From: stefano babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
Date: Thu, 21 Jul 2016 10:48:21 +0200 [thread overview]
Message-ID: <57908C55.9050005@denx.de> (raw)
In-Reply-To: <CAOMZO5ADg5y0g127CsSPG+aMy4Q7U2UdCBDPbMP=WPHymNVH+A@mail.gmail.com>
Hi Breno,
Am 20.07.2016 um 22:20 schrieb Fabio Estevam:
> On Wed, Jul 20, 2016 at 4:55 PM, Breno Lima <breno.lima@nxp.com> wrote:
>> Commit c1ebf54868359005 ("imx_common: Return MMCSD_MODE_FS in spl_boot_mode()
>> also for EXTFS") causes SPL breakage on wandboard:
>>
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ** First descriptor is NOT a primary desc on 0:1 **
>> spl: no partition table found
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> This error is seen when SPL and u-boot.img are stored in the raw SD card
>> partition.
>>
>> This reverts commit c1ebf54868359005c32944c1473668d5fcaca158.
>>
>> Signed-off-by: Breno Lima <breno.lima@nxp.com>
> Thanks for the fix:
>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
prev parent reply other threads:[~2016-07-21 8:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 19:55 [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS" Breno Lima
2016-07-20 20:20 ` Fabio Estevam
2016-07-21 8:48 ` stefano babic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57908C55.9050005@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.