From: ryadav-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
To: Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
hoegsberg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: Re: [DPU PATCH 07/19] drm/msm: dpu_encoder_phys_vid: Replace DPU_EVT with tracepoints
Date: Tue, 26 Jun 2018 16:17:26 +0530 [thread overview]
Message-ID: <582ad563bc619a6c03abf7587428fdae@codeaurora.org> (raw)
In-Reply-To: <20180620204841.56354-8-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On 2018-06-21 02:18, Sean Paul wrote:
> This patch converts all DPU_EVTs in dpu_encoder_phys_vid with either a
> DRM_* log
> message or a linux tracepoint.
>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
> .../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 36 ++++++++-----------
> drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 35 ++++++++++++++++++
> 2 files changed, 50 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> index 73e59382eeac..fc83745b48fa 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> @@ -458,12 +458,8 @@ static int
> dpu_encoder_phys_vid_control_vblank_irq(
> goto end;
> }
>
> - DPU_DEBUG_VIDENC(vid_enc, "[%pS] enable=%d/%d\n",
> - __builtin_return_address(0),
> - enable, atomic_read(&phys_enc->vblank_refcount));
> -
> - DPU_EVT32(DRMID(phys_enc->parent), enable,
> - atomic_read(&phys_enc->vblank_refcount));
> + DRM_DEBUG_KMS("id:%u enable=%d/%d\n", DRMID(phys_enc->parent),
> enable,
> + atomic_read(&phys_enc->vblank_refcount));
please use ["%s", enable ? "true" : "false"] to be consistent with
dpu_encoder_phys_cmd.c
Reviewed-by: Rajesh Yadav <ryadav@codeaurora.org>
>
> if (enable && atomic_inc_return(&phys_enc->vblank_refcount) == 1)
> ret = dpu_encoder_helper_register_irq(phys_enc, INTR_IDX_VSYNC);
> @@ -473,12 +469,10 @@ static int
> dpu_encoder_phys_vid_control_vblank_irq(
>
> end:
> if (ret) {
> - DPU_ERROR_VIDENC(vid_enc,
> - "control vblank irq error %d, enable %d\n",
> - ret, enable);
> - DPU_EVT32(DRMID(phys_enc->parent),
> - vid_enc->hw_intf->idx - INTF_0,
> - enable, refcount, DPU_EVTLOG_ERROR);
> + DRM_ERROR("failed: id:%u intf:%d ret:%d enable:%d refcnt:%d\n",
> + DRMID(phys_enc->parent),
> + vid_enc->hw_intf->idx - INTF_0, ret, enable,
> + refcount);
> }
> return ret;
> }
> @@ -697,11 +691,9 @@ static void dpu_encoder_phys_vid_disable(struct
> dpu_encoder_phys *phys_enc)
> ret = _dpu_encoder_phys_vid_wait_for_vblank(phys_enc, false);
> if (ret) {
> atomic_set(&phys_enc->pending_kickoff_cnt, 0);
> - DPU_ERROR_VIDENC(vid_enc,
> - "failure waiting for disable: %d\n",
> - ret);
> - DPU_EVT32(DRMID(phys_enc->parent),
> - vid_enc->hw_intf->idx - INTF_0, ret);
> + DRM_ERROR("wait disable failed: id:%u intf:%d ret:%d\n",
> + DRMID(phys_enc->parent),
> + vid_enc->hw_intf->idx - INTF_0, ret);
> }
> }
>
> @@ -727,8 +719,8 @@ static void
> dpu_encoder_phys_vid_handle_post_kickoff(
> * Video encoders need to turn on their interfaces now
> */
> if (phys_enc->enable_state == DPU_ENC_ENABLING) {
> - DPU_EVT32(DRMID(phys_enc->parent),
> - vid_enc->hw_intf->idx - INTF_0);
> + trace_dpu_enc_phys_vid_post_kickoff(DRMID(phys_enc->parent),
> + vid_enc->hw_intf->idx - INTF_0);
> spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
> vid_enc->hw_intf->ops.enable_timing(vid_enc->hw_intf, 1);
> spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
> @@ -747,8 +739,10 @@ static void
> dpu_encoder_phys_vid_irq_control(struct dpu_encoder_phys *phys_enc,
>
> vid_enc = to_dpu_encoder_phys_vid(phys_enc);
>
> - DPU_EVT32(DRMID(phys_enc->parent), vid_enc->hw_intf->idx - INTF_0,
> - enable, atomic_read(&phys_enc->vblank_refcount));
> + trace_dpu_enc_phys_vid_irq_ctrl(DRMID(phys_enc->parent),
> + vid_enc->hw_intf->idx - INTF_0,
> + enable,
> + atomic_read(&phys_enc->vblank_refcount));
>
> if (enable) {
> ret = dpu_encoder_phys_vid_control_vblank_irq(phys_enc, true);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> index a6313c4343c8..c9041e2a7aa1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> @@ -672,6 +672,41 @@ TRACE_EVENT(dpu_enc_phys_cmd_pdone_timeout,
> __entry->kickoff_count, __entry->event)
> );
>
> +TRACE_EVENT(dpu_enc_phys_vid_post_kickoff,
> + TP_PROTO(uint32_t drm_id, enum dpu_intf intf_idx),
> + TP_ARGS(drm_id, intf_idx),
> + TP_STRUCT__entry(
> + __field( uint32_t, drm_id )
> + __field( enum dpu_intf, intf_idx )
> + ),
> + TP_fast_assign(
> + __entry->drm_id = drm_id;
> + __entry->intf_idx = intf_idx;
> + ),
> + TP_printk("id=%u, intf_idx=%d", __entry->drm_id, __entry->intf_idx)
> +);
> +
> +TRACE_EVENT(dpu_enc_phys_vid_irq_ctrl,
> + TP_PROTO(uint32_t drm_id, enum dpu_intf intf_idx, bool enable,
> + int refcnt),
> + TP_ARGS(drm_id, intf_idx, enable, refcnt),
> + TP_STRUCT__entry(
> + __field( uint32_t, drm_id )
> + __field( enum dpu_intf, intf_idx )
> + __field( bool, enable )
> + __field( int, refcnt )
> + ),
> + TP_fast_assign(
> + __entry->drm_id = drm_id;
> + __entry->intf_idx = intf_idx;
> + __entry->enable = enable;
> + __entry->refcnt = refcnt;
> + ),
> + TP_printk("id=%u, intf_idx=%d enable=%s refcnt=%d", __entry->drm_id,
> + __entry->intf_idx, __entry->enable ? "true" : "false",
> + __entry->drm_id)
> +);
> +
> TRACE_EVENT(dpu_crtc_setup_mixer,
> TP_PROTO(uint32_t crtc_id, uint32_t plane_id,
> struct drm_plane_state *state, struct dpu_plane_state *pstate,
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-06-26 10:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 20:48 [DPU PATCH 00/19] drm/msm: dpu: Clean up dpu_dbg Sean Paul
[not found] ` <20180620204841.56354-1-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-20 20:48 ` [DPU PATCH 01/19] drm/msm: dpu_encoder: Replace DPU_EVT with tracepoints Sean Paul
[not found] ` <20180620204841.56354-2-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 15:57 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 02/19] drm/msm: dpu_crtc: " Sean Paul
[not found] ` <20180620204841.56354-3-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 15:45 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 03/19] drm/msm: dpu_plane: " Sean Paul
[not found] ` <20180620204841.56354-4-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:39 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 04/19] drm/msm: dpu_rm: " Sean Paul
[not found] ` <20180620204841.56354-5-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 10:30 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 05/19] drm/msm: dpu_kms: " Sean Paul
[not found] ` <20180620204841.56354-6-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:42 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 06/19] drm/msm: dpu_encoder_phys_cmd: " Sean Paul
[not found] ` <20180620204841.56354-7-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 10:37 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 07/19] drm/msm: dpu_encoder_phys_vid: " Sean Paul
[not found] ` <20180620204841.56354-8-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 10:47 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ [this message]
2018-06-20 20:48 ` [DPU PATCH 08/19] drm/msm: dpu_vbif: " Sean Paul
[not found] ` <20180620204841.56354-9-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:43 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 09/19] drm/msm: dpu_pingpong: " Sean Paul
[not found] ` <20180620204841.56354-10-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:45 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 10/19] drm/msm: dpu_core_irq: " Sean Paul
[not found] ` <20180620204841.56354-11-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 10:51 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 11/19] drm/msm: dpu_core_perf: " Sean Paul
[not found] ` <20180620204841.56354-12-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:46 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 12/19] drm/msm: dpu_mdss: Replace DPU_EVT with DRM_ERROR Sean Paul
[not found] ` <20180620204841.56354-13-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:47 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 13/19] drm/msm: dpu: Remove dpu evtlog Sean Paul
[not found] ` <20180620204841.56354-14-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-06-26 6:52 ` ryadav-sgV2jX0FEOL9JmXXK+q4OQ
2018-06-20 20:48 ` [DPU PATCH 14/19] drm/msm: dpu_dbg: Remove dump_all option for dumping registers Sean Paul
2018-06-20 20:48 ` [DPU PATCH 15/19] drm/msm: dpu: Remove arbitrary register dumps Sean Paul
2018-06-20 20:48 ` [DPU PATCH 16/19] drm/msm: dpu: Remove panic from dpu debug dump Sean Paul
2018-06-20 20:48 ` [DPU PATCH 17/19] drm/msm: dpu: Remove dsi debug block name Sean Paul
2018-06-20 20:48 ` [DPU PATCH 18/19] drm/msm: dpu_dbg: Remove string parsing from DBG_DUMP Sean Paul
2018-06-20 20:48 ` [DPU PATCH 19/19] drm/msm: dpu: Move dpu_dbg into dpu1 directory Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=582ad563bc619a6c03abf7587428fdae@codeaurora.org \
--to=ryadav-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=hoegsberg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.