From: Jose Abreu <Jose.Abreu@synopsys.com>
To: Shashank Sharma <shashank.sharma@intel.com>,
dri-devel@lists.freedesktop.org, jim.bride@linux.intel.com
Cc: daniel.vetter@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v3 0/4]: Picture aspect ratio support in DRM layer
Date: Mon, 17 Oct 2016 12:31:05 +0100 [thread overview]
Message-ID: <5804B679.5010507@synopsys.com> (raw)
In-Reply-To: <1476703952-14561-1-git-send-email-shashank.sharma@intel.com>
Hi Shashank,
On 17-10-2016 12:32, Shashank Sharma wrote:
> This patch series adds 4 patches.
> - The first two patches add aspect ratio support in DRM layes
> - Next two patches add new aspect ratios defined in CEA-861-F
> supported for HDMI 2.0 4k modes.
>
> Adding aspect ratio support in DRM layer:
> - The CEA videmodes contain aspect ratio information, which we
> parse when we read the modes from EDID. But while transforming
> user_mode to kernel_mode or viceversa, DRM layer lose this
> information.
> - HDMI compliance testing for CEA modes, expects the AVI info frames
> to contain exact VIC no for the 'video mode under test'. Now CEA
> modes have different VIC for same modes but different aspect ratio
> for example:
> VIC 2 = 720x480@60 4:3
> VIC 3 = 720x480@60 16:9
> In this way, lack of aspect ratio information, can cause wrong VIC
> no in AVI IF, causing HDMI complaince test to fail.
> - This patch set adds code, which embeds the aspect ratio information
> also in DRM video mode flags, and uses it while comparing two modes.
>
> Adding new aspect ratios for HDMI 2.0
> - CEA-861-F defines two new aspect ratios, to be used for 4k HDMI 2.0
> modes.
> - 64:27
> - 256:135
> Last two patches in the series, adds code to handle these new
> aspect ratios.
>
> V2: Fixed review comments from Sean, Emil, Daniel
> V3: Fixed review comments from Jim Bride, got r-b for all patches
>
> Shashank Sharma (4):
> drm: add picture aspect ratio flags
> drm: Add aspect ratio parsing in DRM layer
> video: Add new aspect ratios for HDMI 2.0
> drm: Add and handle new aspect ratios in DRM layer
I am using the previous version of these patches, the
functionality remains the same so you can add my reviewed-by for
the whole series if you want. Are you still planning in sending
the patches for the new VIC's introduced in CEA-861-F?
>
> drivers/gpu/drm/drm_modes.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> drivers/video/hdmi.c | 4 ++++
> include/linux/hdmi.h | 2 ++
> include/uapi/drm/drm_mode.h | 24 +++++++++++++++++++-----
> 4 files changed, 68 insertions(+), 5 deletions(-)
>
Best regards,
Jose Miguel Abreu
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-10-17 11:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 11:32 [PATCH v3 0/4]: Picture aspect ratio support in DRM layer Shashank Sharma
2016-10-17 11:31 ` Jose Abreu [this message]
2016-10-17 11:34 ` Sharma, Shashank
2016-10-17 11:32 ` [PATCH v3 1/4] drm: add picture aspect ratio flags Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 2/4] drm: Add aspect ratio parsing in DRM layer Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 3/4] video: Add new aspect ratios for HDMI 2.0 Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 4/4] drm: Add and handle new aspect ratios in DRM layer Shashank Sharma
2016-10-17 11:53 ` ✗ Fi.CI.BAT: warning for : Picture aspect ratio support in DRM layer (rev2) Patchwork
2016-10-17 11:59 ` Saarinen, Jani
-- strict thread matches above, loose matches on Subject: below --
2016-10-17 11:22 [PATCH v3 0/4] Picture aspect ratio support in DRM layer Shashank Sharma
2016-10-17 11:13 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5804B679.5010507@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jim.bride@linux.intel.com \
--cc=shashank.sharma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.