From: xuwei5@hisilicon.com (Wei Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] arm64: dts: hip06: Append hns node
Date: Tue, 28 Jun 2016 18:09:30 +0100 [thread overview]
Message-ID: <5772AF4A.2030801@hisilicon.com> (raw)
In-Reply-To: <1467093105-1568-3-git-send-email-wangkefeng.wang@huawei.com>
Hi Kefeng,
On 28/06/2016 06:51, Kefeng Wang wrote:
> There are four ports(2 GE, 2 XGE) in D03 board, append
> relevant nodes for them.
>
> Cc: Kejian Yan <yankejian@huawei.com>
> Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> ---
> arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 16 +++
> arch/arm64/boot/dts/hisilicon/hip06.dtsi | 215 ++++++++++++++++++++++++++++
> 2 files changed, 231 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
> index f3e5323..5562cf4 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
> @@ -25,6 +25,22 @@
> chosen { };
> };
>
> +ð0 {
> + status = "ok";
> +};
> +
> +ð1 {
> + status = "ok";
> +};
> +
> +ð2 {
> + status = "ok";
> +};
> +
> +ð3 {
> + status = "ok";
> +};
> +
> &usb_ohci {
> status = "ok";
> };
> diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> index 5927bc4..3eca430 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> @@ -279,6 +279,18 @@
> };
> };
>
> + mbigen_dsa at c0080000 {
> + compatible = "hisilicon,mbigen-v2";
> + reg = <0x0 0xc0080000 0x0 0x10000>;
> +
> + mbigen_dsaf0: intc_dsaf0 {
> + msi-parent = <&its_dsa 0x40800>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + num-pins = <409>;
> + };
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <2>;
> @@ -302,6 +314,209 @@
> dma-coherent;
> status = "disabled";
> };
> +
> + peri_c_subctrl: sub_ctrl_c at 60000000 {
> + compatible = "hisilicon,peri-c-subctrl","syscon";
> + reg = <0 0x60000000 0x0 0x10000>;
> + };
> +
> + dsaf_subctrl: dsaf_subctrl at c0000000 {
> + compatible = "hisilicon,dsaf-ctrl", "syscon";
> + reg = <0x0 0xc0000000 0x0 0x10000>;
> + };
> +
> + serdes_ctrl: sds_ctrl at c2200000 {
> + compatible = "hisilicon,serdes-syscon","syscon";
> + reg = <0 0xc2200000 0x0 0x80000>;
> + };
I found peri-c-subctrl, dsaf-ctrl and serdes-syscon are not documented
in the device tree binding documents.
I checked the net-next tree and also did not find it.
Could you check it as well?
Thanks!
The others is fine to me.
Best Regards,
Wei Xu
> +
> + mdio at 603c0000 {
> + compatible = "hisilicon,hns-mdio";
> + reg = <0x0 0x603c0000 0x0 0x1000>;
> + subctrl-vbase = <&peri_c_subctrl>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +
> + phy1: ethernet-phy at 1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> +
> + dsaf0: dsa at c7000000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "hisilicon,hns-dsaf-v2";
> + mode = "6port-16rss";
> + reg = <0x0 0xc5000000 0x0 0x890000
> + 0x0 0xc7000000 0x0 0x600000>;
> + reg-names = "ppe-base", "dsaf-base";
> + interrupt-parent = <&mbigen_dsaf0>;
> + subctrl-syscon = <&dsaf_subctrl>;
> + reset-field-offset = <0>;
> + interrupts =
> + <576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
> + <581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
> + <586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
> + <591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
> + <596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
> + <960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
> + <965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
> + <970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
> + <975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
> + <980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
> + <985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
> + <990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
> + <995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
> + <1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
> + <1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
> + <1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
> + <1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
> + <1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
> + <1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
> + <1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
> + <1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
> + <1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
> + <1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
> + <1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
> + <1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
> + <1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
> + <1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
> + <1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
> + <1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
> + <1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
> + <1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
> + <1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
> + <1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
> + <1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
> + <1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
> + <1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
> + <1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
> + <1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
> + <1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
> + <1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
> + <1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
> + <1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
> + <1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
> + <1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
> + <1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
> + <1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
> + <1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
> + <1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
> + <1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
> + <1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
> + <1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
> + <1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
> + <1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
> + <1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
> + <1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
> + <1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
> + <1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
> + <1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
> + <1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
> + <1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
> + <1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
> + <1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
> + <1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
> + <1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
> + <1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
> + <1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
> + <1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
> + <1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
> + <1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
> + <1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
> + <1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
> + <1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
> + <1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
> + <1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
> + <1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
> + <1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
> + <1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
> + <1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
> + <1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
> + <1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
> + <1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
> + <1340 1>, <1341 1>, <1342 1>, <1343 1>;
> +
> + desc-num = <0x400>;
> + buf-size = <0x1000>;
> + dma-coherent;
> +
> + port at 0 {
> + reg = <0>;
> + serdes-syscon = <&serdes_ctrl>;
> + port-rst-offset = <0>;
> + port-mode-offset = <0>;
> + media-type = "fiber";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + serdes-syscon= <&serdes_ctrl>;
> + port-rst-offset = <1>;
> + port-mode-offset = <1>;
> + media-type = "fiber";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + phy-handle = <&phy0>;
> + serdes-syscon= <&serdes_ctrl>;
> + port-rst-offset = <4>;
> + port-mode-offset = <2>;
> + media-type = "copper";
> + };
> +
> + port at 5 {
> + reg = <5>;
> + phy-handle = <&phy1>;
> + serdes-syscon= <&serdes_ctrl>;
> + port-rst-offset = <5>;
> + port-mode-offset = <3>;
> + media-type = "copper";
> + };
> + };
> +
> + eth0: ethernet at 4{
> + compatible = "hisilicon,hns-nic-v2";
> + ae-handle = <&dsaf0>;
> + port-idx-in-ae = <4>;
> + local-mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + dma-coherent;
> + };
> +
> + eth1: ethernet at 5{
> + compatible = "hisilicon,hns-nic-v2";
> + ae-handle = <&dsaf0>;
> + port-idx-in-ae = <5>;
> + local-mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + dma-coherent;
> + };
> +
> + eth2: ethernet at 0{
> + compatible = "hisilicon,hns-nic-v2";
> + ae-handle = <&dsaf0>;
> + port-idx-in-ae = <0>;
> + local-mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + dma-coherent;
> + };
> +
> + eth3: ethernet at 1{
> + compatible = "hisilicon,hns-nic-v2";
> + ae-handle = <&dsaf0>;
> + port-idx-in-ae = <1>;
> + local-mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + dma-coherent;
> + };
> };
>
> };
>
next prev parent reply other threads:[~2016-06-28 17:09 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 5:51 [PATCH 0/4] arm64: hisilicon: Hip0x dt/config update Kefeng Wang
2016-06-28 5:51 ` [PATCH 1/4] arm64: dts: hip05: kill hip05_hns.dtsi Kefeng Wang
2016-06-28 5:51 ` [PATCH 2/4] arm64: dts: hip06: Append hns node Kefeng Wang
2016-06-28 17:09 ` Wei Xu [this message]
2016-06-29 3:29 ` Kefeng Wang
2016-06-28 5:51 ` [PATCH 3/4] arm64: dts: hip06: Append sas node Kefeng Wang
2016-06-28 5:51 ` [PATCH 4/4] arm64: defconfig: Enable Hisi SAS and HNS Kefeng Wang
2016-06-29 3:27 ` [PATCH v2 0/5] arm64: hisilicon: Hip0x dt/config update Kefeng Wang
2016-06-29 3:27 ` [PATCH v2 1/5] arm64: dts: hip05: kill hip05_hns.dtsi Kefeng Wang
2016-06-29 3:27 ` [PATCH v2 2/5] dt-bindings: hisilicon: Add Hip05 and Hip06 system controller support Kefeng Wang
2016-07-06 1:43 ` Kefeng Wang
2016-06-29 3:27 ` [PATCH v2 3/5] arm64: dts: hip06: Append hns node Kefeng Wang
2016-06-29 3:27 ` [PATCH v2 4/5] arm64: dts: hip06: Append sas node Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 0/5] arm64: hisilicon: Hip0x dt/config update Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 1/5] arm64: dts: hip05: kill hip05_hns.dtsi Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 2/5] dt-bindings: hisilicon: Add Hip05 and Hip06 system controller support Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 3/5] arm64: dts: hip06: Append hns node Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 4/5] arm64: dts: hip06: Append sas node Kefeng Wang
2016-08-15 7:03 ` [PATCH v3 5/5] arm64: defconfig: Enable Hisi SAS and HNS Kefeng Wang
2016-08-24 15:12 ` [PATCH v3 0/5] arm64: hisilicon: Hip0x dt/config update Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5772AF4A.2030801@hisilicon.com \
--to=xuwei5@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.