From: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
To: Michael Bringmann <mwb@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Subject: Re: [PATCH 1/8] powerpc/firmware: Add definitions for new firmware features.
Date: Mon, 25 Jul 2016 17:01:28 -0700 [thread overview]
Message-ID: <5796A858.7010802@linux.vnet.ibm.com> (raw)
In-Reply-To: <5e8da0dd-8f11-2e4d-720c-6ff22c781b32@linux.vnet.ibm.com>
On 07/25/2016 03:21 PM, Michael Bringmann wrote:
> Firmware Features: Define new bit flags representing the presence of
> new device tree properties "ibm,drc-info", and "ibm,dynamic-memory-v2".
> These flags are used to tell the front end processor when the Linux
> kernel supports the new properties, and by the front end processor to
> tell the Linux kernel that the new properties are present in the devie
> tree.
>
> Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
> ---
> diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
> index b062924..a9d66d5 100644
> --- a/arch/powerpc/include/asm/firmware.h
> +++ b/arch/powerpc/include/asm/firmware.h
> @@ -51,6 +51,8 @@
> #define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000)
> #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
> #define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000)
> +#define FW_FEATURE_RPS_DM2 ASM_CONST(0x0000000400000000)
> +#define FW_FEATURE_RPS_DRC_INFO ASM_CONST(0x0000000800000000)
I can't say that these names are my favorite. Especially _RPS_DM2. I
haven't actually seen the PAPR updates that define these things, but I
would hope that these had more self explanatory names. I'm not really
sure what _RPS_ means. Like I said I haven't seen the PAPR update so
maybe that is a new acronym defined there.
-Tyrel
>
> #ifndef __ASSEMBLY__
>
> @@ -66,7 +68,8 @@ enum {
> FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
> FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
> FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
> - FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
> + FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
> + FW_FEATURE_RPS_DM2 | FW_FEATURE_RPS_DRC_INFO,
> FW_FEATURE_PSERIES_ALWAYS = 0,
> FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
> FW_FEATURE_POWERNV_ALWAYS = 0,
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index 7f436ba..b9a1534 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -155,6 +203,8 @@ struct of_drconf_cell {
> #define OV5_PFO_HW_842 0x0E40 /* PFO Compression Accelerator */
> #define OV5_PFO_HW_ENCR 0x0E20 /* PFO Encryption Accelerator */
> #define OV5_SUB_PROCESSORS 0x0F01 /* 1,2,or 4 Sub-Processors supported */
> +#define OV5_RPS_DM2 0x1680 /* Redef Prop Structures: dyn-mem-v2 */
> +#define OV5_RPS_DRC_INFO 0x1640 /* Redef Prop Structures: drc-info */
>
> /* Option Vector 6: IBM PAPR hints */
> #define OV6_LINUX 0x02 /* Linux is our OS */
> diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
> index 8c80588..00243ee 100644
> --- a/arch/powerpc/platforms/pseries/firmware.c
> +++ b/arch/powerpc/platforms/pseries/firmware.c
> @@ -111,6 +111,8 @@ static __initdata struct vec5_fw_feature
> vec5_fw_features_table[] = {
> {FW_FEATURE_TYPE1_AFFINITY, OV5_TYPE1_AFFINITY},
> {FW_FEATURE_PRRN, OV5_PRRN},
> + {FW_FEATURE_RPS_DM2, OV5_RPS_DM2},
> + {FW_FEATURE_RPS_DRC_INFO, OV5_RPS_DRC_INFO},
> };
>
> void __init fw_vec5_feature_init(const char *vec5, unsigned long len)
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
prev parent reply other threads:[~2016-07-26 0:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 22:21 [PATCH 1/8] powerpc/firmware: Add definitions for new firmware features Michael Bringmann
2016-07-26 0:01 ` Tyrel Datwyler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5796A858.7010802@linux.vnet.ibm.com \
--to=tyreld@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mwb@linux.vnet.ibm.com \
--cc=nfont@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.