All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	dri-devel@lists.freedesktop.org
Cc: daniel.vetter@ffwll.ch
Subject: Re: [GIT PULL] drm bridge drivers for 4.8 (updated)
Date: Tue, 9 Aug 2016 00:00:07 +0530	[thread overview]
Message-ID: <57A8CFAF.3090001@codeaurora.org> (raw)
In-Reply-To: <4903056.FBHOtWANEr@avalon>



On 8/4/2016 1:36 AM, Laurent Pinchart wrote:
> Hi Archit,
>
> On Tuesday 19 Jul 2016 12:06:41 Archit Taneja wrote:
>> Hi Dave,
>>
>> This is an update to the previous drm bridge pull request. The ADV7511
>> driver's conversion from slave encoder to bridge meant that its users
>> (the rcar-du kms driver) should use the bridge interface too. This pull
>> request now also contains a commit that updates the rcar-du's hdmi encoder
>> interface from slave encoder to bridge.
>>
>> The other updates are as before:
>>
>> - Converts the ADV7511 i2c slave encoder driver to a bridge driver.
>>    Adds support for the ADV7533 bridge chip.
>> - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.
>>
>> Thanks,
>> Archit
>>
>> The following changes since commit 2ae995887830b335f9bdab3040018071da54bcdb:
>>
>>    drm: Fix a typo in drm_ioctl.c (2016-06-30 12:04:44 +0300)
>>
>> are available in the git repository at:
>>
>>    https://github.com/boddob/linux.git drm_bridge_for_4.8
>>
>> for you to fetch changes up to 1d926114d8f4e9f138617b95c6cd377667c36369:
>>
>>    drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
>> (2016-07-18 08:58:45 +0530)
>>
>> ----------------------------------------------------------------
>> Andrey Gusakov (1):
>>        drm/bridge: tc358767: Add DPI to eDP bridge driver
>>
>> Archit Taneja (9):
>>        drm/i2c: adv7511: Convert to drm_bridge
>>        drm/i2c: adv7511: Move to bridge folder
>>        drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
>>        drm/bridge: adv7533: Initial support for ADV7533
>>        drm/bridge: adv7533: Create a MIPI DSI device
>>        drm/bridge: adv7533: Use internal timing generator
>>        drm/bridge: adv7533: Change number of DSI lanes dynamically
>>        dt-bindings: drm/bridge: Update bindings for ADV7533
>>        drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
>
> You've included the wrong version of that patch, it doesn't set encoder-
>> bridge, breaking HDMI output for rcar-du-drm :-(
>
> I'll send a fix shortly.

Sorry, was ooo. Thanks for fixing this.

Archit

>
>> Philipp Zabel (1):
>>        dt-bindings: tc358767: add DT documentation
>>
>>   .../bindings/display/bridge/adi,adv7511.txt        |   26 +-
>>   .../bindings/display/bridge/toshiba,tc358767.txt   |   53 +
>>   drivers/gpu/drm/bridge/Kconfig                     |   11 +
>>   drivers/gpu/drm/bridge/Makefile                    |    2 +
>>   drivers/gpu/drm/bridge/adv7511/Kconfig             |   15 +
>>   drivers/gpu/drm/bridge/adv7511/Makefile            |    3 +
>>   drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h  |  103 ++
>>   .../adv7511.c => bridge/adv7511/adv7511_drv.c}     |  324 +++--
>>   drivers/gpu/drm/bridge/adv7511/adv7533.c           |  265 ++++
>>   drivers/gpu/drm/bridge/tc358767.c                  | 1413 +++++++++++++++++
>>   drivers/gpu/drm/i2c/Kconfig                        |    6 -
>>   drivers/gpu/drm/i2c/Makefile                       |    2 -
>>   drivers/gpu/drm/rcar-du/Makefile                   |    4 +-
>>   drivers/gpu/drm/rcar-du/rcar_du_encoder.c          |    3 +-
>>   drivers/gpu/drm/rcar-du/rcar_du_encoder.h          |    7 +-
>>   drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c          |  116 --
>>   drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h          |   31 -
>>   drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c          |   68 +-
>>   18 files changed, 2120 insertions(+), 332 deletions(-)
>>   create mode 100644
>> Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
>> create mode 100644 drivers/gpu/drm/bridge/adv7511/Kconfig
>>   create mode 100644 drivers/gpu/drm/bridge/adv7511/Makefile
>>   rename drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h (82%)
>>   rename drivers/gpu/drm/{i2c/adv7511.c => bridge/adv7511/adv7511_drv.c}
>> (80%) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7533.c
>>   create mode 100644 drivers/gpu/drm/bridge/tc358767.c
>>   delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
>>   delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      reply	other threads:[~2016-08-08 18:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-17  8:39 [GIT PULL] drm bridge drivers for 4.8 Archit Taneja
2016-07-17  8:53 ` Laurent Pinchart
2016-07-18  3:36   ` Archit Taneja
2016-07-19  6:36 ` [GIT PULL] drm bridge drivers for 4.8 (updated) Archit Taneja
2016-08-03 20:06   ` Laurent Pinchart
2016-08-08 18:30     ` Archit Taneja [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57A8CFAF.3090001@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.