From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Mon, 13 Feb 2017 08:57:17 +0100 Subject: [U-Boot] [PATCH 2/2] i2c: sandbox: remove code snippet from Kconfig help In-Reply-To: <1486784395-19609-3-git-send-email-yamada.masahiro@socionext.com> References: <1486784395-19609-1-git-send-email-yamada.masahiro@socionext.com> <1486784395-19609-3-git-send-email-yamada.masahiro@socionext.com> Message-ID: <58A166DD.2030702@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Masahiro, Am 11.02.2017 um 04:39 schrieb Masahiro Yamada: > With the Kconfig re-sync with Linux 4.10, characters such as > '}', ';' in Kconfig help message cause warnings: > > $ make defconfig > *** Default configuration is based on 'sandbox_defconfig' > drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' > drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' > > Drop the Device Tree fragment from the help. > > Signed-off-by: Masahiro Yamada > --- > > drivers/i2c/Kconfig | 23 +---------------------- > 1 file changed, 1 insertion(+), 22 deletions(-) Thanks! Acked-by: Heiko Schocher bye, Heiko > > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig > index 71cc173..39f62da 100644 > --- a/drivers/i2c/Kconfig > +++ b/drivers/i2c/Kconfig > @@ -132,28 +132,7 @@ config SYS_I2C_SANDBOX > help > Enable I2C support for sandbox. This is an emulation of a real I2C > bus. Devices can be attached to the bus using the device tree > - which specifies the driver to use. As an example, see this device > - tree fragment from sandbox.dts. It shows that the I2C bus has a > - single EEPROM at address 0x2c (7-bit address) which is emulated by > - the driver for "sandbox,i2c-eeprom", which is in > - drivers/misc/i2c_eeprom_emul.c. > - > - i2c at 0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > - compatible = "sandbox,i2c"; > - clock-frequency = <400000>; > - eeprom at 2c { > - reg = <0x2c>; > - compatible = "i2c-eeprom"; > - emul { > - compatible = "sandbox,i2c-eeprom"; > - sandbox,filename = "i2c.bin"; > - sandbox,size = <128>; > - }; > - }; > - }; > + which specifies the driver to use. See sandbox.dts as an example. > > config SYS_I2C_S3C24X0 > bool "Samsung I2C driver" > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany