From: Jason Yan <yanaijie@huawei.com>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: about warning in ata_eh_finish()
Date: Thu, 21 Dec 2017 09:31:20 +0800 [thread overview]
Message-ID: <5A3B0EE8.2060707@huawei.com> (raw)
In-Reply-To: <20171220173636.GC3413940@devbig577.frc2.facebook.com>
Tejun,
On 2017/12/21 1:36, Tejun Heo wrote:
> Which kernel version are you running on what sort of device? Can you
> post the full log?
We have tested kernel 4.12 to 4.15, all have this warning.
Some sas/sata disks directly connected to hisi sas controller.
The full log is as follows, please ignore the duplicated log because I
didn't close the boot console.
--IPOP Time:12/3/2017_2:03:56--
[26578.886290] driverversion:v1.6.
[26578.886290] driverversion:v1.6.
[26578.897569] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26578.897569] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26578.925190] | 0| 0| 0| 0 | 0 |
2 |0x5001882016000000| 0|
[26578.925190] | 0| 0| 0| 0 | 0 |
2 |0x5001882016000000| 0|
[26578.951506] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26578.951506] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26578.976032] | 0 | 0| 0| 0|
0| 0| 0|
[26578.976032] | 0 | 0| 0| 0|
0| 0| 0|
[26579.000336] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.000336] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.025793] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.025793] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.051973] | 0| 1| 1| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.051973] | 0| 1| 1| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.077037] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.077037] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.101389] | 0 | 0| 0| 0|
0| 0| 0|
[26579.101389] | 0 | 0| 0| 0|
0| 0| 0|
[26579.125601] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.125601] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.150496] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.150496] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.175551] | 0| 2| 2| 0 | 0 |
1 |0x5001882016000000| 0|
[26579.175551] | 0| 2| 2| 0 | 0 |
1 |0x5001882016000000| 0|
[26579.200592] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.200592] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.224980] | 0 | 0| 0| 0|
0| 0| 0|
[26579.224980] | 0 | 0| 0| 0|
0| 0| 0|
[26579.249208] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.249208] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.274325] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.274325] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.299307] | 0| 3| 3| 0 | 0 |
1 |0x5001882016000000| 0|
[26579.299307] | 0| 3| 3| 0 | 0 |
1 |0x5001882016000000| 0|
[26579.324170] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.324170] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.348738] | 0 | 0| 0| 0|
0| 0| 0|
[26579.348738] | 0 | 0| 0| 0|
0| 0| 0|
[26579.372943] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.372943] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.397802] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.397802] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.423176] | 0| 4| 4| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.423176] | 0| 4| 4| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.448025] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.448025] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.472366] | 0 | 0| 0| 0|
0| 0| 0|
[26579.472366] | 0 | 0| 0| 0|
0| 0| 0|
[26579.496780] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.496780] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.521676] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.521676] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.546648] | 0| 5| 5| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.546648] | 0| 5| 5| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.571522] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.571522] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.595796] | 0 | 0| 0| 0|
0| 0| 0|
[26579.595796] | 0 | 0| 0| 0|
0| 0| 0|
[26579.620742] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.620742] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.646939] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.646939] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.671955] | 0| 6| 6| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.671955] | 0| 6| 6| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.696767] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.696767] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.722604] | 0 | 0| 0| 0|
0| 0| 0|
[26579.722604] | 0 | 0| 0| 0|
0| 0| 0|
[26579.746776] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.746776] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.771601] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.771601] |core id|port id | phy id |phy mode | phy status | phy
type | dev sas address |dev info |
[26579.796675] | 0| 7| 7| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.796675] | 0| 7| 7| 0 | 0 |
2 |0x5001882016000000| 0|
[26579.821494] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.821494] |dq_1b_ecc |iost_1b_ecc
|tct_ram_ecc|dq_ram_ecc|iost_ram_ecc|itct_1b_ecc|axi incorrect|
[26579.845648] | 0 | 0| 0| 0|
0| 0| 0|
[26579.845648] | 0 | 0| 0| 0|
0| 0| 0|
[26579.870194] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.870194] - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
[26579.895005]
===================================================================================================
[26579.895005]
===================================================================================================
[26579.922206] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26579.922206] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26579.949162] | 0| 0| 0| 8| 16|
8| 8| 11| 1.5G|
[26579.949162] | 0| 0| 0| 8| 16|
8| 8| 11| 1.5G|
[26579.976014]
===================================================================================================
[26579.976014]
===================================================================================================
[26580.002861] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.002861] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.029907] | 0| 1| 1| 8| 16|
8| 8| 11| 1.5G|
[26580.029907] | 0| 1| 1| 8| 16|
8| 8| 11| 1.5G|
[26580.057054]
===================================================================================================
[26580.057054]
===================================================================================================
[26580.083917] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.083917] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.110862] | 0| 2| 2| 8| 16|
8| 8| 11| 1.5G|
[26580.110862] | 0| 2| 2| 8| 16|
8| 8| 11| 1.5G|
[26580.137742]
===================================================================================================
[26580.137742]
===================================================================================================
[26580.164967] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.164967] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.191859] | 0| 3| 3| 8| 16|
8| 8| 11| 1.5G|
[26580.191859] | 0| 3| 3| 8| 16|
8| 8| 11| 1.5G|
[26580.218635]
===================================================================================================
[26580.218635]
===================================================================================================
[26580.245459] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.245459] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.272329] | 0| 4| 4| 8| 16|
8| 8| 11| 1.5G|
[26580.272329] | 0| 4| 4| 8| 16|
8| 8| 11| 1.5G|
[26580.299178]
===================================================================================================
[26580.299178]
===================================================================================================
[26580.326276] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.326276] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.353183] | 0| 5| 5| 8| 16|
8| 8| 11| 1.5G|
[26580.353183] | 0| 5| 5| 8| 16|
8| 8| 11| 1.5G|
[26580.379961]
===================================================================================================
[26580.379961]
===================================================================================================
[26580.406824] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.406824] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.433665] | 0| 6| 6| 8| 16|
8| 8| 11| 1.5G|
[26580.433665] | 0| 6| 6| 8| 16|
8| 8| 11| 1.5G|
[26580.460516]
===================================================================================================
[26580.460516]
===================================================================================================
[26580.487277] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.487277] |core id|port id|phy id|phy nums|queue count|max phy
nums|mini linkrate|max linkrate|nego linkrate|
[26580.514383] | 0| 7| 7| 8| 16|
8| 8| 11| 1.5G|
[26580.514383] | 0| 7| 7| 8| 16|
8| 8| 11| 1.5G|
[26625.414506] hisi_sas_v3_hw 0000:74:02.0: phydown: phy0 phy_state=0xfe
[26625.414506] hisi_sas_v3_hw 0000:74:02.0: phydown: phy0 phy_state=0xfe
[26625.930184] sd 2:0:46:0: [sda] Synchronizing SCSI cache
[26625.930184] sd 2:0:46:0: [sda] Synchronizing SCSI cache
[26626.029224] sd 2:0:46:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26626.029224] sd 2:0:46:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26626.379429] hisi_sas_v3_hw 0000:74:02.0: dev[0:1] is gone
[26626.379429] hisi_sas_v3_hw 0000:74:02.0: dev[0:1] is gone
--IPOP Time:12/3/2017_2:04:56--
[26636.989039] hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=8
[26636.989039] hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=8
[26637.107664] hisi_sas_v3_hw 0000:74:02.0: dev[0:1] found
[26637.107664] hisi_sas_v3_hw 0000:74:02.0: dev[0:1] found
[26637.480378] scsi 2:0:54:0: Direct-Access HGST HUC101818CS4200
A902 PQ: 0 ANSI: 6
[26637.480378] scsi 2:0:54:0: Direct-Access HGST HUC101818CS4200
A902 PQ: 0 ANSI: 6
[26638.259023] sd 2:0:54:0: [sda] 3516328368 512-byte logical blocks:
(1.80 TB/1.64 TiB)
[26638.259023] sd 2:0:54:0: [sda] 3516328368 512-byte logical blocks:
(1.80 TB/1.64 TiB)
[26638.284719] sd 2:0:54:0: [sda] 4096-byte physical blocks
[26638.284719] sd 2:0:54:0: [sda] 4096-byte physical blocks
[26638.343873] sd 2:0:54:0: [sda] Write Protect is off
[26638.343873] sd 2:0:54:0: [sda] Write Protect is off
[26638.526156] sd 2:0:54:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26638.526156] sd 2:0:54:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26640.229889] sd 2:0:54:0: [sda] Attached SCSI disk
[26640.229889] sd 2:0:54:0: [sda] Attached SCSI disk
[26648.873697] hisi_sas_v3_hw 0000:74:02.0: phydown: phy1 phy_state=0xfd
[26648.873697] hisi_sas_v3_hw 0000:74:02.0: phydown: phy1 phy_state=0xfd
[26649.219357] sd 2:0:47:0: [sdb] Synchronizing SCSI cache
[26649.219357] sd 2:0:47:0: [sdb] Synchronizing SCSI cache
[26649.286834] sd 2:0:47:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26649.286834] sd 2:0:47:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26649.724381] hisi_sas_v3_hw 0000:74:02.0: dev[1:1] is gone
[26649.724381] hisi_sas_v3_hw 0000:74:02.0: dev[1:1] is gone
[26660.708058] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=8
[26660.708058] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=8
[26660.820772] hisi_sas_v3_hw 0000:74:02.0: dev[1:1] found
[26660.820772] hisi_sas_v3_hw 0000:74:02.0: dev[1:1] found
[26661.157316] scsi 2:0:55:0: Direct-Access SEAGATE ST600MM0088
N003 PQ: 0 ANSI: 6
[26661.157316] scsi 2:0:55:0: Direct-Access SEAGATE ST600MM0088
N003 PQ: 0 ANSI: 6
[26662.261880] sd 2:0:55:0: [sdb] 1172123568 512-byte logical blocks:
(600 GB/559 GiB)
[26662.261880] sd 2:0:55:0: [sdb] 1172123568 512-byte logical blocks:
(600 GB/559 GiB)
[26662.340445] sd 2:0:55:0: [sdb] Write Protect is off
[26662.340445] sd 2:0:55:0: [sdb] Write Protect is off
[26662.497744] sd 2:0:55:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26662.497744] sd 2:0:55:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26663.814019] sd 2:0:55:0: [sdb] Attached SCSI disk
[26663.814019] sd 2:0:55:0: [sdb] Attached SCSI disk
[26672.036357] hisi_sas_v3_hw 0000:74:02.0: phydown: phy2 phy_state=0xfb
[26672.036357] hisi_sas_v3_hw 0000:74:02.0: phydown: phy2 phy_state=0xfb
[26672.284269] sd 2:0:48:0: [sdc] Synchronizing SCSI cache
[26672.284269] sd 2:0:48:0: [sdc] Synchronizing SCSI cache
[26672.320666] sd 2:0:48:0: [sdc] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26672.320666] sd 2:0:48:0: [sdc] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26672.351326] sd 2:0:48:0: [sdc] Stopping disk
[26672.351326] sd 2:0:48:0: [sdc] Stopping disk
[26672.371145] sd 2:0:48:0: [sdc] Start/Stop Unit failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26672.371145] sd 2:0:48:0: [sdc] Start/Stop Unit failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
--IPOP Time:12/3/2017_2:05:57--
[26703.586351] hisi_sas_v3_hw 0000:74:02.0: task prep: SATA/STP port2
not attach device
[26703.586351] hisi_sas_v3_hw 0000:74:02.0: task prep: SATA/STP port2
not attach device
[26703.607605] hisi_sas_v3_hw 0000:74:02.0: task exec: failed[138]!
[26703.607605] hisi_sas_v3_hw 0000:74:02.0: task exec: failed[138]!
[26703.627180] hisi_sas_v3_hw 0000:74:02.0: abort tmf: executing
internal task failed: 138
[26703.627180] hisi_sas_v3_hw 0000:74:02.0: abort tmf: executing
internal task failed: 138
[26703.649037] hisi_sas_v3_hw 0000:74:02.0: ata disk reset failed
[26703.649037] hisi_sas_v3_hw 0000:74:02.0: ata disk reset failed
[26703.666632] hisi_sas_v3_hw 0000:74:02.0: abort task: rc=138
[26703.666632] hisi_sas_v3_hw 0000:74:02.0: abort task: rc=138
[26705.746557] ------------[ cut here ]------------
[26705.746557] ------------[ cut here ]------------
[26705.760518] WARNING: CPU: 1 PID: 6796 at drivers/ata/libata-eh.c:4037
ata_eh_finish+0xb4/0xcc
[26705.760518] WARNING: CPU: 1 PID: 6796 at drivers/ata/libata-eh.c:4037
ata_eh_finish+0xb4/0xcc
[26705.782955] Modules linked in: debug_nic_mii(OE) hisi_sas_test_hw(OE)
hisi_sas_test_main(OE)
[26705.782955] Modules linked in: debug_nic_mii(OE) hisi_sas_test_hw(OE)
hisi_sas_test_main(OE)
[26705.806236] CPU: 1 PID: 6796 Comm: kworker/u4:2 Tainted: G
OEL 4.14.0 #1
[26705.806236] CPU: 1 PID: 6796 Comm: kworker/u4:2 Tainted: G
OEL 4.14.0 #1
[26705.827152] Workqueue: events_unbound async_run_entry_fn
[26705.827152] Workqueue: events_unbound async_run_entry_fn
[26705.841354] task: ffff8021f7761080 task.stack: ffff00000fb28000
[26705.841354] task: ffff8021f7761080 task.stack: ffff00000fb28000
[26705.857045] PC is at ata_eh_finish+0xb4/0xcc
[26705.857045] PC is at ata_eh_finish+0xb4/0xcc
[26705.868483] LR is at ata_do_eh+0x68/0xd8
[26705.868483] LR is at ata_do_eh+0x68/0xd8
[26705.878946] pc : [<ffff0000088baf70>] lr : [<ffff0000088bb764>]
pstate: 60c00149
[26705.878946] pc : [<ffff0000088baf70>] lr : [<ffff0000088bb764>]
pstate: 60c00149
[26705.898332] sp : ffff00000fb2bc40
[26705.898332] sp : ffff00000fb2bc40
[26705.907213] x29: ffff00000fb2bc40 x28: ffff8021ede761a0
[26705.907213] x29: ffff00000fb2bc40 x28: ffff8021ede761a0
[26705.921495] x27: 0000000000020200 x26: ffff8021ede76218
[26705.921495] x27: 0000000000020200 x26: ffff8021ede76218
[26705.935716] x25: ffff8021ede75e80 x24: 0000000000000140
[26705.935716] x25: ffff8021ede75e80 x24: 0000000000000140
[26705.949909] x23: ffff0000088adb8c x22: ffff000008878fe4
[26705.949909] x23: ffff0000088adb8c x22: ffff000008878fe4
[26705.964086] x21: ffff8021ede74000 x20: ffff8021ede75e38
[26705.964086] x21: ffff8021ede74000 x20: ffff8021ede75e38
[26705.978292] x19: ffff8021ede75e38 x18: 000000000003fee6
[26705.978292] x19: ffff8021ede75e38 x18: 000000000003fee6
[26705.992502] x17: 0000ffffbc4eb5b8 x16: ffff00000814a650
[26705.992502] x17: 0000ffffbc4eb5b8 x16: ffff00000814a650
[26706.006700] x15: 00001c71e0000000 x14: 0000000000000000
[26706.006700] x15: 00001c71e0000000 x14: 0000000000000000
[26706.020896] x13: 0000000000000000 x12: 0000000000000000
[26706.020896] x13: 0000000000000000 x12: 0000000000000000
[26706.035096] x11: 0000000000000000 x10: 0000000000000000
[26706.035096] x11: 0000000000000000 x10: 0000000000000000
[26706.049291] x9 : 0000000000000000 x8 : 0000000000000000
[26706.049291] x9 : 0000000000000000 x8 : 0000000000000000
[26706.063450] x7 : ffff8021ede75000 x6 : 0000000000000000
[26706.063450] x7 : ffff8021ede75000 x6 : 0000000000000000
[26706.077657] x5 : 0000000000000000 x4 : ffff8021ede75e80
[26706.077657] x5 : 0000000000000000 x4 : ffff8021ede75e80
[26706.091791] x3 : 0000000000000000 x2 : e51c5c8d83755700
[26706.091791] x3 : 0000000000000000 x2 : e51c5c8d83755700
[26706.105972] x1 : 0000000000000000 x0 : 0000000000000001
[26706.105972] x1 : 0000000000000000 x0 : 0000000000000001
[26706.120282] Call trace:
[26706.120282] Call trace:
[26706.127051] Exception stack(0xffff00000fb2bb00 to 0xffff00000fb2bc40)
[26706.127051] Exception stack(0xffff00000fb2bb00 to 0xffff00000fb2bc40)
[26706.144156] bb00: 0000000000000001 0000000000000000 e51c5c8d83755700
0000000000000000
[26706.144156] bb00: 0000000000000001 0000000000000000 e51c5c8d83755700
0000000000000000
[26706.164797] bb20: ffff8021ede75e80 0000000000000000 0000000000000000
ffff8021ede75000
[26706.164797] bb20: ffff8021ede75e80 0000000000000000 0000000000000000
ffff8021ede75000
[26706.185380] bb40: 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[26706.185380] bb40: 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[26706.205972] bb60: 0000000000000000 0000000000000000 0000000000000000
00001c71e0000000
[26706.205972] bb60: 0000000000000000 0000000000000000 0000000000000000
00001c71e0000000
[26706.226616] bb80: ffff00000814a650 0000ffffbc4eb5b8 000000000003fee6
ffff8021ede75e38
[26706.226616] bb80: ffff00000814a650 0000ffffbc4eb5b8 000000000003fee6
ffff8021ede75e38
[26706.247247] bba0: ffff8021ede75e38 ffff8021ede74000 ffff000008878fe4
ffff0000088adb8c
[26706.247247] bba0: ffff8021ede75e38 ffff8021ede74000 ffff000008878fe4
ffff0000088adb8c
[26706.267813] bbc0: 0000000000000140 ffff8021ede75e80 ffff8021ede76218
0000000000020200
[26706.267813] bbc0: 0000000000000140 ffff8021ede75e80 ffff8021ede76218
0000000000020200
[26706.288375] bbe0: ffff8021ede761a0 ffff00000fb2bc40 ffff0000088bb764
ffff00000fb2bc40
[26706.288375] bbe0: ffff8021ede761a0 ffff00000fb2bc40 ffff0000088bb764
ffff00000fb2bc40
[26706.308933] bc00: ffff0000088baf70 0000000060c00149 ffff8021ede77790
00000000088b8c60
[26706.308933] bc00: ffff0000088baf70 0000000060c00149 ffff8021ede77790
00000000088b8c60
[26706.329512] bc20: ffffffffffffffff 0000000000000000 ffff00000fb2bc40
ffff0000088baf70
[26706.329512] bc20: ffffffffffffffff 0000000000000000 ffff00000fb2bc40
ffff0000088baf70
[26706.350156] [<ffff0000088baf70>] ata_eh_finish+0xb4/0xcc
[26706.350156] [<ffff0000088baf70>] ata_eh_finish+0xb4/0xcc
[26706.364260] [<ffff0000088bb764>] ata_do_eh+0x68/0xd8
[26706.364260] [<ffff0000088bb764>] ata_do_eh+0x68/0xd8
[26706.377497] [<ffff0000088bb818>] ata_std_error_handler+0x44/0x8c
[26706.377497] [<ffff0000088bb818>] ata_std_error_handler+0x44/0x8c
[26706.393406] [<ffff0000088bb408>] ata_scsi_port_error_handler+0x480/0x694
[26706.393406] [<ffff0000088bb408>] ata_scsi_port_error_handler+0x480/0x694
[26706.411352] [<ffff000008879364>] async_sas_ata_eh+0x4c/0x80
[26706.411352] [<ffff000008879364>] async_sas_ata_eh+0x4c/0x80
[26706.426133] [<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170
[26706.426133] [<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170
[26706.441841] [<ffff0000080ebd70>] process_one_work+0x144/0x390
[26706.441841] [<ffff0000080ebd70>] process_one_work+0x144/0x390
[26706.457057] [<ffff0000080ec100>] worker_thread+0x144/0x418
[26706.457057] [<ffff0000080ec100>] worker_thread+0x144/0x418
[26706.471610] [<ffff0000080f2c98>] kthread+0x10c/0x138
[26706.471610] [<ffff0000080f2c98>] kthread+0x10c/0x138
[26706.484991] [<ffff0000080855dc>] ret_from_fork+0x10/0x18
[26706.484991] [<ffff0000080855dc>] ret_from_fork+0x10/0x18
[26706.499044] ---[ end trace b555600a8adbf64c ]---
[26706.499044] ---[ end trace b555600a8adbf64c ]---
[26706.541683] scsi 2:0:48:0: [sdc] tag#1 FAILED Result:
hostbyte=DID_ABORT driverbyte=DRIVER_OK
[26706.541683] scsi 2:0:48:0: [sdc] tag#1 FAILED Result:
hostbyte=DID_ABORT driverbyte=DRIVER_OK
[26706.567810] scsi 2:0:48:0: [sdc] tag#1 CDB: Read(16) 88 00 00 00 00
00 12 bf 94 b0 00 00 05 98 00 00
[26706.567810] scsi 2:0:48:0: [sdc] tag#1 CDB: Read(16) 88 00 00 00 00
00 12 bf 94 b0 00 00 05 98 00 00
[26706.595023] print_req_error: I/O error, dev sdc, sector 314545328
[26706.595023] print_req_error: I/O error, dev sdc, sector 314545328
[26706.620247] scsi 2:0:48:0: [sdc] tag#0 FAILED Result:
hostbyte=DID_ABORT driverbyte=DRIVER_OK
[26706.620247] scsi 2:0:48:0: [sdc] tag#0 FAILED Result:
hostbyte=DID_ABORT driverbyte=DRIVER_OK
[26706.644961] scsi 2:0:48:0: [sdc] tag#0 CDB: Read(16) 88 00 00 00 00
00 12 bf 8c b0 00 00 08 00 00 00
[26706.644961] scsi 2:0:48:0: [sdc] tag#0 CDB: Read(16) 88 00 00 00 00
00 12 bf 8c b0 00 00 08 00 00 00
[26706.669886] print_req_error: I/O error, dev sdc, sector 314543280
[26706.669886] print_req_error: I/O error, dev sdc, sector 314543280
[26706.830360] hisi_sas_v3_hw 0000:74:02.0: dev[2:5] is gone
[26706.830360] hisi_sas_v3_hw 0000:74:02.0: dev[2:5] is gone
[26707.136481] hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=8(sata)
[26707.136481] hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=8(sata)
[26707.197919] hisi_sas_v3_hw 0000:74:02.0: dev[2:5] found
[26707.197919] hisi_sas_v3_hw 0000:74:02.0: dev[2:5] found
[26707.591580] ata17.00: ATA-9: HUS726060ALE610, T7MH, max UDMA/133
[26707.591580] ata17.00: ATA-9: HUS726060ALE610, T7MH, max UDMA/133
[26707.609692] ata17.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[26707.609692] ata17.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[26707.684979] ata17.00: configured for UDMA/133
[26707.684979] ata17.00: configured for UDMA/133
[26707.875096] scsi 2:0:56:0: Direct-Access ATA HUS726060ALE610
T7MH PQ: 0 ANSI: 5
[26707.875096] scsi 2:0:56:0: Direct-Access ATA HUS726060ALE610
T7MH PQ: 0 ANSI: 5
[26708.110173] sd 2:0:56:0: [sdc] 11721045168 512-byte logical blocks:
(6.00 TB/5.46 TiB)
[26708.110173] sd 2:0:56:0: [sdc] 11721045168 512-byte logical blocks:
(6.00 TB/5.46 TiB)
[26708.135492] sd 2:0:56:0: [sdc] 4096-byte physical blocks
[26708.135492] sd 2:0:56:0: [sdc] 4096-byte physical blocks
[26708.209552] sd 2:0:56:0: [sdc] Write Protect is off
[26708.209552] sd 2:0:56:0: [sdc] Write Protect is off
[26708.236055] sd 2:0:56:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[26708.236055] sd 2:0:56:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[26708.615290] sd 2:0:56:0: [sdc] Attached SCSI disk
[26708.615290] sd 2:0:56:0: [sdc] Attached SCSI disk
[26718.256091] hisi_sas_v3_hw 0000:74:02.0: phydown: phy3 phy_state=0xf7
[26718.256091] hisi_sas_v3_hw 0000:74:02.0: phydown: phy3 phy_state=0xf7
[26718.451643] sd 2:0:49:0: [sdd] Synchronizing SCSI cache
[26718.451643] sd 2:0:49:0: [sdd] Synchronizing SCSI cache
[26718.489868] sd 2:0:49:0: [sdd] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26718.489868] sd 2:0:49:0: [sdd] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26718.520730] sd 2:0:49:0: [sdd] Stopping disk
[26718.520730] sd 2:0:49:0: [sdd] Stopping disk
[26718.537621] sd 2:0:49:0: [sdd] Start/Stop Unit failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26718.537621] sd 2:0:49:0: [sdd] Start/Stop Unit failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26718.727537] hisi_sas_v3_hw 0000:74:02.0: dev[3:5] is gone
[26718.727537] hisi_sas_v3_hw 0000:74:02.0: dev[3:5] is gone
[26729.780626] hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=8(sata)
[26729.780626] hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=8(sata)
[26729.840148] hisi_sas_v3_hw 0000:74:02.0: dev[3:5] found
[26729.840148] hisi_sas_v3_hw 0000:74:02.0: dev[3:5] found
[26730.099183] ata18.00: ATA-10: INTEL SSDSC2BB960G7, N2010101, max UDMA/133
[26730.099183] ata18.00: ATA-10: INTEL SSDSC2BB960G7, N2010101, max UDMA/133
[26730.118817] ata18.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth
31/32)
[26730.118817] ata18.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth
31/32)
[26730.163992] ata18.00: configured for UDMA/133
[26730.163992] ata18.00: configured for UDMA/133
[26730.368127] scsi 2:0:57:0: Direct-Access ATA INTEL
SSDSC2BB96 0101 PQ: 0 ANSI: 5
[26730.368127] scsi 2:0:57:0: Direct-Access ATA INTEL
SSDSC2BB96 0101 PQ: 0 ANSI: 5
[26730.485519] ata18.00: Enabling discard_zeroes_data
[26730.485519] ata18.00: Enabling discard_zeroes_data
[26730.562133] sd 2:0:57:0: [sdd] 1875385008 512-byte logical blocks:
(960 GB/894 GiB)
[26730.562133] sd 2:0:57:0: [sdd] 1875385008 512-byte logical blocks:
(960 GB/894 GiB)
[26730.586390] sd 2:0:57:0: [sdd] 4096-byte physical blocks
[26730.586390] sd 2:0:57:0: [sdd] 4096-byte physical blocks
[26730.624535] sd 2:0:57:0: [sdd] Write Protect is off
[26730.624535] sd 2:0:57:0: [sdd] Write Protect is off
[26730.655565] sd 2:0:57:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[26730.655565] sd 2:0:57:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[26730.758190] ata18.00: Enabling discard_zeroes_data
[26730.758190] ata18.00: Enabling discard_zeroes_data
[26730.965130] ata18.00: Enabling discard_zeroes_data
[26730.965130] ata18.00: Enabling discard_zeroes_data
[26731.035218] sd 2:0:57:0: [sdd] Attached SCSI disk
[26731.035218] sd 2:0:57:0: [sdd] Attached SCSI disk
[26741.033891] hisi_sas_v3_hw 0000:74:02.0: phydown: phy4 phy_state=0xef
[26741.033891] hisi_sas_v3_hw 0000:74:02.0: phydown: phy4 phy_state=0xef
[26741.262803] sd 2:0:50:0: [sde] Synchronizing SCSI cache
[26741.262803] sd 2:0:50:0: [sde] Synchronizing SCSI cache
[26741.291251] sd 2:0:50:0: [sde] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26741.291251] sd 2:0:50:0: [sde] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26741.452295] hisi_sas_v3_hw 0000:74:02.0: dev[4:1] is gone
[26741.452295] hisi_sas_v3_hw 0000:74:02.0: dev[4:1] is gone
--IPOP Time:12/3/2017_2:06:57--
[26752.519335] hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=8
[26752.519335] hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=8
[26752.603868] hisi_sas_v3_hw 0000:74:02.0: dev[4:1] found
[26752.603868] hisi_sas_v3_hw 0000:74:02.0: dev[4:1] found
[26752.761954] scsi 2:0:58:0: Direct-Access HGST HUC156060CS4200
A360 PQ: 0 ANSI: 6
[26752.761954] scsi 2:0:58:0: Direct-Access HGST HUC156060CS4200
A360 PQ: 0 ANSI: 6
[26753.016839] sd 2:0:58:0: [sde] 146515446 4096-byte logical blocks:
(600 GB/559 GiB)
[26753.016839] sd 2:0:58:0: [sde] 146515446 4096-byte logical blocks:
(600 GB/559 GiB)
[26753.060446] sd 2:0:58:0: [sde] Write Protect is off
[26753.060446] sd 2:0:58:0: [sde] Write Protect is off
[26753.112410] sd 2:0:58:0: [sde] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26753.112410] sd 2:0:58:0: [sde] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26754.048264] sd 2:0:58:0: [sde] Attached SCSI disk
[26754.048264] sd 2:0:58:0: [sde] Attached SCSI disk
[26763.914651] hisi_sas_v3_hw 0000:74:02.0: phydown: phy5 phy_state=0xdf
[26763.914651] hisi_sas_v3_hw 0000:74:02.0: phydown: phy5 phy_state=0xdf
[26764.123860] sd 2:0:51:0: [sdf] Synchronizing SCSI cache
[26764.123860] sd 2:0:51:0: [sdf] Synchronizing SCSI cache
[26764.160910] sd 2:0:51:0: [sdf] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26764.160910] sd 2:0:51:0: [sdf] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26764.349635] hisi_sas_v3_hw 0000:74:02.0: dev[5:1] is gone
[26764.349635] hisi_sas_v3_hw 0000:74:02.0: dev[5:1] is gone
[26775.341199] hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=8
[26775.341199] hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=8
[26775.417619] hisi_sas_v3_hw 0000:74:02.0: dev[5:1] found
[26775.417619] hisi_sas_v3_hw 0000:74:02.0: dev[5:1] found
[26775.571880] scsi 2:0:59:0: Direct-Access HITACHI HUC109090CSS600
A440 PQ: 0 ANSI: 6
[26775.571880] scsi 2:0:59:0: Direct-Access HITACHI HUC109090CSS600
A440 PQ: 0 ANSI: 6
[26775.797378] sd 2:0:59:0: [sdf] 1758174768 512-byte logical blocks:
(900 GB/838 GiB)
[26775.797378] sd 2:0:59:0: [sdf] 1758174768 512-byte logical blocks:
(900 GB/838 GiB)
[26775.835526] sd 2:0:59:0: [sdf] Write Protect is off
[26775.835526] sd 2:0:59:0: [sdf] Write Protect is off
[26775.892457] sd 2:0:59:0: [sdf] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26775.892457] sd 2:0:59:0: [sdf] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26776.788901] sd 2:0:59:0: [sdf] Attached SCSI disk
[26776.788901] sd 2:0:59:0: [sdf] Attached SCSI disk
[26786.638978] hisi_sas_v3_hw 0000:74:02.0: phydown: phy6 phy_state=0xbf
[26786.638978] hisi_sas_v3_hw 0000:74:02.0: phydown: phy6 phy_state=0xbf
[26786.868652] sd 2:0:52:0: [sdg] Synchronizing SCSI cache
[26786.868652] sd 2:0:52:0: [sdg] Synchronizing SCSI cache
[26786.905217] sd 2:0:52:0: [sdg] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26786.905217] sd 2:0:52:0: [sdg] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[26787.060205] hisi_sas_v3_hw 0000:74:02.0: dev[6:1] is gone
[26787.060205] hisi_sas_v3_hw 0000:74:02.0: dev[6:1] is gone
[26798.172445] hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=8
[26798.172445] hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=8
[26798.255947] hisi_sas_v3_hw 0000:74:02.0: dev[6:1] found
[26798.255947] hisi_sas_v3_hw 0000:74:02.0: dev[6:1] found
[26798.437811] scsi 2:0:60:0: Direct-Access SEAGATE ST300MM0008
N003 PQ: 0 ANSI: 6
[26798.437811] scsi 2:0:60:0: Direct-Access SEAGATE ST300MM0008
N003 PQ: 0 ANSI: 6
[26799.063474] sd 2:0:60:0: [sdg] 585937500 512-byte logical blocks:
(300 GB/279 GiB)
[26799.063474] sd 2:0:60:0: [sdg] 585937500 512-byte logical blocks:
(300 GB/279 GiB)
[26799.119535] sd 2:0:60:0: [sdg] Write Protect is off
[26799.119535] sd 2:0:60:0: [sdg] Write Protect is off
[26799.172090] sd 2:0:60:0: [sdg] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26799.172090] sd 2:0:60:0: [sdg] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[26799.760024] sd 2:0:60:0: [sdg] Attached SCSI disk
[26799.760024] sd 2:0:60:0: [sdg] Attached SCSI disk
[26809.413584] hisi_sas_v3_hw 0000:74:02.0: phydown: phy7 phy_state=0x7f
[26809.413584] hisi_sas_v3_hw 0000:74:02.0: phydown: phy7 phy_state=0x7f
[26809.631741] sd 2:0:53:0: [sdh] Synchronizing SCSI cache
[26809.631741] sd 2:0:53:0: [sdh] Synchronizing SCSI cache
prev parent reply other threads:[~2017-12-21 1:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 6:13 about warning in ata_eh_finish() Jason Yan
2017-12-20 17:36 ` Tejun Heo
2017-12-21 1:31 ` Jason Yan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5A3B0EE8.2060707@huawei.com \
--to=yanaijie@huawei.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.