf/machine/include/rpi-default-providers.inc |  8 ++++----
>   conf/machine/raspberrypi.conf                  |  2 ++
>   conf/machine/raspberrypi0.conf                 |  2 ++
>   conf/machine/raspberrypi2.conf                 |  2 ++
>   conf/machine/raspberrypi3.conf                 |  2 ++
>   recipes-bsp/bootfiles/rpi-config_git.bb        | 10 +++++++++-
>   recipes-bsp/common/firmware.inc                |  4 ++--
>   recipes-graphics/mesa/mesa_%.bbappend          |  4 ++++
>   recipes-graphics/wayland/weston_%.bbappend     |  6 ++----
>   recipes-graphics/weston/weston_%.bbappend      | 13 +++++++------
>   recipes-kernel/linux/linux-raspberrypi_4.4.bb  |  4 ++--
>   recipes-kernel/linux/linux-rpi.inc             | 10 ++++++++++
>   13 files changed, 49 insertions(+), 19 deletions(-)
>   create mode 100644 recipes-graphics/mesa/mesa_%.bbappend
>


[-- Attachment #2: omxplayer_build_errors.txt --]
[-- Type: text/plain, Size: 3460 bytes --]

| In file included from linux/RBP.h:45:0,
|                  from linux/RBP.cpp:22:
| ./DllBCM.h:34:22: fatal error: bcm_host.h: No such file or directory
| compilation terminated.
| make: *** [linux/RBP.o] Error 1
| make: *** Waiting for unfinished jobs....
| In file included from SubtitleRenderer.cpp:27:0:
| SubtitleRenderer.h:30:23: fatal error: VG/openvg.h: No such file or directory
| compilation terminated.
| make: *** [SubtitleRenderer.o] Error 1
| In file included from OMXCore.h:32:0,
|                  from OMXVideo.h:25,
|                  from OMXVideo.cpp:28:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| make: *** [OMXVideo.o] Error 1
| In file included from OMXCore.h:32:0,
|                  from OMXCore.cpp:31:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| make: *** [OMXCore.o] Error 1
| In file included from OMXCore.h:32:0,
|                  from OMXAudio.h:34,
|                  from OMXAudio.cpp:27:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| make: *** [OMXAudio.o] Error 1
| In file included from OMXCore.h:32:0,
|                  from OMXClock.h:27,
|                  from OMXReader.cpp:29:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| In file included from OMXCore.h:32:0,
|                  from OMXClock.h:27,
|                  from OMXPlayerAudio.h:32,
|                  from OMXPlayerAudio.cpp:28:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| In file included from OMXCore.h:32:0,
|                  from OMXClock.h:27,
|                  from OMXClock.cpp:32:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| In file included from OMXCore.h:32:0,
|                  from OMXClock.h:27,
|                  from OMXPlayerSubtitles.h:23,
|                  from OMXPlayerSubtitles.cpp:19:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| In file included from OMXCore.h:32:0,
|                  from OMXClock.h:27,
|                  from OMXPlayerVideo.h:30,
|                  from OMXPlayerVideo.cpp:28:
| DllOMX.h:36:25: fatal error: IL/OMX_Core.h: No such file or directory
| compilation terminated.
| make: *** [OMXReader.o] Error 1
| make: *** [OMXPlayerAudio.o] Error 1
| make: *** [OMXClock.o] Error 1
| make: *** [OMXPlayerSubtitles.o] Error 1
| make: *** [OMXPlayerVideo.o] Error 1
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/piotr.lewicki/yocto-raspberry/pi3-16.05.19/build/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/omxplayer/git-r4/temp/log.do_compile.6167)
ERROR: Task 928 (/home/piotr.lewicki/yocto-raspberry/pi3-16.05.19/layers/meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer_git.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3680 tasks of which 3639 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
  /home/piotr.lewicki/yocto-raspberry/pi3-16.05.19/layers/meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer_git.bb, do_compile
  Summary: There were 2 ERROR messages shown, returning a non-zero exit code.


[-- Attachment #3: Support_for_VC4_graphics_driver.patch --]
[-- Type: text/x-patch, Size: 8574 bytes --]

diff --git a/conf/machine/include/rpi-base.inc b/conf/machine/include/rpi-base.inc
index 56ca83e..21bf9c0 100644
--- a/conf/machine/include/rpi-base.inc
+++ b/conf/machine/include/rpi-base.inc
@@ -37,7 +37,9 @@ KERNEL_DEVICETREE ?= " \
     overlays/w1-gpio-overlay.dtb \
     overlays/w1-gpio-pullup-overlay.dtb \
     overlays/pi3-miniuart-bt-overlay.dtb \
+    overlays/vc4-kms-v3d-overlay.dtb \
     "
+# TODO line with overlays/vc4-kms-v3d.dtbo : decide whether it is .dtb or .dtbo
 KERNEL_IMAGETYPE ?= "Image"
 
 MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
diff --git a/conf/machine/include/rpi-default-providers.inc b/conf/machine/include/rpi-default-providers.inc
index cabbd43..0bc8838 100644
--- a/conf/machine/include/rpi-default-providers.inc
+++ b/conf/machine/include/rpi-default-providers.inc
@@ -3,8 +3,8 @@
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-raspberrypi"
 PREFERRED_PROVIDER_u-boot ?= "u-boot-rpi"
 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
-PREFERRED_PROVIDER_virtual/egl ?= "userland"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "userland"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/egl ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "userland", d)}"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "userland", d)}"
+PREFERRED_PROVIDER_virtual/libgl ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
+PREFERRED_PROVIDER_virtual/mesa ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
 PREFERRED_PROVIDER_jpeg ?= "jpeg"
diff --git a/conf/machine/raspberrypi.conf b/conf/machine/raspberrypi.conf
index 0f95f1a..b369c67 100644
--- a/conf/machine/raspberrypi.conf
+++ b/conf/machine/raspberrypi.conf
@@ -8,3 +8,5 @@ require conf/machine/include/tune-arm1176jzf-s.inc
 include conf/machine/include/rpi-base.inc
 
 SERIAL_CONSOLE = "115200 ttyAMA0"
+VC4_CMA_SIZE_raspberrypi ?= "cma-64"
+
diff --git a/conf/machine/raspberrypi0.conf b/conf/machine/raspberrypi0.conf
index ccf9ae7..0df9121 100644
--- a/conf/machine/raspberrypi0.conf
+++ b/conf/machine/raspberrypi0.conf
@@ -6,3 +6,5 @@ MACHINEOVERRIDES = "raspberrypi:${MACHINE}"
 include conf/machine/raspberrypi.conf
 
 SERIAL_CONSOLE = "115200 ttyAMA0"
+VC4_CMA_SIZE ?= "cma-128"
+
diff --git a/conf/machine/raspberrypi2.conf b/conf/machine/raspberrypi2.conf
index b6346e6..3a82d66 100644
--- a/conf/machine/raspberrypi2.conf
+++ b/conf/machine/raspberrypi2.conf
@@ -8,3 +8,5 @@ require conf/machine/include/tune-cortexa7.inc
 include conf/machine/include/rpi-base.inc
 
 SERIAL_CONSOLE = "115200 ttyAMA0"
+VC4_CMA_SIZE ?= "cma-256"
+
diff --git a/conf/machine/raspberrypi3.conf b/conf/machine/raspberrypi3.conf
index cb6056e..438c6e6 100644
--- a/conf/machine/raspberrypi3.conf
+++ b/conf/machine/raspberrypi3.conf
@@ -9,3 +9,5 @@ MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-brcm43430"
 include conf/machine/raspberrypi2.conf
 
 SERIAL_CONSOLE = "115200 ttyS0"
+VC4_CMA_SIZE ?= "cma-256"
+
diff --git a/recipes-bsp/bootfiles/rpi-config_git.bb b/recipes-bsp/bootfiles/rpi-config_git.bb
index 4bc8eb7..f610718 100644
--- a/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -13,12 +13,14 @@ SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
 
 S = "${WORKDIR}/git"
 
-PR = "r4"
+PR = "r5"
 
 PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
 PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
 PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
 
+VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
+
 inherit deploy
 
 do_deploy() {
@@ -102,6 +104,12 @@ do_deploy() {
         echo "# Enable UART" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "enable_uart=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+
+    # VC4 Graphics support
+    if [ "${VC4GRAPHICS}" = "1" ]; then
+        echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=vc4-kms-v3d,${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
 }
 
 addtask deploy before do_package after do_install
diff --git a/recipes-bsp/common/firmware.inc b/recipes-bsp/common/firmware.inc
index bf11e4c..b467fc6 100644
--- a/recipes-bsp/common/firmware.inc
+++ b/recipes-bsp/common/firmware.inc
@@ -1,5 +1,5 @@
-RPIFW_SRCREV ?= "3816e1ce1e6ebc6d2bf0596dbd52849e16aa7e94"
-RPIFW_DATE ?= "20160512"
+RPIFW_SRCREV ?= "c17fa41b8e8321d891230f97837fee98feebc1ac"
+RPIFW_DATE ?= "20160513"
 RPIFW_SRC_URI ?= "git://github.com/raspberrypi/firmware.git;protocol=git;branch=master"
 RPIFW_S ?= "${WORKDIR}/git"
 
diff --git a/recipes-graphics/mesa/mesa_%.bbappend b/recipes-graphics/mesa/mesa_%.bbappend
new file mode 100644
index 0000000..b182388
--- /dev/null
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@@ -0,0 +1,4 @@
+PACKAGECONFIG_append_rpi = " gallium"
+GALLIUMDRIVERS_rpi = "vc4"
+DRIDRIVERS_rpi = ""
+
diff --git a/recipes-graphics/wayland/weston_%.bbappend b/recipes-graphics/wayland/weston_%.bbappend
index c3a7421..57b8079 100644
--- a/recipes-graphics/wayland/weston_%.bbappend
+++ b/recipes-graphics/wayland/weston_%.bbappend
@@ -1,4 +1,2 @@
-EXTRA_OECONF_append_rpi = "\
-        --enable-rpi-compositor \
-        WESTON_NATIVE_BACKEND=rpi-backend.so \
-       "
+EXTRA_OECONF_append_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', ' --enable-rpi-compositor WESTON_NATIVE_BACKEND=rpi-backend.so', d)}"
+
diff --git a/recipes-graphics/weston/weston_%.bbappend b/recipes-graphics/weston/weston_%.bbappend
index 3ec311d..70f4360 100644
--- a/recipes-graphics/weston/weston_%.bbappend
+++ b/recipes-graphics/weston/weston_%.bbappend
@@ -1,7 +1,8 @@
-EXTRA_OECONF += "--enable-rpi-compositor \
-             --disable-resize-optimization \
-             --disable-setuid-install \
-             --disable-xwayland-test \
-             --disable-simple-egl-clients \
-             WESTON_NATIVE_BACKEND=rpi-backend.so \
+PACKAGECONFIG_rpi_remove = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', ' fbdev', '', d)}"
+EXTRA_OECONF += "--disable-xwayland-test \
+                 --disable-simple-egl-clients \
 "
+EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--enable-rpi-compositor', d)}"
+EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--disable-resize-optimization', d)}"
+EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--disable-setuid-install', d)}"
+EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'WESTON_NATIVE_BACKEND=rpi-backend.so', d)}"
diff --git a/recipes-kernel/linux/linux-raspberrypi_4.4.bb b/recipes-kernel/linux/linux-raspberrypi_4.4.bb
index ba47b22..b8d6028 100644
--- a/recipes-kernel/linux/linux-raspberrypi_4.4.bb
+++ b/recipes-kernel/linux/linux-raspberrypi_4.4.bb
@@ -1,8 +1,8 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
 
-LINUX_VERSION ?= "4.4.9"
+LINUX_VERSION ?= "4.4.10"
 
-SRCREV = "3b440738b5c1adc3ec3ee72ceca799d1b8d264df"
+SRCREV = "c317a023583b17a4350f066924d5fff47a81f91e"
 SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.4.y \
 "
 require linux-raspberrypi.inc
diff --git a/recipes-kernel/linux/linux-rpi.inc b/recipes-kernel/linux/linux-rpi.inc
index 1755685..c120dbd 100644
--- a/recipes-kernel/linux/linux-rpi.inc
+++ b/recipes-kernel/linux/linux-rpi.inc
@@ -111,6 +111,16 @@ do_configure_prepend() {
     # Activate CONFIG_LEGACY_PTYS
     kernel_configure_variable LEGACY_PTYS y
 
+    # Activate the configuration options for VC4
+    VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
+    if [ ${VC4GRAPHICS} = "1" ]; then
+        kernel_configure_variable I2C_BCM2835 y
+        kernel_configure_variable DRM y
+        kernel_configure_variable DRM_FBDEV_EMULATION n
+        kernel_configure_variable DRM_VC4 y
+        kernel_configure_variable FB_BCM2708 n
+    fi
+
     # Keep this the last line
     # Remove all modified configs and add the rest to .config
     sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${B}/.config'

  parent reply	other threads:[~2016-05-24  9:59 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-20 11:51 [meta-raspberrypi][PATCH v2 00/13] Support for VC4 graphics driver Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 01/13] rpi-default-providers.inc: change default providers to support vc4graphics Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 02/13] rpi-base.inc: add vc4-kms-v3d to the overlays " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 03/13] raspberrypi.conf: set the default value of VC4_CMA_SIZE " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 04/13] raspberrypi0.conf: " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 05/13] raspberrypi2.conf: " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 06/13] raspberrypi3.conf: " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 07/13] firmware.inc: bump version " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 08/13] rpi-config_git.bb: add v4c overlay to config.txt " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 09/13] wayland/weston_%.bbappend: modify configuration options " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 10/13] weston/weston_%.bbappend: " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 11/13] mesa_%.bbappend: new file to add the correct " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 12/13] linux-raspberrypi_4.4.bb: bump the kernel revision to 4.4.10 " Herve Jourdain
2016-05-20 11:51 ` [meta-raspberrypi][PATCH v2 13/13] linux-rpi.inc: add the configuration options required " Herve Jourdain
2016-05-20 15:54 ` [meta-raspberrypi][PATCH v2 00/13] Support for VC4 graphics driver Khem Raj
2016-05-24  9:59 ` piotr.lewicki [this message]
2016-05-24 10:42   ` Herve Jourdain
2016-05-24 11:08     ` piotr.lewicki
2016-05-24 12:06       ` Herve Jourdain
2016-05-24 12:27         ` piotr.lewicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=574425FE.1030909@elfin.de \
    --to=piotr.lewicki@elfin.de \
    --cc=herve.jourdain@neuf.fr \
    --cc=yocto@yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.