From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements
Date: Fri, 30 Sep 2016 07:14:45 +0200 [thread overview]
Message-ID: <57EDF4C5.7080804@denx.de> (raw)
In-Reply-To: <1471418009-12660-1-git-send-email-hs@denx.de>
Hello Andreas,
Am 17.08.2016 um 09:13 schrieb Heiko Schocher:
> This series add some missing things for an at91sam9g15
> board, which gets not mainlined, but there are common
> fixes, which are posted with this patchserie.
>
> 2 important things:
> - enable icache for AT91 based boards
> speeds up them a lot, for example reading 8MiB from
> an SPI NOR flash into RAM takes with icache off ~15 seconds
> with icache enabled only ~5 seconds.
>
> gurnard board defines a board specific enable_caches()
> function which enables dcache .. with acomment that this
> breaks Ethernet MAC ... I removed this board specific
> function, and dcache enable functions should be
> added in arch/arm/mach-at91/arm926ejs/cache.c
>
> - SPL clock fix, posted as RFC, as it may breaks other boards.
> If so, we may make clock settings in SPL board configurable
> through a weak function?
>
> buildman finds no new errors/warnings with the patches
> from this patchseries applied.
>
>
> Heiko Schocher (6):
> arm: at91: mpddrc: add missing MPDDRC_MD defines
> ARM: at91: clock: correct PRES offset for at91sam9x5
> arm, at91: add icache support
> arm, at91: add some missing fields in PIO struct
> at91: add function to set IO drive
> [RFC] at91: SPL clock fix for AT91SAM9G15 based boards.
>
> arch/arm/mach-at91/arm926ejs/Makefile | 1 +
> arch/arm/mach-at91/arm926ejs/cache.c | 29 ++++++++++++++++++++++++++
> arch/arm/mach-at91/arm926ejs/clock.c | 6 ++++++
> arch/arm/mach-at91/include/mach/at91_pio.h | 11 +++++++++-
> arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 3 +++
> arch/arm/mach-at91/include/mach/gpio.h | 2 ++
> arch/arm/mach-at91/spl_at91.c | 13 +++++++++---
> board/bluewater/gurnard/gurnard.c | 6 ------
> drivers/gpio/at91_gpio.c | 29 ++++++++++++++++++++++++++
> 9 files changed, 90 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/mach-at91/arm926ejs/cache.c
>
This patchset is now pending for more than 1 month ... are there
any issues, or do you plan to apply it?
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2016-09-30 5:14 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 7:13 [U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements Heiko Schocher
2016-08-17 7:13 ` [U-Boot] [PATCH 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines Heiko Schocher
2016-09-18 2:07 ` Wenyou.Yang at microchip.com
2016-10-06 21:07 ` Andreas Bießmann
2016-10-28 16:49 ` [U-Boot] [U-Boot, " Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5 Heiko Schocher
2016-09-18 2:11 ` Wenyou.Yang at microchip.com
2016-10-06 21:40 ` Andreas Bießmann
2016-10-28 9:47 ` [U-Boot] [U-Boot, " Andreas Bießmann
2016-10-28 16:49 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 3/6] arm, at91: add icache support Heiko Schocher
2016-08-18 3:45 ` Simon Glass
2016-10-06 21:58 ` Andreas Bießmann
2016-10-28 16:49 ` [U-Boot] [U-Boot,3/6] " Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 4/6] arm, at91: add some missing fields in PIO struct Heiko Schocher
2016-09-18 2:09 ` Wenyou.Yang at microchip.com
2016-10-06 22:06 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 5/6] at91: add function to set IO drive Heiko Schocher
2016-09-18 2:05 ` Wenyou.Yang at microchip.com
2016-10-06 22:11 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 6/6] [RFC] at91: SPL clock fix for AT91SAM9G15 based boards Heiko Schocher
2016-09-18 2:19 ` Wenyou.Yang at microchip.com
2016-10-06 22:34 ` Andreas Bießmann
2016-09-30 5:14 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57EDF4C5.7080804@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.