[U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds

[Marek Vasut <marex@denx.de>]

On 06/10/2016 05:41 AM, Rajesh Bhagat wrote:
> 
> 
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Thursday, June 09, 2016 7:12 PM
>> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; u-boot at lists.denx.de
>> Cc: Sriram Dash <sriram.dash@nxp.com>; albert.u.boot at aribaud.net;
>> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Rajat Srivastava
>> <rajat.srivastava@nxp.com>
>> Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
>>
>> On 06/09/2016 08:57 AM, Rajesh Bhagat wrote:
>>> Adds USB EHCI support for ls1012qds by adding the support for NXP ULPI
>>> PHY and adding the support it configuration files. Also enables, USB2
>>> IP in ns access defines.
>>>
>>> Rajesh Bhagat (3):
>>>   drivers: usb: fsl: add USB ULPI init code
>>>   config: ls1012aqds: Add USB EHCI support for ls1012aqds
>>>   armv8: ls1012a: Added CSU assignment for USB2
>>>
>>>  .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |    1 +
>>>  .../include/asm/arch-fsl-layerscape/ns_access.h    |    2 +
>>>  drivers/usb/host/ehci-fsl.c                        |   21 ++++++++++++++++++++
>>>  include/configs/ls1012aqds.h                       |    5 ++++
>>>  include/usb/ehci-ci.h                              |    2 +-
>>>  5 files changed, 30 insertions(+), 1 deletions(-)
>>>
> 
> Hello Marek, 
> 
>> I wanted to apply these on u-boot-usb/master , but patch 2 fails to apply. Please
>> rebase and repose.
>>
> 
> Can you apply below patch for Layerscape USB macro cleanup for various Soc to 
> apply above patch:
> 
> https://patchwork.ozlabs.org/patch/631595/

This has to go through soc tree, so I will have to wait for it to be
applied. Let me know when it's in, then I can pick these patches.

> [root at phoenix u-boot-usb]$ pw-am.sh 631595
> 2016-06-10 09:02:02 URL:https://patchwork.ozlabs.org/patch/631595/mbox/ [6138] -> "pw-am-631595.patch" [1]
> Applying: include: usb: Rename USB controller base address mapping
> [root at phoenix u-boot-usb]$ pw-am.sh 632644
> 2016-06-10 09:02:18 URL:https://patchwork.ozlabs.org/patch/632644/mbox/ [2104] -> "pw-am-632644.patch" [1]
> Applying: drivers: usb: fsl: add USB ULPI init code
> [root at phoenix u-boot-usb]$ pw-am.sh 632646
> 2016-06-10 09:02:28 URL:https://patchwork.ozlabs.org/patch/632646/mbox/ [2819] -> "pw-am-632646.patch" [1]
> Applying: config: ls1012aqds: Add USB EHCI support for ls1012aqds
> [root at phoenix u-boot-usb]$ pw-am.sh 632645
> 2016-06-10 09:02:36 URL:https://patchwork.ozlabs.org/patch/632645/mbox/ [1501] -> "pw-am-632645.patch" [1]
> Applying: armv8: ls1012a: Added CSU assignment for USB2
> 
> OR 
> 
> Please share if there is a need to rebase them. 
> 
> Best Regards,
> Rajesh Bhagat
> 
>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut