On 2016年10月12日 17:26, Burton, Ross wrote:

On 12 October 2016 at 03:37, <kai.kang@windriver.com> wrote:

gcc checks threads and leak sanitizers support when do configure. If not
supported, packages of tsan and lsan are empty. If add such package to
image it fails to build:

| ERROR: core-image-minimal-1.0-r0 do_rootfs: libtsan-dev not found in the feeds
| ERROR: core-image-minimal-1.0-r0 do_rootfs: This is often caused by an empty
| package declared in a recipe's PACKAGES variable. (Empty packages are not
| constructed unless ALLOW_EMPTY_<pkg> = '1' is used.)

Not sure I'm understand where those dependencies are coming from, how would I replicate this?

gcc checks tsan and lsan support in source file gcc/libsanitizer/configure.tgt, it seems only support x86_64. Then tsan and lsan related packages will be empty for other target.
For qemuarm project, add in local.conf:

IMAGE_INSTALL_append = " libtsan"

Then run 'bitbake core-image-minimal", it shows errors:

ERROR: core-image-minimal-1.0-r0 do_rootfs: libtsan not found in the feeds (qemuarm armv5te armv5e armv5t armv5 armv4t armv4 arm noarch any all) in /buildarea3/kkang/poky-20141111/builds/qemuarm-Aug05/tmp/deploy/rpm.
ERROR: core-image-minimal-1.0-r0 do_rootfs: This is often caused by an empty package declared in a recipe's PACKAGES variable. (Empty packages are not constructed unless ALLOW_EMPTY_<pkg> = '1' is used.)
ERROR: core-image-minimal-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /buildarea3/kkang/poky-20141111/builds/qemuarm-Aug05/tmp/work/qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.24600
ERROR: Task (/buildarea3/kkang/poky-20141111/poky/meta/recipes-core/images/core-image-minimal.bb:do_rootfs) failed with exit code '1'

Regards,
Kai

Ross

-- 
Regards,
Neil | Kai Kang