From: Tony <tony.makkiel@daqri.com>
To: akpm@linux-foundation.org, j.anaszewski@samsung.com,
mika.westerberg@linux.intel.com, mm-commits@vger.kernel.org,
linux-leds@vger.kernel.org
Subject: Re: + drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch added to -mm tree
Date: Wed, 13 Jul 2016 11:29:12 +0100 [thread overview]
Message-ID: <578617F8.7070208@daqri.com> (raw)
In-Reply-To: <5785651c.d2JFDzyQUJLxRsYu%akpm@linux-foundation.org>
Thank you for spotting this Andrew.
Tested working with my setup.
On 12/07/16 22:46, akpm@linux-foundation.org wrote:
>
> The patch titled
> Subject: drivers/leds/leds-lp3952.c: work around gcc-4.4.4 union initializer bug
> has been added to the -mm tree. Its filename is
> drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch
>
> This patch should soon appear at
> http://ozlabs.org/~akpm/mmots/broken-out/drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch
> and later at
> http://ozlabs.org/~akpm/mmotm/broken-out/drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch
>
> Before you just go and hit "reply", please:
> a) Consider who else should be cc'ed
> b) Prefer to cc a suitable mailing list as well
> c) Ideally: find the original patch on the mailing list and do a
> reply-to-all to that, adding suitable additional cc's
>
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
> The -mm tree is included into linux-next and is updated
> there every 3-4 working days
>
> ------------------------------------------------------
> From: Andrew Morton <akpm@linux-foundation.org>
> Subject: drivers/leds/leds-lp3952.c: work around gcc-4.4.4 union initializer bug
>
> drivers/leds/leds-lp3952.c: In function 'lp3952_set_pattern_gen_cmd':
> drivers/leds/leds-lp3952.c:156: error: unknown field 'r' specified in initializer
> drivers/leds/leds-lp3952.c:156: warning: missing braces around initializer
> drivers/leds/leds-lp3952.c:156: warning: (near initialization for 'line.<anonymous>')
> drivers/leds/leds-lp3952.c:157: error: unknown field 'g' specified in initializer
> drivers/leds/leds-lp3952.c:157: warning: excess elements in struct initializer
> drivers/leds/leds-lp3952.c:157: warning: (near initialization for 'line')
> drivers/leds/leds-lp3952.c:158: error: unknown field 'b' specified in initializer
> drivers/leds/leds-lp3952.c:158: warning: excess elements in struct initializer
> drivers/leds/leds-lp3952.c:158: warning: (near initialization for 'line')
> drivers/leds/leds-lp3952.c:159: error: unknown field 'cet' specified in initializer
> drivers/leds/leds-lp3952.c:159: warning: excess elements in struct initializer
> drivers/leds/leds-lp3952.c:159: warning: (near initialization for 'line')
> drivers/leds/leds-lp3952.c:160: error: unknown field 'tt' specified in initializer
> drivers/leds/leds-lp3952.c:161: warning: excess elements in struct initializer
> drivers/leds/leds-lp3952.c:161: warning: (near initialization for 'line')
>
> Fixes: 1574a45ad7467d6a8c6 ("leds: LED driver for TI LP3952 6-Channel Color LED")
> Cc: Tony Makkiel <tony.makkiel@daqri.com>
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
> drivers/leds/leds-lp3952.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff -puN drivers/leds/leds-lp3952.c~drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug drivers/leds/leds-lp3952.c
> --- a/drivers/leds/leds-lp3952.c~drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug
> +++ a/drivers/leds/leds-lp3952.c
> @@ -153,11 +153,15 @@ static int lp3952_set_pattern_gen_cmd(st
> {
> int ret;
> struct ptrn_gen_cmd line = {
> - .r = r,
> - .g = g,
> - .b = b,
> - .cet = cet,
> - .tt = tt
> + {
> + {
> + .tt = tt,
> + .b = b,
> + .cet = cet,
> + .g = g,
> + .r = r,
> + },
> + },
> };
>
> if (cmd_index >= LP3952_CMD_REG_COUNT)
> _
>
> Patches currently in -mm which might be from akpm@linux-foundation.org are
>
> i-need-old-gcc.patch
> arch-alpha-kernel-systblss-remove-debug-check.patch
> arm-arch-arm-include-asm-pageh-needs-personalityh.patch
> ocfs2-improve-recovery-performance-v2-fix.patch
> ocfs2-dlm-disable-bug_on-when-dlm_lock_res_dropping_ref-is-cleared-before-dlm_deref_lockres_done_handler-fix.patch
> mm.patch
> mm-reorganize-slab-freelist-randomization-fix.patch
> mm-balloon-use-general-non-lru-movable-page-feature-fix.patch
> mm-compaction-split-freepages-without-holding-the-zone-lock-fix-2.patch
> mm-frontswap-convert-frontswap_enabled-to-static-key-checkpatch-fixes.patch
> mm-add-nr_zsmalloc-to-vmstat-fix.patch
> mm-memcg-use-consistent-gfp-flags-during-readahead-checkpatch-fixes.patch
> mm-thp-make-swapin-readahead-under-down_read-of-mmap_sem-fix-2-fix.patch
> mm-fix-build-warnings-in-linux-compactionh-fix.patch
> mm-update-the-comment-in-__isolate_free_page-checkpatch-fixes.patch
> mm-zsmalloc-add-per-class-compact-trace-event-checkpatch-fixes.patch
> nvme-dont-allocate-unused-nvme_major-fix.patch
> treewide-replace-obsolete-_refok-by-__ref-checkpatch-fixes.patch
> printk-create-pr_level-functions-fix.patch
> kexec-ensure-user-memory-sizes-do-not-wrap-fix.patch
> kexec-allow-architectures-to-override-boot-mapping-fix.patch
> linux-next-rejects.patch
> drivers-net-wireless-intel-iwlwifi-dvm-calibc-fix-min-warning.patch
> drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch
> bitmap-bitmap_equal-memcmp-optimization-fix.patch
> kernel-forkc-export-kernel_thread-to-modules.patch
> slab-leaks3-default-y.patch
>
next prev parent reply other threads:[~2016-07-13 10:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 21:46 + drivers-leds-leds-lp3952c-work-around-gcc-444-union-initializer-bug.patch added to -mm tree akpm
2016-07-13 10:29 ` Tony [this message]
2016-07-13 10:51 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=578617F8.7070208@daqri.com \
--to=tony.makkiel@daqri.com \
--cc=akpm@linux-foundation.org \
--cc=j.anaszewski@samsung.com \
--cc=linux-leds@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.