From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/8] drivers: i2c: davinci_i2c: Update davinci i2c driver to driver model
Date: Fri, 28 Apr 2017 05:55:38 +0200 [thread overview]
Message-ID: <5902BD3A.3080403@denx.de> (raw)
In-Reply-To: <20170420152549.28031-3-fcooper@ti.com>
Hello Franklin,
Am 20.04.2017 um 17:25 schrieb Franklin S Cooper Jr:
> Convert davinci i2c driver to driver model.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> drivers/i2c/davinci_i2c.c | 92 +++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 90 insertions(+), 2 deletions(-)
Reviewed-by: Heiko Schocher <hs@denx.de>
Applied to u-boot-i2c/next
bye,
Heiko
>
> diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c
> index a6bce26..4471193 100644
> --- a/drivers/i2c/davinci_i2c.c
> +++ b/drivers/i2c/davinci_i2c.c
> @@ -14,11 +14,21 @@
>
> #include <common.h>
> #include <i2c.h>
> +#include <dm.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/i2c_defs.h>
> #include <asm/io.h>
> #include "davinci_i2c.h"
>
> +#ifdef CONFIG_DM_I2C
> +/* Information about i2c controller */
> +struct i2c_bus {
> + int id;
> + uint speed;
> + struct i2c_regs *regs;
> +};
> +#endif
> +
> #define CHECK_NACK() \
> do {\
> if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
> @@ -27,8 +37,6 @@
> } \
> } while (0)
>
> -static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap);
> -
> static int _wait_for_bus(struct i2c_regs *i2c_base)
> {
> int stat, timeout;
> @@ -331,6 +339,7 @@ static int _davinci_i2c_probe_chip(struct i2c_regs *i2c_base, uint8_t chip)
> return rc;
> }
>
> +#ifndef CONFIG_DM_I2C
> static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap)
> {
> switch (adap->hwadapnr) {
> @@ -420,3 +429,82 @@ U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe_chip,
> CONFIG_SYS_DAVINCI_I2C_SLAVE2,
> 2)
> #endif
> +
> +#else /* CONFIG_DM_I2C */
> +
> +static int davinci_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
> + int nmsgs)
> +{
> + struct i2c_bus *i2c_bus = dev_get_priv(bus);
> + int ret;
> +
> + debug("i2c_xfer: %d messages\n", nmsgs);
> + for (; nmsgs > 0; nmsgs--, msg++) {
> + debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
> + if (msg->flags & I2C_M_RD) {
> + ret = _davinci_i2c_read(i2c_bus->regs, msg->addr,
> + 0, 0, msg->buf, msg->len);
> + } else {
> + ret = _davinci_i2c_write(i2c_bus->regs, msg->addr,
> + 0, 0, msg->buf, msg->len);
> + }
> + if (ret) {
> + debug("i2c_write: error sending\n");
> + return -EREMOTEIO;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static int davinci_i2c_set_speed(struct udevice *dev, uint speed)
> +{
> + struct i2c_bus *i2c_bus = dev_get_priv(dev);
> +
> + i2c_bus->speed = speed;
> + return _davinci_i2c_setspeed(i2c_bus->regs, speed);
> +}
> +
> +static int davinci_i2c_probe(struct udevice *dev)
> +{
> + struct i2c_bus *i2c_bus = dev_get_priv(dev);
> +
> + i2c_bus->id = dev->seq;
> + i2c_bus->regs = (struct i2c_regs *)dev_get_addr(dev);
> +
> + i2c_bus->speed = 100000;
> + _davinci_i2c_init(i2c_bus->regs, i2c_bus->speed, 0);
> +
> + return 0;
> +}
> +
> +static int davinci_i2c_probe_chip(struct udevice *bus, uint chip_addr,
> + uint chip_flags)
> +{
> + struct i2c_bus *i2c_bus = dev_get_priv(bus);
> +
> + return _davinci_i2c_probe_chip(i2c_bus->regs, chip_addr);
> +}
> +
> +static const struct dm_i2c_ops davinci_i2c_ops = {
> + .xfer = davinci_i2c_xfer,
> + .probe_chip = davinci_i2c_probe_chip,
> + .set_bus_speed = davinci_i2c_set_speed,
> +};
> +
> +static const struct udevice_id davinci_i2c_ids[] = {
> + { .compatible = "ti,davinci-i2c"},
> + { .compatible = "ti,keystone-i2c"},
> + { }
> +};
> +
> +U_BOOT_DRIVER(i2c_davinci) = {
> + .name = "i2c_davinci",
> + .id = UCLASS_I2C,
> + .of_match = davinci_i2c_ids,
> + .probe = davinci_i2c_probe,
> + .priv_auto_alloc_size = sizeof(struct i2c_bus),
> + .ops = &davinci_i2c_ops,
> +};
> +
> +#endif /* CONFIG_DM_I2C */
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2017-04-28 3:55 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 15:25 [U-Boot] [PATCH v2 0/8] drivers: i2c: davinci_i2c: Convert driver to DM Franklin S Cooper Jr
2017-04-20 15:25 ` [U-Boot] [PATCH v2 1/8] i2c: davinci: Split functions into two parts for future DM support Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 3:54 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 2/8] drivers: i2c: davinci_i2c: Update davinci i2c driver to driver model Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 3:55 ` Heiko Schocher [this message]
2017-04-20 15:25 ` [U-Boot] [PATCH v2 3/8] ti: common: board_detect: Introduce function to set the address length Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 3:58 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 4/8] ti: common: board_detect: Set alen to expected value before i2c read Franklin S Cooper Jr
2017-04-28 4:00 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 5/8] ARM: dts: k2g: Add I2C nodes to 66AK2Gx Franklin S Cooper Jr
2017-04-28 4:01 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 6/8] ARM: dts: keystone2: add I2C aliases for davinci I2C nodes Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 4:03 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 7/8] ARM: dts: keystone-k2g-evm: Enable I2C0 and I2C1 Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 4:05 ` Heiko Schocher
2017-04-20 15:25 ` [U-Boot] [PATCH v2 8/8] ARM: keystone: Enable DM_I2C by default Franklin S Cooper Jr
2017-04-26 19:16 ` Tom Rini
2017-04-28 4:07 ` Heiko Schocher
2017-04-21 4:08 ` [U-Boot] [PATCH v2 0/8] drivers: i2c: davinci_i2c: Convert driver to DM Vignesh R
2017-04-21 9:13 ` Vignesh R
2017-06-08 5:13 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5902BD3A.3080403@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.