diff for duplicates of <575FA21E.80309@intel.com> diff --git a/a/1.txt b/N1/1.txt index 663014a..ac768ac 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -11,7 +11,7 @@ On 13/06/16 13:22, Jon Hunter wrote: >>>>> This allows to switch the card signal voltage level to 1.8V, >>>>> which is needed for any ultra high speed modes to work. >>>>> ->>>>> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org> +>>>>> Signed-off-by: Lucas Stach <dev@lynxeye.de> >>>>> --- >>>>> This needs the SDMMC memcomp pad calibration patches I just >>>>> sent out to be applied, otherwise the card voltage change will diff --git a/a/content_digest b/N1/content_digest index 441f71b..633a4d2 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -3,18 +3,10 @@ "ref\020160513172704.GA498@ulmo.ba.sec\0" "ref\0573DCDB3.80202@nvidia.com\0" "ref\0575E897A.5080508@nvidia.com\0" - "ref\0575E897A.5080508-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org\0" - "From\0Adrian Hunter <adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>\0" - "Subject\0Re: [PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" + "From\0adrian.hunter@intel.com (Adrian Hunter)\0" + "Subject\0[PATCH] ARM: tegra: beaver: allow SD card voltage to be changed\0" "Date\0Tue, 14 Jun 2016 09:20:14 +0300\0" - "To\0Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>" - Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org> - " Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" - "Cc\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>" - Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - " linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 13/06/16 13:22, Jon Hunter wrote:\n" @@ -30,7 +22,7 @@ ">>>>> This allows to switch the card signal voltage level to 1.8V,\n" ">>>>> which is needed for any ultra high speed modes to work.\n" ">>>>>\n" - ">>>>> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>\n" + ">>>>> Signed-off-by: Lucas Stach <dev@lynxeye.de>\n" ">>>>> ---\n" ">>>>> This needs the SDMMC memcomp pad calibration patches I just\n" ">>>>> sent out to be applied, otherwise the card voltage change will\n" @@ -121,4 +113,4 @@ "\n" If the driver doesn't support UHS-I modes then it must remove the cap flags. -f580a5454935e533f643e33fe85afc2b14e64f4af76940336b351db82225b55b +394c982995c784cb227dc156b153d059d8a89d63e46f1db50f01936857cc0bb6
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.