From: Jesus Delgado <jdelgado@gmail.com>
To: Brad Barnett <bahb@l8r.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Acer Aspire 1691WCLi no boot problem
Date: Fri, 29 Jul 2005 12:01:26 -0500 [thread overview]
Message-ID: <5786143705072910011b280f67@mail.gmail.com> (raw)
In-Reply-To: <20050729122015.73165b54@be.back.l8r.net>
Hi all:
Iam have is the same problems with emachines M6807.
Any Idea?
On 7/29/05, Brad Barnett <bahb@l8r.net> wrote:
>
>
>
> Hey,
>
> I have a very odd problem with an Acer Aspire 1691WCLi. This laptop will
> simply not boot with any Debian precompiled kernel, with the exception of
> Debian's 2.4.27-2 initrd kernel. I have compiled my own kernels, using a
> vast array of options, 2.6.11, 2.6.12, 2.6.12.3, 2.6.13-rc4 and 2.4.27,
> they also all fail in exactly the same way. I have tried with and without
> initrd, acpi, 386 or other processor options, as well as very lean,
> stripped down kernels. I have tried with both lilo and grub, but both
> result in the same hang.
>
> Lilo or grub boots the kernel, and I see the classic:
>
> boot: vmlinuz
> Loading vmlinuz.................................................
> BIOS data check successful
> Uncompressiong Linux... Ok. booting the kernel.
> _
>
>
> That's it. A screencap can be had here, although it does not tell much else:
>
> http://be.back.l8r.net:8000/no_boot.jpg
>
> Debian's 2.4.27-2 boots fine, and this is what really annoys me. I took
> Debian's 2.4.27-2 initrd config from /boot, ran make oldconfig on a fresh
> 2.4.27 tree (some minor options were different due to Debian's
> backpatching). This image _still_ would not boot.
>
> Does anyone have any suggestions? If needed, I could compile a few more
> kernels, change GCC versions (if anyone thinks that would help) and so on.
> However, my goal here is to get 2.6 working in order to support various
> bits of hardware on this laptop.
>
> There are very few bios options to change. :/
>
> Pentium M 725, 512M ram.
>
> LSPCI shows:
>
> 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
> 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML ExpressGraphics Controller (rev 03)
> 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
> 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
> 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
> 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
> 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
> 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
> 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
> 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
> 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
> 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
> 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
> 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
> 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
> 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
> 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
> 0000:06:01.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
> 0000:06:01.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller
> 0000:06:01.3 Unknown mass storage controller: Texas Instruments Texas Instruments PCIxx21Integrated FlashMedia Controller
> 0000:06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
> 0000:06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet(rev 03)
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2005-07-29 17:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-29 16:20 Acer Aspire 1691WCLi no boot problem Brad Barnett
2005-07-29 17:01 ` Jesus Delgado [this message]
2005-07-31 21:35 ` Alexey Dobriyan
2005-08-02 17:21 ` Bill Davidsen
-- strict thread matches above, loose matches on Subject: below --
2005-07-29 16:20 Brad Barnett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5786143705072910011b280f67@mail.gmail.com \
--to=jdelgado@gmail.com \
--cc=bahb@l8r.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.