From: Sylwester Nawrocki <s.nawrocki@samsung.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Mike Turquette <mturquette@baylibre.com>
Cc: "linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
linux-samsung-soc <linux-samsung-soc@vger.kernel.org>
Subject: [GIT PULL] Samsung clk updates for 4.8
Date: Mon, 13 Jun 2016 15:10:10 +0200 [thread overview]
Message-ID: <575EB0B2.8040001@samsung.com> (raw)
The following changes since commit 1a695a905c18548062509178b98bc91e67510864:
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
git://linuxtv.org/snawrocki/samsung.git tags/clk-samsung-4.8
for you to fetch changes up to 0e4504470667d355b53ca3c9802fdd2120c9f946:
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device (2016-06-10 12:15:30 +0200)
----------------------------------------------------------------
- a fix for exynos7 to prevent gating some critical CMU clocks,
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
----------------------------------------------------------------
Alim Akhtar (1):
clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
Bartlomiej Zolnierkiewicz (3):
clk: samsung: exynos5433: prepare for adding CPU clocks
clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
Beomho Seo (1):
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag for AUD UART
Jaehoon Chung (1):
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device
Javier Martinez Canillas (1):
clk: samsung: exynos5420: Set ID for aclk333 gate clock
Jonghwa Lee (1):
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flags to avoid hang during S2R
Krzysztof Kozlowski (31):
dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
dt-bindings: clock: Add TMU clock ID to Exynos5410
dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410
clk: samsung: Remove useless check for return value of samsung_clk_init
clk: samsung: clkout: Add support for Exynos5410
clk: samsung: Constify clock init data with clock arrays
clk: samsung: exynos3250: Move platform driver and of_device_id to init section
clk: samsung: exynos3250: Constify all clock initializers
clk: samsung: exynos4: Move local function to init section
clk: samsung: exynos4: Constify all clock initializers
clk: samsung: exynos4415: Constify all clock initializers
clk: samsung: exynos4415: Move PLL rates data to init section
clk: samsung: exynos5250: Constify all clock initializers
clk: samsung: exynos5260: Constify all clock initializers
clk: samsung: exynos5410: Constify all clock initializers
clk: samsung: exynos5420: Constify all clock initializers
clk: samsung: exynos5440: Constify all clock initializers
clk: samsung: exynos7: Constify all clock initializers
clk: samsung: exynos5433: Constify all clock initializers
clk: samsung: exynos5433: Move PLL rates data to init section
clk: samsung: exynos5420: Move sleep init function and PLL data to init section
clk: samsung: exynos5250: Move sleep init function to init section
clk: samsung: Fully constify mux parent names
clk: samsung: exynos3250: Move PLL rates data to init section
clk: samsung: exynos5410: Add serial3, USB and PWM clocks
clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
clk: samsung: exynos5410: Add TMU clock
clk: samsung: Suppress unbinding to prevent theoretical attacks
clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks
Matthew Leach (2):
clk: samsung: fixup endian in pll clk
clk: samsung: exynos4: fixup reg access on be
drivers/clk/samsung/clk-cpu.c | 131 +++++++++-
drivers/clk/samsung/clk-cpu.h | 4 +-
drivers/clk/samsung/clk-exynos-clkout.c | 2 +
drivers/clk/samsung/clk-exynos3250.c | 41 +--
drivers/clk/samsung/clk-exynos4.c | 64 +++--
drivers/clk/samsung/clk-exynos4415.c | 30 +--
drivers/clk/samsung/clk-exynos5250.c | 27 +-
drivers/clk/samsung/clk-exynos5260.c | 114 ++++----
drivers/clk/samsung/clk-exynos5410.c | 58 ++++-
drivers/clk/samsung/clk-exynos5420.c | 40 ++-
drivers/clk/samsung/clk-exynos5433.c | 432 +++++++++++++++++++------------
drivers/clk/samsung/clk-exynos5440.c | 12 +-
drivers/clk/samsung/clk-exynos7.c | 119 ++++-----
drivers/clk/samsung/clk-pll.c | 122 ++++-----
drivers/clk/samsung/clk-s3c2410-dclk.c | 5 +-
drivers/clk/samsung/clk-s3c2410.c | 2 -
drivers/clk/samsung/clk-s3c2412.c | 2 -
drivers/clk/samsung/clk-s3c2443.c | 2 -
drivers/clk/samsung/clk-s3c64xx.c | 2 -
drivers/clk/samsung/clk-s5pv210.c | 2 -
drivers/clk/samsung/clk.c | 14 +-
drivers/clk/samsung/clk.h | 22 +-
include/dt-bindings/clock/exynos5410.h | 76 ++++--
include/dt-bindings/clock/exynos5433.h | 3 +-
24 files changed, 812 insertions(+), 514 deletions(-)
--
Thanks,
Sylwester
next reply other threads:[~2016-06-13 13:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 13:10 Sylwester Nawrocki [this message]
2016-06-21 1:50 ` [GIT PULL] Samsung clk updates for 4.8 Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575EB0B2.8040001@samsung.com \
--to=s.nawrocki@samsung.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.