Re: Using irq-crossbar.c

[Mason <slash.tmp@free.fr>]

On 10/06/2016 18:05, Marc Zyngier wrote:

> On 10/06/16 16:37, Sebastian Frias wrote:
>
>> here's the diff on our DT:
>>
>> --- tango4-common.dtsi	2016-06-10 16:23:08.244246017 +0200
>> +++ tangox_irqv2-common.dtsi	2016-06-10 16:24:01.212588737 +0200
>> @@ -47,7 +47,7 @@
>>  
>>  	soc {
>>  		compatible = "simple-bus";
>> -		interrupt-parent = <&irq0>;
>> +		interrupt-parent = <&irq_mux>;
>>  		#address-cells = <1>;
>>  		#size-cells = <1>;
>>  		ranges;
>> @@ -75,7 +75,7 @@
>>  		uart: serial@10700 {
>>  			compatible = "ralink,rt2880-uart";
>>  			reg = <0x10700 0x30>;
>> -			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>>  			clock-frequency = <7372800>;
>>  			reg-shift = <2>;
>>  		};
>> @@ -83,10 +83,11 @@
>>  		eth0: ethernet@26000 {
>>  			compatible = "sigma,smp8734-ethernet";
>>  			reg = <0x26000 0x800>;
>> -			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
>>  			clocks = <&clkgen 1>;
>>  		};
>>  
>> +#if 0
>>  		intc: interrupt-controller@6e000 {
>>  			compatible = "sigma,smp8642-intc";
>>  			reg = <0x6e000 0x400>;
>> @@ -117,5 +118,16 @@
>>  				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>  			};
>>  		};
>> +#else
>> +		irq_mux: irq_mux@6f800 {
>> +			 compatible = "sigma,smp-irq-mux";
>> +			 reg = <0x6f800 0x400>;
>> +			 interrupt-controller;
>> +			 interrupt-parent = <&gic>;
>> +			 irqs-reserved = <2 3 4 125 126 127>;
>> +		};
> 
> Where is the GIC? Where is the #interrupt-cells property? What is the
> interrupt parent for the GIC itself? (and I'm tempted to add "What is
> your name? What is you quest?", but that's because it is Friday and I
> feel like I need a beer...).

Beer and cheese? Beurk! ;-)

I think Sebastian is even more baffled by the DT mess
(sorry, intricacies) than I am.

The base file he was referring to is:

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/tango4-common.dtsi

Regards.