From: Julien Grall <julien.grall@arm.com>
To: Shanker Donthineni <shankerd@codeaurora.org>,
xen-devel <xen-devel@lists.xensource.com>,
Stefano Stabellini <sstabellini@kernel.org>
Cc: Andre Przywara <andre.przywara@arm.com>,
Philip Elcan <pelcan@codeaurora.org>,
Vikram Sethi <vikrams@codeaurora.org>,
Wei Chen <wei.chen@linaro.org>
Subject: Re: [PATCH V8 2/3] drivers/pl011: Use combination of UARTRIS and UARTMSC instead of UARTMIS
Date: Thu, 9 Jun 2016 11:15:59 +0100 [thread overview]
Message-ID: <575941DF.4010001@arm.com> (raw)
In-Reply-To: <1465392516-20542-2-git-send-email-shankerd@codeaurora.org>
Hello Shanker,
On 08/06/16 14:28, Shanker Donthineni wrote:
> The Masked interrupt status register (UARTMIS) is not described in ARM
> SBSA 2.x document. Anding of two registers UARTMSC and UARTRIS values
> gives the same information as register UARTMIS.
>
> UARTRIS, UARTMSC and UARTMIS definitions are found in PrimeCell UART
> PL011 (Revision: r1p4).
> - 3.3.10 Interrupt mask set/clear register, UARTIMSC
> - 3.3.11 Raw interrupt status register, UARTRIS
> - 3.3.12 Masked interrupt status register, UARTMIS
>
> This change is necessary for driver to be SBSA compliant v2.x without
> affecting the current driver functionality.
>
> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
> ---
> Changes since v7:
> Moved comment 'To compatible with SBSA v2.x document, all accesses should be 32-bit' to #3
>
> Changes since v1:
> Added a new function to return an interrupt status.
>
> xen/drivers/char/pl011.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
> index 6a3c21b..a2f929b 100644
> --- a/xen/drivers/char/pl011.c
> +++ b/xen/drivers/char/pl011.c
> @@ -53,11 +53,17 @@ static struct pl011 {
> #define pl011_read(uart, off) readl((uart)->regs + (off))
> #define pl011_write(uart, off,val) writel((val), (uart)->regs + (off))
>
> +static unsigned int pl011_intr_status(struct pl011 *uart)
> +{
> + /* UARTMIS is not documented in SBSA v2.x, so using UARTRIS/UARTIMSC */
s/so using/so use/
Also missing full stop at the end of the comment.
> + return ( pl011_read(uart, RIS) & pl011_read(uart, IMSC) );
No space after the first parenthesis and before the last one.
With these changes:
Reviewed-by: Julien Grall <julien.grall@arm.com>
Regards,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-06-09 10:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 13:28 [PATCH V8 1/3] drivers/pl011: Don't configure baudrate Shanker Donthineni
2016-06-08 13:28 ` [PATCH V8 2/3] drivers/pl011: Use combination of UARTRIS and UARTMSC instead of UARTMIS Shanker Donthineni
2016-06-09 10:15 ` Julien Grall [this message]
2016-06-09 15:27 ` Shanker Donthineni
2016-06-08 13:28 ` [PATCH V8 3/3] arm/acpi: Add Server Base System Architecture UART support Shanker Donthineni
2016-06-09 10:19 ` Julien Grall
2016-06-09 15:26 ` Shanker Donthineni
2016-06-09 15:35 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575941DF.4010001@arm.com \
--to=julien.grall@arm.com \
--cc=andre.przywara@arm.com \
--cc=pelcan@codeaurora.org \
--cc=shankerd@codeaurora.org \
--cc=sstabellini@kernel.org \
--cc=vikrams@codeaurora.org \
--cc=wei.chen@linaro.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.