From: Detlev Casanova <detlev.casanova@gmail.com>
To: Dan Williams <dcbw@redhat.com>
Cc: linux-wireless@vger.kernel.org,
Johannes Berg <johannes.berg@intel.com>,
laurent.pinchart@ideasonboard.com
Subject: Re: NetworkManager not listing access points
Date: Thu, 19 Sep 2013 07:58:14 +0200 [thread overview]
Message-ID: <5951977.8jla5cTcNa@naboo> (raw)
In-Reply-To: <1379564168.13091.6.camel@dcbw.foobar.com>
[-- Attachment #1: Type: text/plain, Size: 1512 bytes --]
Le mercredi 18 septembre 2013 23:16:08 Dan Williams a écrit :
> On Wed, 2013-09-18 at 22:47 +0200, Detlev Casanova wrote:
> > Hello,
> >
> > After a bisection on the kernel, it seems that a patch is causing
a
> > problem with NetworkManager:
> >
> > commit 0172bb75073e11a5aa9d8a953bdaefb8709f00c8
("cfg80211:
> > use DS or HT operation IEs to determine BSS channel")
> >
> > The Wifi access points are not listed in the KDE plasma widget
and it
> > won't even connect to the saved ones even if they are in range.
> >
> > There is a fix though: running "iwlist wlan0 scan" twice as root
(which
> > properly lists APs in reach) and the second time must be run
about two
> > seconds after the first time.
> >
> > Then NetworkManager lists the access points and connects to
the
> > prefered one if possible (normal behavior).
> >
> > This also happens with nm-applet in Gnome.
> >
> > The hardware is: 14e4:4315 (Network controller: Broadcom
Corporation
> > BCM4312 802.11b/g LP-PHY (rev 01)) on an Intel Core i3 M370
CPU (64
> > bits) computer.
> >
> > The abnormal behaviour is not random, it happens every time.
>
> Can you run wpa_supplicant with debugging output? The quick
and dirty
> way is to:
>
> mv /usr/sbin/wpa_supplicant /
> killall -TERM wpa_supplicant
> /wpa_supplicant -dddtu
>
> and then wait for the problem to happen, and grab the log output
for us
> to analyze.
>
> Dan
Here is the output (attached file for formatting)
[-- Attachment #2: output --]
[-- Type: text/plain, Size: 25412 bytes --]
1379569812.462808: dbus: Register D-Bus object '/fi/w1/wpa_supplicant1'
1379569812.463387: Providing DBus service 'fi.w1.wpa_supplicant1'.
1379569812.463961: Providing DBus service 'fi.epitest.hostap.WPASupplicant'.
1379569812.464204: dbus: fi.w1.wpa_supplicant1.CreateInterface (/fi/w1/wpa_supplicant1)
1379569812.464274: Initializing interface 'wlan0' conf 'N/A' driver 'nl80211,wext' ctrl_interface 'N/A' bridge 'N/A'
1379569812.465509: netlink: Operstate: linkmode=1, operstate=5
1379569812.473709: Own MAC address: 00:16:44:f1:d3:07
1379569812.473746: wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x45ca89 key_idx=0 set_tx=0 seq_len=0 key_len=0
1379569812.473803: wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x45ca89 key_idx=1 set_tx=0 seq_len=0 key_len=0
1379569812.473840: wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x45ca89 key_idx=2 set_tx=0 seq_len=0 key_len=0
1379569812.473872: wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x45ca89 key_idx=3 set_tx=0 seq_len=0 key_len=0
1379569812.473889: RSN: flushing PMKID list in the driver
1379569812.473894: State: DISCONNECTED -> INACTIVE
1379569812.477830: EAPOL: SUPP_PAE entering state DISCONNECTED
1379569812.477840: EAPOL: Supplicant port status: Unauthorized
1379569812.477876: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
1379569812.477881: EAPOL: SUPP_BE entering state INITIALIZE
1379569812.477884: EAP: EAP entering state DISABLED
1379569812.477887: EAPOL: Supplicant port status: Unauthorized
1379569812.477903: EAPOL: Supplicant port status: Unauthorized
1379569812.477929: dbus: Register interface object '/fi/w1/wpa_supplicant1/Interfaces/1'
1379569812.478202: Added interface wlan0
1379569812.478284: dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1)
1379569812.479406: dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.479828: dbus: fi.w1.wpa_supplicant1.Interface.NetworkReply (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.479848: no method handler for fi.w1.wpa_supplicant1.Interface.NetworkReply on /fi/w1/wpa_supplicant1/Interfaces/1
1379569812.479985: dbus: org.freedesktop.DBus.Introspectable.Introspect (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.480838: dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.482196: dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.482692: Scan requested (ret=0) - scan timeout 10 seconds
1379569812.482872: dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569812.482915: nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
1379569812.483555: nl80211: Event message available
1379569812.483581: nl80211: Scan trigger
1379569813.478983: EAPOL: disable timer tick
1379569813.479019: EAPOL: Supplicant port status: Unauthorized
1379569814.163044: nl80211: Event message available
1379569814.163106: nl80211: New scan results available
1379569814.163159: Received scan results (0 BSSes)
1379569814.163173: BSS: Start scan result update 1
1379569814.163178: New scan results available
1379569814.163450: No suitable network found
1379569814.163457: State: INACTIVE -> INACTIVE
1379569814.163471: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569814.163480: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569835.357239: dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569835.357744: Scan requested (ret=0) - scan timeout 30 seconds
1379569835.357880: nl80211: Event message available
1379569835.357914: nl80211: Scan trigger
1379569837.039966: nl80211: Event message available
1379569837.040031: nl80211: New scan results available
1379569837.040140: Received scan results (0 BSSes)
1379569837.040149: BSS: Start scan result update 2
1379569837.040154: New scan results available
1379569837.040186: No suitable network found
1379569837.040193: State: INACTIVE -> INACTIVE
1379569837.040409: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569837.040426: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569837.045232: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569868.358662: dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569868.359106: Scan requested (ret=0) - scan timeout 30 seconds
1379569868.359206: nl80211: Event message available
1379569868.359224: nl80211: Scan trigger
1379569870.038738: nl80211: Event message available
1379569870.038808: nl80211: New scan results available
1379569870.038915: Received scan results (0 BSSes)
1379569870.038925: BSS: Start scan result update 3
1379569870.038928: New scan results available
1379569870.038947: No suitable network found
1379569870.038953: State: INACTIVE -> INACTIVE
1379569870.038964: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569870.038969: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569870.044029: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569883.691230: nl80211: Event message available
1379569883.691292: nl80211: Scan trigger
1379569884.810881: nl80211: Event message available
1379569884.810949: nl80211: New scan results available
1379569884.810989: Received scan results (0 BSSes)
1379569884.810996: BSS: Start scan result update 4
1379569884.811000: New scan results available
1379569884.811064: No suitable network found
1379569884.811070: State: INACTIVE -> INACTIVE
1379569884.811381: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569884.811393: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569889.035023: nl80211: Event message available
1379569889.035086: nl80211: Scan trigger
1379569890.153956: nl80211: Event message available
1379569890.154007: nl80211: New scan results available
1379569890.154073: Received scan results (2 BSSes)
1379569890.154082: BSS: Start scan result update 5
1379569890.154087: BSS: Add new id 0 BSSID 78:54:2e:a6:e3:80 SSID 'Maison'
1379569890.154096: dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0'
1379569890.154310: BSS: Add new id 1 BSSID 9c:d3:6d:98:2a:7c SSID 'VOO-264889'
1379569890.154317: dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1'
1379569890.154450: New scan results available
1379569890.154477: No suitable network found
1379569890.154483: State: INACTIVE -> INACTIVE
1379569890.154498: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569890.154505: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569890.159375: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569890.358936: dbus: org.freedesktop.DBus.Properties.Set (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569890.360391: dbus: fi.w1.wpa_supplicant1.Interface.AddNetwork (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569890.360437: dbus: Register network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0'
1379569890.360557: scan_ssid=1 (0x1)
1379569890.360569: ssid - hexdump_ascii(len=6):
4d 61 69 73 6f 6e Maison
1379569890.360584: key_mgmt: 0x2
1379569890.360594: PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
1379569890.372592: PSK (from passphrase) - hexdump(len=32): [REMOVED]
1379569890.373053: dbus: fi.w1.wpa_supplicant1.Interface.SelectNetwork (/fi/w1/wpa_supplicant1/Interfaces/1)
1379569890.373104: Setting scan request: 0 sec 0 usec
1379569890.373198: State: INACTIVE -> SCANNING
1379569890.373240: Scan SSID - hexdump_ascii(len=6):
4d 61 69 73 6f 6e Maison
1379569890.373264: Starting AP scan for wildcard SSID
1379569890.373306: nl80211: Scan SSID - hexdump_ascii(len=6):
4d 61 69 73 6f 6e Maison
1379569890.373340: nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
1379569890.374211: Scan requested (ret=0) - scan timeout 30 seconds
1379569890.374231: nl80211: Event message available
1379569890.374252: nl80211: Scan trigger
1379569890.378304: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569891.493950: nl80211: Event message available
1379569891.494003: nl80211: New scan results available
1379569891.494124: Received scan results (2 BSSes)
1379569891.494133: BSS: Start scan result update 6
1379569891.494150: New scan results available
1379569891.494170: Selecting BSS from priority group 0
1379569891.494173: Try to find WPA-enabled AP
1379569891.494176: 0: 78:54:2e:a6:e3:80 ssid='Maison' wpa_ie_len=26 rsn_ie_len=24 caps=0x431
1379569891.494182: selected based on RSN IE
1379569891.494184: selected WPA AP 78:54:2e:a6:e3:80 ssid='Maison'
1379569891.494190: Automatic auth_alg selection: 0x1
1379569891.494195: RSN: using IEEE 802.11i/D9.0
1379569891.494198: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
1379569891.494201: WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
1379569891.494209: WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.494216: WPA: using GTK TKIP
1379569891.494218: WPA: using PTK CCMP
1379569891.494220: WPA: using KEY_MGMT WPA-PSK
1379569891.494223: WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.494230: Cancelling scan request
1379569891.494233: Trying to authenticate with 78:54:2e:a6:e3:80 (SSID='Maison' freq=2447 MHz)
1379569891.494236: No keys have been configured - skip key clearing
1379569891.494239: State: SCANNING -> AUTHENTICATING
1379569891.494259: EAPOL: External notification - EAP success=0
1379569891.494264: EAPOL: Supplicant port status: Unauthorized
1379569891.494309: EAPOL: External notification - EAP fail=0
1379569891.494312: EAPOL: Supplicant port status: Unauthorized
1379569891.494327: EAPOL: External notification - portControl=Auto
1379569891.494330: EAPOL: Supplicant port status: Unauthorized
1379569891.494353: nl80211: Authenticate (ifindex=6)
1379569891.494357: * bssid=78:54:2e:a6:e3:80
1379569891.494360: * freq=2447
1379569891.494362: * SSID - hexdump_ascii(len=6):
4d 61 69 73 6f 6e Maison
1379569891.494368: * IEs - hexdump(len=0): [NULL]
1379569891.494370: * Auth Type 0
1379569891.503619: nl80211: Authentication request send successfully
1379569891.503677: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569891.503763: nl80211: Event message available
1379569891.503778: nl80211: Ignored unknown event (cmd=19)
1379569891.503786: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1379569891.503792: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569891.503800: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0
1379569891.503829: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1
1379569891.505465: nl80211: Event message available
1379569891.505482: nl80211: MLME event 37
1379569891.505485: nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 00 16 44 f1 d3 07 78 54 2e a6 e3 80 78 54 2e a6 e3 80 50 a1 00 00 02 00 00 00
1379569891.505494: SME: Authentication response: peer=78:54:2e:a6:e3:80 auth_type=0 status_code=0
1379569891.505497: SME: Authentication response IEs - hexdump(len=0): [NULL]
1379569891.505502: Trying to associate with 78:54:2e:a6:e3:80 (SSID='Maison' freq=2447 MHz)
1379569891.505505: State: AUTHENTICATING -> ASSOCIATING
1379569891.505507: wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
1379569891.505511: netlink: Operstate: linkmode=-1, operstate=5
1379569891.505548: WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.505561: nl80211: Associate (ifindex=6)
1379569891.505567: * bssid=78:54:2e:a6:e3:80
1379569891.505571: * freq=2447
1379569891.505574: * SSID - hexdump_ascii(len=6):
4d 61 69 73 6f 6e Maison
1379569891.505583: * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.505611: nl80211: Association request send successfully
1379569891.510618: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569891.512395: RX EAPOL from 78:54:2e:a6:e3:80
1379569891.512418: RX EAPOL - hexdump(len=121): 01 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.512515: Not associated - Delay processing of received EAPOL frame
1379569891.512541: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1379569891.512546: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569891.512684: nl80211: Event message available
1379569891.512913: nl80211: MLME event 38
1379569891.512918: nl80211: MLME event frame - hexdump(len=106): 10 00 3a 01 00 16 44 f1 d3 07 78 54 2e a6 e3 80 78 54 2e a6 e3 80 60 a1 31 04 00 00 03 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 06 00 e0 4c 02 01 60
1379569891.512949: Association info event
1379569891.512952: resp_ies - hexdump(len=76): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 06 00 e0 4c 02 01 60
1379569891.512986: freq=2447 MHz
1379569891.512998: State: ASSOCIATING -> ASSOCIATED
1379569891.513008: wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
1379569891.513018: netlink: Operstate: linkmode=-1, operstate=5
1379569891.513137: Associated to a new BSS: BSSID=78:54:2e:a6:e3:80
1379569891.513159: No keys have been configured - skip key clearing
1379569891.513173: Associated with 78:54:2e:a6:e3:80
1379569891.513181: WPA: Association event - clear replay counter
1379569891.513198: WPA: Clear old PTK
1379569891.513207: EAPOL: External notification - portEnabled=0
1379569891.513215: EAPOL: Supplicant port status: Unauthorized
1379569891.513309: EAPOL: External notification - portValid=0
1379569891.513323: EAPOL: Supplicant port status: Unauthorized
1379569891.513381: EAPOL: External notification - EAP success=0
1379569891.513394: EAPOL: Supplicant port status: Unauthorized
1379569891.513437: EAPOL: External notification - portEnabled=1
1379569891.513445: EAPOL: SUPP_PAE entering state CONNECTING
1379569891.513450: EAPOL: enable timer tick
1379569891.513456: EAPOL: SUPP_BE entering state IDLE
1379569891.513464: Setting authentication timeout: 10 sec 0 usec
1379569891.513471: Cancelling scan request
1379569891.513477: Process pending EAPOL frame that was received just before association notification
1379569891.513482: RX EAPOL from 78:54:2e:a6:e3:80
1379569891.513488: RX EAPOL - hexdump(len=121): 01 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513543: Setting authentication timeout: 10 sec 0 usec
1379569891.513551: IEEE 802.1X RX: version=1 type=3 length=117
1379569891.513557: EAPOL-Key type=2
1379569891.513562: key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
1379569891.513569: key_length=16 key_data_length=22
1379569891.513575: replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
1379569891.513583: key_nonce - hexdump(len=32): 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0
1379569891.513600: key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513611: key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
1379569891.513620: key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
1379569891.513628: key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513687: WPA: RX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513763: State: ASSOCIATED -> 4WAY_HANDSHAKE
1379569891.513818: WPA: RX message 1 of 4-Way Handshake from 78:54:2e:a6:e3:80 (ver=2)
1379569891.513824: RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513834: WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513844: RSN: PMKID from Authenticator - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1379569891.513852: RSN: no matching PMKID found
1379569891.514277: WPA: Renewed SNonce - hexdump(len=32): 9b 1d 73 09 5a c7 3a 2c b3 91 4d 52 d1 02 08 4b d0 ad da 74 b0 0c 76 f6 3c 1f dc b2 7b 50 29 c1
1379569891.514303: WPA: PTK derivation - A1=00:16:44:f1:d3:07 A2=78:54:2e:a6:e3:80
1379569891.514307: WPA: PMK - hexdump(len=32): [REMOVED]
1379569891.514309: WPA: PTK - hexdump(len=48): [REMOVED]
1379569891.514313: WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.514321: WPA: Sending EAPOL-Key 2/4
1379569891.514326: WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 9b 1d 73 09 5a c7 3a 2c b3 91 4d 52 d1 02 08 4b d0 ad da 74 b0 0c 76 f6 3c 1f dc b2 7b 50 29 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 27 2b b9 d1 57 b8 ca 94 d0 00 47 ad b5 3d 08 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.514373: nl80211: Event message available
1379569891.514577: nl80211: Ignore connect event (cmd=46) when using userspace SME
1379569891.514583: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1379569891.514587: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569891.514591: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1379569891.514593: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569891.518190: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569891.518547: RX EAPOL from 78:54:2e:a6:e3:80
1379569891.518568: RX EAPOL - hexdump(len=179): 01 03 00 af 02 13 ca 00 10 00 00 00 00 00 00 00 02 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 13 62 07 00 00 00 00 00 00 00 00 00 00 00 00 00 b8 d4 c6 fa 60 3e c7 57 bb 19 33 00 4e 6b 1a 9d 00 50 9d 0f 44 b0 9e 21 3b f3 3f 17 32 3d 92 45 cd 84 b3 56 07 af d1 81 44 22 8e d4 1d fc 16 cb a3 a3 0b 24 7c 04 95 f7 b7 c4 54 0e 56 6a 31 d6 61 c3 2d 56 84 04 a8 99 78 07 22 0e 4a 61 7f a1 6b 3d 19 c8 7d 22 de 5d 96 e9 93 be 90 ce 66 9c d6 02
1379569891.518677: IEEE 802.1X RX: version=1 type=3 length=175
1379569891.518682: EAPOL-Key type=2
1379569891.518685: key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
1379569891.518690: key_length=16 key_data_length=80
1379569891.518693: replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
1379569891.518698: key_nonce - hexdump(len=32): 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0
1379569891.518705: key_iv - hexdump(len=16): 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e
1379569891.518709: key_rsc - hexdump(len=8): 13 62 07 00 00 00 00 00
1379569891.518712: key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
1379569891.518715: key_mic - hexdump(len=16): b8 d4 c6 fa 60 3e c7 57 bb 19 33 00 4e 6b 1a 9d
1379569891.518721: WPA: RX EAPOL-Key - hexdump(len=179): 01 03 00 af 02 13 ca 00 10 00 00 00 00 00 00 00 02 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 0e c5 26 3f 76 43 50 d8 90 d4 06 b4 df fa d1 a0 38 95 71 ca a5 53 62 64 60 94 a9 0a 02 fe 5b 0e 13 62 07 00 00 00 00 00 00 00 00 00 00 00 00 00 b8 d4 c6 fa 60 3e c7 57 bb 19 33 00 4e 6b 1a 9d 00 50 9d 0f 44 b0 9e 21 3b f3 3f 17 32 3d 92 45 cd 84 b3 56 07 af d1 81 44 22 8e d4 1d fc 16 cb a3 a3 0b 24 7c 04 95 f7 b7 c4 54 0e 56 6a 31 d6 61 c3 2d 56 84 04 a8 99 78 07 22 0e 4a 61 7f a1 6b 3d 19 c8 7d 22 de 5d 96 e9 93 be 90 ce 66 9c d6 02
1379569891.518768: RSN: encrypted key data - hexdump(len=80): 9d 0f 44 b0 9e 21 3b f3 3f 17 32 3d 92 45 cd 84 b3 56 07 af d1 81 44 22 8e d4 1d fc 16 cb a3 a3 0b 24 7c 04 95 f7 b7 c4 54 0e 56 6a 31 d6 61 c3 2d 56 84 04 a8 99 78 07 22 0e 4a 61 7f a1 6b 3d 19 c8 7d 22 de 5d 96 e9 93 be 90 ce 66 9c d6 02
1379569891.518825: WPA: decrypted EAPOL-Key key data - hexdump(len=72): [REMOVED]
1379569891.518830: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
1379569891.518832: WPA: RX message 3 of 4-Way Handshake from 78:54:2e:a6:e3:80 (ver=2)
1379569891.518835: WPA: IE KeyData - hexdump(len=72): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00 dd 26 00 0f ac 01 01 00 e7 67 6b e9 f6 cd 28 01 26 73 14 61 45 d8 db 44 90 79 47 6b 3c df f4 85 55 4a 5e 5b 87 37 69 8b dd 00 00 00 00 00
1379569891.518848: WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
1379569891.518855: WPA: GTK in EAPOL-Key - hexdump(len=40): [REMOVED]
1379569891.518858: WPA: Sending EAPOL-Key 4/4
1379569891.518863: WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 da 41 37 9d fa e7 2a 6c 88 9d 37 e1 e5 fd b2 d3 00 00
1379569891.518890: WPA: Installing PTK to the driver.
1379569891.518916: wpa_driver_nl80211_set_key: ifindex=6 alg=3 addr=0xbcec60 key_idx=0 set_tx=1 seq_len=6 key_len=16
1379569891.518924: addr=78:54:2e:a6:e3:80
1379569891.519171: EAPOL: External notification - portValid=1
1379569891.519180: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
1379569891.519219: RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED]
1379569891.519226: WPA: Group Key - hexdump(len=32): [REMOVED]
1379569891.519229: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=32).
1379569891.519233: WPA: RSC - hexdump(len=6): 13 62 07 00 00 00
1379569891.519247: wpa_driver_nl80211_set_key: ifindex=6 alg=2 addr=0x45ca89 key_idx=1 set_tx=0 seq_len=6 key_len=32
1379569891.519272: WPA: Key negotiation completed with 78:54:2e:a6:e3:80 [PTK=CCMP GTK=TKIP]
1379569891.519278: Cancelling authentication timeout
1379569891.519282: State: GROUP_HANDSHAKE -> COMPLETED
1379569891.519287: CTRL-EVENT-CONNECTED - Connection to 78:54:2e:a6:e3:80 completed (auth) [id=0 id_str=]
1379569891.519291: wpa_driver_nl80211_set_operstate: operstate 0->1 (UP)
1379569891.519295: netlink: Operstate: linkmode=-1, operstate=6
1379569891.519355: EAPOL: External notification - portValid=1
1379569891.519361: EAPOL: External notification - EAP success=1
1379569891.519365: EAPOL: SUPP_PAE entering state AUTHENTICATING
1379569891.519368: EAPOL: SUPP_BE entering state SUCCESS
1379569891.519371: EAP: EAP entering state DISABLED
1379569891.519374: EAPOL: SUPP_PAE entering state AUTHENTICATED
1379569891.519377: EAPOL: Supplicant port status: Authorized
1379569891.519406: EAPOL: SUPP_BE entering state IDLE
1379569891.519411: EAPOL authentication completed successfully
1379569891.519421: RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1379569891.519427: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1379569891.524282: dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
1379569893.049791: nl80211: Event message available
1379569894.059793: nl80211: Event message available
1379569894.515643: EAPOL: startWhen --> 0
1379569894.515671: EAPOL: disable timer tick
1379569895.059803: nl80211: Event message available
1379569896.049785: nl80211: Event message available
1379569897.059991: nl80211: Event message available
1379569898.059787: nl80211: Event message available
1379569899.059786: nl80211: Event message available
1379569900.049789: nl80211: Event message available
1379569901.059764: nl80211: Event message available
1379569902.053868: nl80211: Event message available
next prev parent reply other threads:[~2013-09-19 5:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 20:47 NetworkManager not listing access points Detlev Casanova
2013-09-19 4:16 ` Dan Williams
2013-09-19 5:58 ` Detlev Casanova [this message]
2013-09-21 20:51 ` Johannes Berg
2013-09-22 14:20 ` Detlev Casanova
2013-09-23 16:13 ` Dan Williams
2013-09-29 19:29 ` Detlev Casanova
2013-10-02 9:08 ` Johannes Berg
[not found] ` <2916718.7t7kLXuBQV@naboo>
2013-10-07 7:40 ` Johannes Berg
2013-10-11 15:43 ` Detlev Casanova
2013-10-17 14:38 ` Johannes Berg
2013-10-17 16:19 ` Will Hawkins
2013-10-21 13:06 ` Johannes Berg
2013-10-21 20:20 ` Will Hawkins
2013-09-29 21:10 ` Rafał Miłecki
2013-09-29 21:11 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5951977.8jla5cTcNa@naboo \
--to=detlev.casanova@gmail.com \
--cc=dcbw@redhat.com \
--cc=johannes.berg@intel.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.