Re: [Regression] "irqdomain: Don't set type when mapping an IRQ" breaks nexus7 gpio buttons

[Marc Zyngier <marc.zyngier@arm.com>]

On 11/08/16 12:45, Marc Zyngier wrote:
> On 11/08/16 10:47, Jon Hunter wrote:
>>
>> On 11/08/16 09:37, Marc Zyngier wrote:
>>> On 08/08/16 22:48, Linus Walleij wrote:
>>>> On Sat, Aug 6, 2016 at 1:45 AM, John Stultz <john.stultz@linaro.org> wrote:
>>>>
>>>>> @@ -614,7 +615,11 @@ unsigned int irq_create_fwspec_mapping(struct
>>>>> irq_fwspec *fwspec)
>>>>>                  * it now and return the interrupt number.
>>>>>                  */
>>>>>                 if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) {
>>>>> -                       irq_set_irq_type(virq, type);
>>>>> +                       irq_data = irq_get_irq_data(virq);
>>>>> +                       if (!irq_data)
>>>>> +                               return 0;
>>>>> +
>>>>> +                       irqd_set_trigger_type(irq_data, type);
>>>>>                         return virq;
>>>>>                 }
>>>>>
>>>>> If I revert just that, it works again.
>>>>
>>>> This makes my platform work too.
>>>> Tested-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Hmmm. I'm now booting your kernel on the APQ8060, and reverting this
>>> hunk doesn't fix it for me. I'm confused...
>>>
>>> The interesting part is this:
>>> 109:     100000          0   msmgpio  88 Level     (null)
>>
>> 88 is the pm8058 parent interrupt and so I am surprised you would even
>> see this in /proc/interrupts as it should be a chained interrupt, right?
> 
> That's because it repeatedly fires without a proper handler, and only
> appears then.
> 
>> Are you seeing this with all the ethernet updates for the APQ8060 in
>> Linus' branch? I am curious what you see with stock v4.8-rc1 and if
>> interrupts work ok with the change I had proposed. Hard to tell if there
>> is more than one issue here.
> 
> (mostly) stock v4.8-rc1 exhibits the same issue, and your fix doesn't
> help this particular issue. Reverting your fix *and* applying the above
> revert makes it work again. Which is just papering over the issue, as it
> only does something when the interrupt is seen for a second time.

Also: this behaviour only affects the second cascade (from the pm8058 to
the tlmm). I can perfectly configure the first one (from the tlmm to the
GIC) with your fix.

	M.
-- 
Jazz is not dead. It just smells funny...