From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Daniel Egger <de@axiros.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: Booting from SATA disables IDE?
Date: Sun, 3 Apr 2005 11:57:43 +0200 [thread overview]
Message-ID: <58cb370e0504030157414470af@mail.gmail.com> (raw)
In-Reply-To: <1921eeb1e202db77fdccb439f85ac532@axiros.com>
Hi,
On Apr 1, 2005 3:42 PM, Daniel Egger <de@axiros.com> wrote:
> libata version 1.10 loaded.
> sata_via version 1.0
> ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
> sata_via(0000:00:0f.0): routed to hard irq line 11
> ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
> ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063
> 88:407f
> ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
> ata1: dev 0 configured for UDMA/133
> scsi0 : sata_via
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_via
> elevator: using anticipatory as default io scheduler
> Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
> SCSI device sda: drive cache: write back
> /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Can we see also messages for non working case
and IDE messages for both cases?
Bartlomiej
next prev parent reply other threads:[~2005-04-03 9:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-01 13:42 Booting from SATA disables IDE? Daniel Egger
2005-04-01 17:04 ` Jeff Garzik
2005-04-01 20:35 ` Daniel Egger
2005-04-02 16:36 ` Daniel Egger
2005-04-03 8:42 ` Booting from SATA disables IDE? (reproduced) Daniel Egger
2005-04-03 9:57 ` Bartlomiej Zolnierkiewicz [this message]
2005-04-03 11:20 ` Booting from SATA disables IDE? Daniel Egger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58cb370e0504030157414470af@mail.gmail.com \
--to=bzolnier@gmail.com \
--cc=de@axiros.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.