From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from amanaus.varma-el.com (unknown [195.144.244.147]) by ozlabs.org (Postfix) with ESMTP id 461422BF07 for ; Fri, 24 Dec 2004 05:30:33 +1100 (EST) Date: Thu, 23 Dec 2004 21:04:33 +0300 From: Andrey Volkov Message-ID: <581835436.20041223210433@varma-el.com> To: Clemens Koller In-Reply-To: <41B97BC7.3000200@anagramm.de> References: <20041210015932.A3B692BDA0@ozlabs.org> <200412100845.14486.g.jaeger@sysgo.com> <41B97BC7.3000200@anagramm.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: linuxppc-embedded@ozlabs.org Subject: Re: video card for Lite5200 Reply-To: Andrey Volkov List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Clemens, Friday, December 10, 2004, 1:34:47 PM, you wrote: > Yes, the Fujitsu Coral P should work also. > I use a Silicon Motion Inc. SM501 Voyager GX PCI Demo Board right now > which is supposed to work with all the embedded systems. You can get > that board for about EUR 495.- in Germany. > I am currently working on the framebuffer drivers for the Voyager on > PPC. Things seem to make good progress, here (there is an image on > screen :-). There is also an Epson or Asilient solution for embedded > systems, maybe you can check that also. YMMV Could you send me your kernel .config file for SM501? I try use it too, but kernel (2.6.10-rc2) always restarting, I think I forget, as usually, something somewhere :(. And, Clemens, how about PCI bug of MPC5200 and SM501 (PCI clock to Signal Valid Delay)? Are you doing something with demo board? Or it working ok from box? -- Best regards, Andrey Volkov