All of lore.kernel.org
 help / color / mirror / Atom feed
From: hkallweit1@gmail.com (Heiner Kallweit)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v4 8/10] mmc: meson-gx: improve initial configuration
Date: Fri, 3 Mar 2017 20:58:18 +0100	[thread overview]
Message-ID: <58eac416-40da-8a20-e54a-0e6be3b7ba33@gmail.com> (raw)
In-Reply-To: <62912f3d-2307-cfff-3c69-c8b8ffaeb474@gmail.com>

Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.

In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- rebased
v4:
- no changes
---
 drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 684cc088..e904b0a5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -394,15 +394,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
 	val |= bus_width << CFG_BUS_WIDTH_SHIFT;
 
-	val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
-	val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
-	val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
 	val &= ~CFG_DDR;
 	if (ios->timing == MMC_TIMING_UHS_DDR50 ||
 	    ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -413,11 +404,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS400)
 		val |= CFG_CHK_DS;
 
-	writel(val, host->regs + SD_EMMC_CFG);
-
-	if (val != orig)
+	if (val != orig) {
+		writel(val, host->regs + SD_EMMC_CFG);
 		dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
 			__func__, orig, val);
+	}
 }
 
 static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -695,6 +686,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
 	return status;
 }
 
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+	u32 cfg = 0;
+
+	cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+	cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+	cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+	writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
 static const struct mmc_host_ops meson_mmc_ops = {
 	.request	= meson_mmc_request,
 	.set_ios	= meson_mmc_set_ios,
@@ -755,10 +757,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_host;
 
-	ret = meson_mmc_clk_init(host);
-	if (ret)
-		goto free_host;
-
 	/* Stop execution */
 	writel(0, host->regs + SD_EMMC_START);
 
@@ -767,6 +765,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
 	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
 
+	/* set config to sane default */
+	meson_mmc_cfg_init(host);
+
+	ret = meson_mmc_clk_init(host);
+	if (ret)
+		goto free_host;
+
 	ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
 					meson_mmc_irq_thread, IRQF_SHARED,
 					DRIVER_NAME, host);
-- 
2.11.1

WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	linux-amlogic@lists.infradead.org
Subject: [PATCH v4 8/10] mmc: meson-gx: improve initial configuration
Date: Fri, 3 Mar 2017 20:58:18 +0100	[thread overview]
Message-ID: <58eac416-40da-8a20-e54a-0e6be3b7ba33@gmail.com> (raw)
In-Reply-To: <62912f3d-2307-cfff-3c69-c8b8ffaeb474@gmail.com>

Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.

In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- rebased
v4:
- no changes
---
 drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 684cc088..e904b0a5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -394,15 +394,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
 	val |= bus_width << CFG_BUS_WIDTH_SHIFT;
 
-	val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
-	val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
-	val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
-	val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
 	val &= ~CFG_DDR;
 	if (ios->timing == MMC_TIMING_UHS_DDR50 ||
 	    ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -413,11 +404,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS400)
 		val |= CFG_CHK_DS;
 
-	writel(val, host->regs + SD_EMMC_CFG);
-
-	if (val != orig)
+	if (val != orig) {
+		writel(val, host->regs + SD_EMMC_CFG);
 		dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
 			__func__, orig, val);
+	}
 }
 
 static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -695,6 +686,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
 	return status;
 }
 
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+	u32 cfg = 0;
+
+	cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+	cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+	cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+	writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
 static const struct mmc_host_ops meson_mmc_ops = {
 	.request	= meson_mmc_request,
 	.set_ios	= meson_mmc_set_ios,
@@ -755,10 +757,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_host;
 
-	ret = meson_mmc_clk_init(host);
-	if (ret)
-		goto free_host;
-
 	/* Stop execution */
 	writel(0, host->regs + SD_EMMC_START);
 
@@ -767,6 +765,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
 	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
 
+	/* set config to sane default */
+	meson_mmc_cfg_init(host);
+
+	ret = meson_mmc_clk_init(host);
+	if (ret)
+		goto free_host;
+
 	ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
 					meson_mmc_irq_thread, IRQF_SHARED,
 					DRIVER_NAME, host);
-- 
2.11.1


  parent reply	other threads:[~2017-03-03 19:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-03 19:49 [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements Heiner Kallweit
2017-03-03 19:49 ` Heiner Kallweit
2017-03-03 19:51 ` [PATCH v4 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-03-03 19:51   ` Heiner Kallweit
2017-03-03 19:52 ` [PATCH v4 2/10] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-03-03 19:52   ` Heiner Kallweit
2017-03-03 19:53 ` [PATCH v4 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-03-03 19:53   ` Heiner Kallweit
2017-03-03 19:54 ` [PATCH v4 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-03-03 19:54   ` Heiner Kallweit
2017-03-03 19:55 ` [PATCH v4 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-03-03 19:55   ` Heiner Kallweit
2017-03-03 19:56 ` [PATCH v4 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe Heiner Kallweit
2017-03-03 19:56   ` Heiner Kallweit
2017-03-03 19:57 ` [PATCH v4 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init Heiner Kallweit
2017-03-03 19:57   ` Heiner Kallweit
2017-03-03 19:58 ` Heiner Kallweit [this message]
2017-03-03 19:58   ` [PATCH v4 8/10] mmc: meson-gx: improve initial configuration Heiner Kallweit
2017-03-03 19:59 ` [PATCH v4 9/10] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-03-03 19:59   ` Heiner Kallweit
2017-03-03 20:00 ` [PATCH v4 10/10] mmc: meson-gx: replace magic timeout numbers with constants Heiner Kallweit
2017-03-03 20:00   ` Heiner Kallweit
2017-03-03 21:19 ` [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements Kevin Hilman
2017-03-03 21:19   ` Kevin Hilman
2017-03-03 22:54   ` Heiner Kallweit
2017-03-03 22:54     ` Heiner Kallweit
2017-03-04  5:33     ` Kevin Hilman
2017-03-04  5:33       ` Kevin Hilman
2017-03-04  5:36       ` Kevin Hilman
2017-03-04  5:36         ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58eac416-40da-8a20-e54a-0e6be3b7ba33@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.