From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: Alexander Stein <alexander.stein@systec-electronic.com>,
Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, "Wang,
Yu" <yu.y.wang@intel.com>,
"Li, Guanglei" <guangleix.li@intel.com>,
"Wu, Hao" <hao.wu@intel.com>
Subject: Re: [PATCH v2 1/1] xhci: add USB2 test mode support
Date: Wed, 8 Feb 2017 16:17:45 +0200 [thread overview]
Message-ID: <589B2889.3050708@linux.intel.com> (raw)
In-Reply-To: <20170208134444.18369-1-alexander.stein@systec-electronic.com>
On 08.02.2017 15:44, Alexander Stein wrote:
> This patch adds support for USB2 test mode (Test_J, Test_K,
> Test_SE0_NAK and Test_Packet) per XHCI spec 4.19.6.
>
> USB2 test mode is a required hardware feature for system integrators
> validating their hardware according to USB spec, regarding signal
> strength and stuff. It is purely a hardware test feature.
>
> Usually you need an oscilloscope and have to enable those test modes on
> the hardware. This will send some specific test patterns on D+/D-. There
> is no report available (in Linux itself) as it is purely externally
> visible. Regular USB usage is not possible at that time.
> Anyone (well access to e.g. /dev/bus/usb/001/001 provided) can use it by
> sending appropriate USB_PORT_FEAT_TEST requests to the hub.
> The same feature for ehci based hosts is already available at
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/host/ehci-hub.c#n1267
>
> Signed-off-by: "Wang, Yu" <yu.y.wang@intel.com>
> Signed-off-by: "Li, Guanglei" <guangleix.li@intel.com>
> Signed-off-by: "Wu, Hao" <hao.wu@intel.com>
> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
> ---
I think there's a reworked series of this feature already posted at:
http://marc.info/?l=linux-usb&m=148050258916147&w=2
But this change log is now better
I was thinking about adding that to 4.12
-Mathias
next prev parent reply other threads:[~2017-02-08 14:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 13:44 [PATCH v2 1/1] xhci: add USB2 test mode support Alexander Stein
2017-02-08 13:51 ` Greg Kroah-Hartman
2017-02-08 14:17 ` Mathias Nyman [this message]
2017-02-08 15:10 ` Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=589B2889.3050708@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=alexander.stein@systec-electronic.com \
--cc=gregkh@linuxfoundation.org \
--cc=guangleix.li@intel.com \
--cc=hao.wu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=yu.y.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.