From: Chris Zhong <zyw@rock-chips.com>
To: John Keeping <john@metanate.com>, Mark Yao <mark.yao@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 01/26] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI
Date: Sun, 22 Jan 2017 11:58:32 +0800 [thread overview]
Message-ID: <58842DE8.1080604@rock-chips.com> (raw)
In-Reply-To: <20170121163128.22240-2-john@metanate.com>
Hi John
On 01/22/2017 12:31 AM, John Keeping wrote:
> With atomic modesetting the hardware will be powered off when the
> mode_set function is called. We should configure the hardware in the
> commit function (or even the enable function, but switching from commit
> to enable is left for a future patch).
I tend to merge the 2 patches into one.
>
> Signed-off-by: John Keeping <john@metanate.com>
> ---
> v2:
> - also move dw_mipi_dsi_get_lane_bps into the commit function
> ---
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 45 ++++++++++++++--------------------
> 1 file changed, 19 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index d9aa382bb629..8b83ae50c8f3 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -819,34 +819,8 @@ static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> struct drm_display_mode *adjusted_mode)
> {
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> - int ret;
>
> dsi->mode = adjusted_mode;
> -
> - ret = dw_mipi_dsi_get_lane_bps(dsi);
> - if (ret < 0)
> - return;
> -
> - if (clk_prepare_enable(dsi->pclk)) {
> - dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> - return;
> - }
> -
> - dw_mipi_dsi_init(dsi);
> - dw_mipi_dsi_dpi_config(dsi, mode);
> - dw_mipi_dsi_packet_handler_config(dsi);
> - dw_mipi_dsi_video_mode_config(dsi);
> - dw_mipi_dsi_video_packet_config(dsi, mode);
> - dw_mipi_dsi_command_mode_config(dsi);
> - dw_mipi_dsi_line_timer_config(dsi);
> - dw_mipi_dsi_vertical_timing_config(dsi);
> - dw_mipi_dsi_dphy_timing_config(dsi);
> - dw_mipi_dsi_dphy_interface_config(dsi);
> - dw_mipi_dsi_clear_err(dsi);
> - if (drm_panel_prepare(dsi->panel))
> - dev_err(dsi->dev, "failed to prepare panel\n");
> -
> - clk_disable_unprepare(dsi->pclk);
> }
>
> static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> @@ -880,12 +854,31 @@ static void dw_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> u32 val;
> + int ret;
> +
> + ret = dw_mipi_dsi_get_lane_bps(dsi);
> + if (ret < 0)
> + return;
>
> if (clk_prepare_enable(dsi->pclk)) {
> dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> return;
> }
>
> + dw_mipi_dsi_init(dsi);
> + dw_mipi_dsi_dpi_config(dsi, dsi->mode);
> + dw_mipi_dsi_packet_handler_config(dsi);
> + dw_mipi_dsi_video_mode_config(dsi);
> + dw_mipi_dsi_video_packet_config(dsi, dsi->mode);
> + dw_mipi_dsi_command_mode_config(dsi);
> + dw_mipi_dsi_line_timer_config(dsi);
> + dw_mipi_dsi_vertical_timing_config(dsi);
> + dw_mipi_dsi_dphy_timing_config(dsi);
> + dw_mipi_dsi_dphy_interface_config(dsi);
> + dw_mipi_dsi_clear_err(dsi);
> + if (drm_panel_prepare(dsi->panel))
> + dev_err(dsi->dev, "failed to prepare panel\n");
> +
> dw_mipi_dsi_phy_init(dsi);
> dw_mipi_dsi_wait_for_two_frames(dsi);
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: zyw@rock-chips.com (Chris Zhong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/26] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI
Date: Sun, 22 Jan 2017 11:58:32 +0800 [thread overview]
Message-ID: <58842DE8.1080604@rock-chips.com> (raw)
In-Reply-To: <20170121163128.22240-2-john@metanate.com>
Hi John
On 01/22/2017 12:31 AM, John Keeping wrote:
> With atomic modesetting the hardware will be powered off when the
> mode_set function is called. We should configure the hardware in the
> commit function (or even the enable function, but switching from commit
> to enable is left for a future patch).
I tend to merge the 2 patches into one.
>
> Signed-off-by: John Keeping <john@metanate.com>
> ---
> v2:
> - also move dw_mipi_dsi_get_lane_bps into the commit function
> ---
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 45 ++++++++++++++--------------------
> 1 file changed, 19 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index d9aa382bb629..8b83ae50c8f3 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -819,34 +819,8 @@ static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> struct drm_display_mode *adjusted_mode)
> {
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> - int ret;
>
> dsi->mode = adjusted_mode;
> -
> - ret = dw_mipi_dsi_get_lane_bps(dsi);
> - if (ret < 0)
> - return;
> -
> - if (clk_prepare_enable(dsi->pclk)) {
> - dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> - return;
> - }
> -
> - dw_mipi_dsi_init(dsi);
> - dw_mipi_dsi_dpi_config(dsi, mode);
> - dw_mipi_dsi_packet_handler_config(dsi);
> - dw_mipi_dsi_video_mode_config(dsi);
> - dw_mipi_dsi_video_packet_config(dsi, mode);
> - dw_mipi_dsi_command_mode_config(dsi);
> - dw_mipi_dsi_line_timer_config(dsi);
> - dw_mipi_dsi_vertical_timing_config(dsi);
> - dw_mipi_dsi_dphy_timing_config(dsi);
> - dw_mipi_dsi_dphy_interface_config(dsi);
> - dw_mipi_dsi_clear_err(dsi);
> - if (drm_panel_prepare(dsi->panel))
> - dev_err(dsi->dev, "failed to prepare panel\n");
> -
> - clk_disable_unprepare(dsi->pclk);
> }
>
> static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> @@ -880,12 +854,31 @@ static void dw_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> u32 val;
> + int ret;
> +
> + ret = dw_mipi_dsi_get_lane_bps(dsi);
> + if (ret < 0)
> + return;
>
> if (clk_prepare_enable(dsi->pclk)) {
> dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> return;
> }
>
> + dw_mipi_dsi_init(dsi);
> + dw_mipi_dsi_dpi_config(dsi, dsi->mode);
> + dw_mipi_dsi_packet_handler_config(dsi);
> + dw_mipi_dsi_video_mode_config(dsi);
> + dw_mipi_dsi_video_packet_config(dsi, dsi->mode);
> + dw_mipi_dsi_command_mode_config(dsi);
> + dw_mipi_dsi_line_timer_config(dsi);
> + dw_mipi_dsi_vertical_timing_config(dsi);
> + dw_mipi_dsi_dphy_timing_config(dsi);
> + dw_mipi_dsi_dphy_interface_config(dsi);
> + dw_mipi_dsi_clear_err(dsi);
> + if (drm_panel_prepare(dsi->panel))
> + dev_err(dsi->dev, "failed to prepare panel\n");
> +
> dw_mipi_dsi_phy_init(dsi);
> dw_mipi_dsi_wait_for_two_frames(dsi);
>
WARNING: multiple messages have this Message-ID (diff)
From: Chris Zhong <zyw@rock-chips.com>
To: John Keeping <john@metanate.com>, Mark Yao <mark.yao@rock-chips.com>
Cc: dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 01/26] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI
Date: Sun, 22 Jan 2017 11:58:32 +0800 [thread overview]
Message-ID: <58842DE8.1080604@rock-chips.com> (raw)
In-Reply-To: <20170121163128.22240-2-john@metanate.com>
Hi John
On 01/22/2017 12:31 AM, John Keeping wrote:
> With atomic modesetting the hardware will be powered off when the
> mode_set function is called. We should configure the hardware in the
> commit function (or even the enable function, but switching from commit
> to enable is left for a future patch).
I tend to merge the 2 patches into one.
>
> Signed-off-by: John Keeping <john@metanate.com>
> ---
> v2:
> - also move dw_mipi_dsi_get_lane_bps into the commit function
> ---
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 45 ++++++++++++++--------------------
> 1 file changed, 19 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index d9aa382bb629..8b83ae50c8f3 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -819,34 +819,8 @@ static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> struct drm_display_mode *adjusted_mode)
> {
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> - int ret;
>
> dsi->mode = adjusted_mode;
> -
> - ret = dw_mipi_dsi_get_lane_bps(dsi);
> - if (ret < 0)
> - return;
> -
> - if (clk_prepare_enable(dsi->pclk)) {
> - dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> - return;
> - }
> -
> - dw_mipi_dsi_init(dsi);
> - dw_mipi_dsi_dpi_config(dsi, mode);
> - dw_mipi_dsi_packet_handler_config(dsi);
> - dw_mipi_dsi_video_mode_config(dsi);
> - dw_mipi_dsi_video_packet_config(dsi, mode);
> - dw_mipi_dsi_command_mode_config(dsi);
> - dw_mipi_dsi_line_timer_config(dsi);
> - dw_mipi_dsi_vertical_timing_config(dsi);
> - dw_mipi_dsi_dphy_timing_config(dsi);
> - dw_mipi_dsi_dphy_interface_config(dsi);
> - dw_mipi_dsi_clear_err(dsi);
> - if (drm_panel_prepare(dsi->panel))
> - dev_err(dsi->dev, "failed to prepare panel\n");
> -
> - clk_disable_unprepare(dsi->pclk);
> }
>
> static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> @@ -880,12 +854,31 @@ static void dw_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
> struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> u32 val;
> + int ret;
> +
> + ret = dw_mipi_dsi_get_lane_bps(dsi);
> + if (ret < 0)
> + return;
>
> if (clk_prepare_enable(dsi->pclk)) {
> dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> return;
> }
>
> + dw_mipi_dsi_init(dsi);
> + dw_mipi_dsi_dpi_config(dsi, dsi->mode);
> + dw_mipi_dsi_packet_handler_config(dsi);
> + dw_mipi_dsi_video_mode_config(dsi);
> + dw_mipi_dsi_video_packet_config(dsi, dsi->mode);
> + dw_mipi_dsi_command_mode_config(dsi);
> + dw_mipi_dsi_line_timer_config(dsi);
> + dw_mipi_dsi_vertical_timing_config(dsi);
> + dw_mipi_dsi_dphy_timing_config(dsi);
> + dw_mipi_dsi_dphy_interface_config(dsi);
> + dw_mipi_dsi_clear_err(dsi);
> + if (drm_panel_prepare(dsi->panel))
> + dev_err(dsi->dev, "failed to prepare panel\n");
> +
> dw_mipi_dsi_phy_init(dsi);
> dw_mipi_dsi_wait_for_two_frames(dsi);
>
next prev parent reply other threads:[~2017-01-22 3:58 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-21 16:31 [PATCH v2 00/26] drm/rockchip: MIPI fixes & improvements John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` [PATCH v2 01/26] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 3:58 ` Chris Zhong [this message]
2017-01-22 3:58 ` Chris Zhong
2017-01-22 3:58 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 02/26] drm/rockchip: dw-mipi-dsi: rename commit hook to enable John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` [PATCH v2 03/26] drm/rockchip: dw-mipi-dsi: pass mode in where needed John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 4:00 ` Chris Zhong
2017-01-22 4:00 ` Chris Zhong
2017-01-22 4:00 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 04/26] drm/rockchip: dw-mipi-dsi: remove mode_set hook John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 6:08 ` Chris Zhong
2017-01-22 6:08 ` Chris Zhong
2017-01-22 6:08 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 05/26] drm/rockchip: dw-mipi-dsi: fix command header writes John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` [PATCH v2 06/26] drm/rockchip: dw-mipi-dsi: fix generic packet status check John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 6:24 ` Chris Zhong
2017-01-22 6:24 ` Chris Zhong
2017-01-22 6:24 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 07/26] drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 6:42 ` Chris Zhong
2017-01-22 6:42 ` Chris Zhong
2017-01-22 6:42 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 08/26] drm/rockchip: dw-mipi-dsi: include bad value in error message John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 6:44 ` Chris Zhong
2017-01-22 6:44 ` Chris Zhong
2017-01-22 6:44 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 09/26] drm/rockchip: dw-mipi-dsi: respect message flags John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 7:14 ` Chris Zhong
2017-01-22 7:14 ` Chris Zhong
2017-01-22 7:14 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 10/26] drm/rockchip: dw-mipi-dsi: only request HS clock when required John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 8:10 ` Chris Zhong
2017-01-22 8:10 ` Chris Zhong
2017-01-22 8:10 ` Chris Zhong
[not found] ` <20170121163128.22240-1-john-HooS5bfzL4hWk0Htik3J/w@public.gmane.org>
2017-01-21 16:31 ` [PATCH v2 11/26] drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 8:16 ` Chris Zhong
2017-01-22 8:16 ` Chris Zhong
2017-01-22 8:16 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 8:22 ` Chris Zhong
2017-01-22 8:22 ` Chris Zhong
2017-01-22 8:22 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 13/26] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 8:37 ` Chris Zhong
2017-01-22 8:37 ` Chris Zhong
2017-01-22 8:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 14/26] drm/rockchip: dw-mipi-dsi: fix escape clock rate John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 9:37 ` Chris Zhong
2017-01-22 9:37 ` Chris Zhong
2017-01-22 9:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 9:37 ` Chris Zhong
2017-01-22 9:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 16/26] drm/rockchip: dw-mipi-dsi: configure bias and bandgap before enable John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` [PATCH v2 17/26] drm/rockchip: dw-mipi-dsi: don't enable PHY PLL until it's configured John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 10:07 ` Chris Zhong
2017-01-22 10:07 ` Chris Zhong
2017-01-22 10:07 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 18/26] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 3:06 ` Chris Zhong
2017-01-22 3:06 ` Chris Zhong
2017-01-22 3:06 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 19/26] drm/rockchip: dw-mipi-dsi: improve PLL configuration John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-23 1:38 ` Chris Zhong
2017-01-23 1:38 ` Chris Zhong
2017-01-23 1:38 ` Chris Zhong
2017-01-23 12:49 ` John Keeping
2017-01-23 12:49 ` John Keeping
2017-01-23 12:49 ` John Keeping
2017-01-24 2:42 ` Chris Zhong
2017-01-24 2:42 ` Chris Zhong
2017-01-24 2:42 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 20/26] drm/rockchip: dw-mipi-dsi: use specific poll helper John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-23 0:49 ` Chris Zhong
2017-01-23 0:49 ` Chris Zhong
2017-01-23 0:49 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 21/26] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC John Keeping
2017-01-21 16:31 ` [PATCH v2 21/26] drm/rockchip: dw-mipi-dsi: use positive check for N{H,V}SYNC John Keeping
2017-01-21 16:31 ` [PATCH v2 21/26] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC John Keeping
2017-01-21 16:31 ` [PATCH v2 22/26] drm/rockchip: vop: test for P{H,V}SYNC John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-23 7:12 ` Mark yao
2017-01-23 7:12 ` Mark yao
2017-01-21 16:31 ` [PATCH v2 23/26] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` [PATCH v2 24/26] drm/rockchip: dw-mipi-dsi: support non-burst modes John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-23 6:11 ` Chris Zhong
2017-01-23 6:11 ` Chris Zhong
2017-01-23 6:11 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 25/26] drm/rockchip: dw-mipi-dsi: add reset control John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-23 6:12 ` Chris Zhong
2017-01-23 6:12 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 26/26] drm/rockchip: dw-mipi-dsi: support read commands John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-21 16:31 ` John Keeping
2017-01-22 3:08 ` Chris Zhong
2017-01-22 3:08 ` Chris Zhong
2017-01-22 3:08 ` Chris Zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58842DE8.1080604@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=john@metanate.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.yao@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.