All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] net: macb: Fix ETH not found when clock not support
Date: Tue, 14 Feb 2017 08:58:10 +0100	[thread overview]
Message-ID: <58A2B892.8030605@denx.de> (raw)
In-Reply-To: <20170214070404.14240-1-wenyou.yang@atmel.com>

Hello Wenyou,

Am 14.02.2017 um 08:04 schrieb Wenyou Yang:
> For the boards such as smartweb on which the clock driver isn't
> supported, the ethernet fail to be found when booting up with
> the below log.
> ---8<---
> Net:   No ethernet found.
> --->8---
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
>
>   drivers/net/macb.c | 13 +++++++++----
>   1 file changed, 9 insertions(+), 4 deletions(-)

Thanks!

$ git am -3 mbox
Wende an: net: macb: Fix ETH not found when clock not support
Verwende Informationen aus der Staging-Area, um ein Basisverzeichnis nachzustellen ...
M       drivers/net/macb.c
Falle zur?ck zum Patchen der Basis und zum 3-Wege-Merge ...
automatischer Merge von drivers/net/macb.c
pollux:u-boot-smartweb hs [master] $

Is your patch based on current mainline?

Beside of this, it fixed the problem on the smartweb and corvus
board, thanks!

So, please add my:

Tested-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 67d820fefa..d29e9b2bdd 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -113,7 +113,9 @@ struct macb_device {
>   	struct mii_dev		*bus;
>
>   #ifdef CONFIG_DM_ETH
> +#ifdef CONFIG_CLK
>   	unsigned long		pclk_rate;
> +#endif
>   	phy_interface_t		phy_interface;
>   #endif
>   };
> @@ -756,7 +758,7 @@ static int _macb_write_hwaddr(struct macb_device *macb, unsigned char *enetaddr)
>   static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
>   {
>   	u32 config;
> -#ifdef CONFIG_DM_ETH
> +#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
>   	unsigned long macb_hz = macb->pclk_rate;
>   #else
>   	unsigned long macb_hz = get_macb_pclk_rate(id);
> @@ -778,7 +780,7 @@ static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
>   {
>   	u32 config;
>
> -#ifdef CONFIG_DM_ETH
> +#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
>   	unsigned long macb_hz = macb->pclk_rate;
>   #else
>   	unsigned long macb_hz = get_macb_pclk_rate(id);
> @@ -1002,6 +1004,7 @@ static const struct eth_ops macb_eth_ops = {
>   	.write_hwaddr	= macb_write_hwaddr,
>   };
>
> +#ifdef CONFIG_CLK
>   static int macb_enable_clk(struct udevice *dev)
>   {
>   	struct macb_device *macb = dev_get_priv(dev);
> @@ -1025,13 +1028,13 @@ static int macb_enable_clk(struct udevice *dev)
>
>   	return 0;
>   }
> +#endif
>
>   static int macb_eth_probe(struct udevice *dev)
>   {
>   	struct eth_pdata *pdata = dev_get_platdata(dev);
>   	struct macb_device *macb = dev_get_priv(dev);
>   	const char *phy_mode;
> -	int ret;
>
>   	phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
>   	if (phy_mode)
> @@ -1043,9 +1046,11 @@ static int macb_eth_probe(struct udevice *dev)
>
>   	macb->regs = (void *)pdata->iobase;
>
> -	ret = macb_enable_clk(dev);
> +#ifdef CONFIG_CLK
> +	int ret = macb_enable_clk(dev);
>   	if (ret)
>   		return ret;
> +#endif
>
>   	_macb_eth_initialize(macb);
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

      reply	other threads:[~2017-02-14  7:58 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-14  7:04 [U-Boot] [PATCH] net: macb: Fix ETH not found when clock not support Wenyou Yang
2017-02-14  7:58 ` Heiko Schocher [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58A2B892.8030605@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.