Am Mittwoch, 31. August 2016, 04:30:06 schrieb Caesar Wang:

This patch adds needed gamc information for rk3399,
also support the gmac pd.

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 90
++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 32aebc8..53ac651 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -200,6 +200,26 @@
 		};
 	};

+	gmac: eth@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		rockchip,grf = <&grf>;

should move below the reset-names .

+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		power-domains = <&power RK3399_PD_GMAC>;

The driver core should handle regular power-domain handling on device creation 
already, right? So I should be able to apply patches 3 and 4 even without the 
dwmac patches, right?

Also if resending please move power-domains above resets

Heiko

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip