All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Dave Gordon <david.s.gordon@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/5] drm/i915/guc: refactor guc_init_doorbell_hw()
Date: Tue, 19 Jul 2016 15:51:58 +0100	[thread overview]
Message-ID: <578E3E8E.3090908@linux.intel.com> (raw)
In-Reply-To: <1468933157-22412-2-git-send-email-david.s.gordon@intel.com>


On 19/07/16 13:59, Dave Gordon wrote:

Commit message missing! :)

> Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
> ---
>   drivers/gpu/drm/i915/i915_guc_submission.c | 54 +++++++++++++++++-------------
>   1 file changed, 30 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
> index d8402e4..dc5f485 100644
> --- a/drivers/gpu/drm/i915/i915_guc_submission.c
> +++ b/drivers/gpu/drm/i915/i915_guc_submission.c
> @@ -698,32 +698,47 @@ static void gem_release_guc_obj(struct drm_i915_gem_object *obj)
>   	kfree(client);
>   }
>
> +/* Check that a doorbell register is in the expected state */
> +static bool guc_doorbell_check(struct intel_guc *guc, uint16_t db_id)
> +{
> +	struct drm_i915_private *dev_priv = guc_to_i915(guc);
> +	i915_reg_t drbreg = GEN8_DRBREGL(db_id);
> +	uint32_t value = I915_READ(drbreg);
> +	bool enabled = (value & GUC_DOORBELL_ENABLED) != 0;
> +	bool expected = test_bit(db_id, guc->doorbell_bitmap);
> +
> +	if (enabled == expected)
> +		return true;
> +
> +	DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) 0x%x, should be %s\n",
> +			 db_id, drbreg.reg, value,
> +			 expected ? "active" : "inactive");
> +
> +	return false;
> +}
> +
>   /*
>    * Borrow the first client to set up & tear down each unused doorbell
>    * in turn, to ensure that all doorbell h/w is (re)initialised.
>    */
>   static void guc_init_doorbell_hw(struct intel_guc *guc)
>   {
> -	struct drm_i915_private *dev_priv = guc_to_i915(guc);
>   	struct i915_guc_client *client = guc->execbuf_client;
> -	uint16_t db_id, i;
> -	int err;
> +	uint16_t db_id;
> +	int i, err;
>
> +	/* Save client's original doorbell selection */
>   	db_id = client->doorbell_id;
>
>   	for (i = 0; i < GUC_MAX_DOORBELLS; ++i) {
> -		i915_reg_t drbreg = GEN8_DRBREGL(i);
> -		u32 value = I915_READ(drbreg);
> -
> -		if (test_bit(i, guc->doorbell_bitmap))
> +		/* Skip if doorbell is OK */
> +		if (guc_doorbell_check(guc, i))
>   			continue;
>
>   		err = guc_update_doorbell_id(guc, client, i);
> -
> -		/* Report update failure or unexpectedly active doorbell */
> -		if (err || (i != db_id && (value & GUC_DOORBELL_ENABLED)))
> -			DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) was 0x%x, err %d\n",
> -					  i, drbreg.reg, value, err);
> +		if (err)
> +			DRM_DEBUG_DRIVER("Doorbell %d update failed, err %d\n",
> +					i, err);
>   	}
>
>   	/* Restore to original value */
> @@ -732,18 +747,9 @@ static void guc_init_doorbell_hw(struct intel_guc *guc)
>   		DRM_ERROR("Failed to restore doorbell to %d, err %d\n",
>   			db_id, err);
>
> -	for (i = 0; i < GUC_MAX_DOORBELLS; ++i) {
> -		i915_reg_t drbreg = GEN8_DRBREGL(i);
> -		u32 value = I915_READ(drbreg);
> -
> -		if (test_bit(i, guc->doorbell_bitmap))
> -			continue;
> -
> -		if (i != db_id && (value & GUC_DOORBELL_ENABLED))
> -			DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) finally 0x%x\n",
> -					  i, drbreg.reg, value);
> -
> -	}
> +	/* Read back & verify all doorbell registers */
> +	for (i = 0; i < GUC_MAX_DOORBELLS; ++i)
> +		(void)guc_doorbell_check(guc, i);
>   }
>
>   /**
>

Otherwise looks fine.

Regards,

Tvrtko

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-07-19 14:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-19 12:59 [PATCH 1/5] drm/i915/guc: doorbell reset should avoid used doorbells Dave Gordon
2016-07-19 12:59 ` [PATCH 2/5] drm/i915/guc: refactor guc_init_doorbell_hw() Dave Gordon
2016-07-19 14:51   ` Tvrtko Ursulin [this message]
2016-07-19 12:59 ` [PATCH 3/5] drm/i915/guc: use a separate GuC client for each engine Dave Gordon
2016-07-19 15:02   ` Tvrtko Ursulin
2016-07-19 15:13     ` Dave Gordon
2016-07-19 12:59 ` [PATCH 4/5] drm/i915/guc: add engine mask to GuC client & pass to GuC Dave Gordon
2016-07-19 15:06   ` Tvrtko Ursulin
2016-07-27 20:06   ` kbuild test robot
2016-07-19 12:59 ` [PATCH 5/5] drm/i915/guc: use for_each_engine_id() where appropriate Dave Gordon
2016-07-19 15:09   ` Tvrtko Ursulin
2016-07-19 14:16 ` ✗ Ro.CI.BAT: failure for series starting with [1/5] drm/i915/guc: doorbell reset should avoid used doorbells Patchwork
2016-07-19 15:07   ` Dave Gordon
2016-07-19 14:43 ` [PATCH 1/5] " Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=578E3E8E.3090908@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=david.s.gordon@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.