From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001995]: Master and PCM control missing
Date: Fri, 7 Apr 2006 19:47:11 +0200 [thread overview]
Message-ID: <591bd306d325eea54cd5b64d7c7405ad@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1995>
======================================================================
Reported By: baja
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1995
Category: CORE - control
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution:
Kernel Version:
======================================================================
Date Submitted: 04-03-2006 06:13 CEST
Last Modified: 04-07-2006 19:47 CEST
======================================================================
Summary: Master and PCM control missing
Description:
1.0.11rc3 had the PCM control but the Master control was missing. rc4 now
has both the PCM and the Master volume control missing.
Drivers loaded:
$ lsmod | grep snd
snd_seq_dummy 3396 0
snd_seq_oss 34240 0
snd_seq_midi_event 7232 1 snd_seq_oss
snd_seq 54528 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 7952 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 42016 0
snd_mixer_oss 16320 1 snd_pcm_oss
snd_hda_intel 16028 1
snd_hda_codec 166536 1 snd_hda_intel
snd_pcm 88396 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 22600 2 snd_seq,snd_pcm
snd 59072 12
snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 9360 2 snd_hda_intel,snd_pcm
Controls reported by alsa
$ amixer controls
numid=11,iface=MIXER,name='Headphone Playback Switch'
numid=4,iface=MIXER,name='Surround Playback Switch'
numid=3,iface=MIXER,name='Surround Playback Volume'
numid=7,iface=MIXER,name='Center Playback Switch'
numid=5,iface=MIXER,name='Center Playback Volume'
numid=8,iface=MIXER,name='LFE Playback Switch'
numid=6,iface=MIXER,name='LFE Playback Volume'
numid=17,iface=MIXER,name='Line Playback Switch'
numid=16,iface=MIXER,name='Line Playback Volume'
numid=19,iface=MIXER,name='CD Playback Switch'
numid=18,iface=MIXER,name='CD Playback Volume'
numid=13,iface=MIXER,name='Mic Playback Switch'
numid=12,iface=MIXER,name='Mic Playback Volume'
numid=21,iface=MIXER,name='Capture Switch'
numid=23,iface=MIXER,name='Capture Switch',index=1
numid=25,iface=MIXER,name='Capture Switch',index=2
numid=20,iface=MIXER,name='Capture Volume'
numid=22,iface=MIXER,name='Capture Volume',index=1
numid=24,iface=MIXER,name='Capture Volume',index=2
numid=29,iface=MIXER,name='IEC958 Playback Con Mask'
numid=30,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=31,iface=MIXER,name='IEC958 Playback Default'
numid=32,iface=MIXER,name='IEC958 Playback Switch'
numid=34,iface=MIXER,name='IEC958 Capture Default'
numid=33,iface=MIXER,name='IEC958 Capture Switch'
numid=15,iface=MIXER,name='Front Mic Playback Switch'
numid=14,iface=MIXER,name='Front Mic Playback Volume'
numid=2,iface=MIXER,name='Front Playback Switch'
numid=1,iface=MIXER,name='Front Playback Volume'
numid=26,iface=MIXER,name='Input Source'
numid=27,iface=MIXER,name='Input Source',index=1
numid=28,iface=MIXER,name='Input Source',index=2
numid=10,iface=MIXER,name='Side Playback Switch'
numid=9,iface=MIXER,name='Side Playback Volume'
Assuming that that this is an issue since applications look for this
"generic" volume controls.
Thanks
Baja
======================================================================
----------------------------------------------------------------------
baja - 04-03-06 06:17
----------------------------------------------------------------------
By the way... I am using a MSi mother board:
MSI K8NGM2-FID Socket 939 NVIDIA GeForce 6150
ls pci reports:
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev
a2)
with snd_hda_intel...
----------------------------------------------------------------------
tiwai - 04-07-06 19:47
----------------------------------------------------------------------
The most important information is missing: Please upload
/proc/asound/card0/codec#* files.
Possibly there is no master volume or PCM control on your chip indeed, but
only volume for each output jack, Front, Surround, CLFE.
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 06:13 baja New Issue
04-03-06 06:17 baja Note Added: 0009084
04-07-06 19:47 tiwai Note Added: 0009154
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-04-07 17:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-07 17:47 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-05 11:18 [ALSA - driver 0001995]: Master and PCM control missing bugtrack
2006-04-03 4:17 bugtrack
2006-04-03 4:13 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=591bd306d325eea54cd5b64d7c7405ad@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.