KVM guest sometimes failed to boot because of kernel stack overflow if KPTI is enabled on a hisilicon ARM64 platform.

[xuwei5@hisilicon.com (Wei Xu)]

Hi Will,

On 2018/6/21 11:54, Will Deacon wrote:
> Hi Wei,
> 
> On Thu, Jun 21, 2018 at 11:14:28AM +0100, Wei Xu wrote:
>> On 2018/6/21 10:18, Will Deacon wrote:
>>> On Thu, Jun 21, 2018 at 09:38:53AM +0100, James Morse wrote:
>>>> On 20/06/18 17:25, Wei Xu wrote:
>>>>>     [    0.042421] Insufficient stack space to handle exception!
>>>>>     [    0.042423] ESR: 0x96000046 -- DABT (current EL)
>>>>>     [    0.043730] FAR: 0xffff0000093a80e0
>>>>>     [    0.044714] Task stack: [0xffff0000093a8000..0xffff0000093ac000]
>>>>
>>>> This was a level 2 translation fault on a write, to an address that is within
>>>> the stack....
>>>>
>>>>
>>>>>     [    0.051113] IRQ stack: [0xffff000008000000..0xffff000008004000]
>>>>>     [    0.057610] Overflow stack: [0xffff80003efce2f0..0xffff80003efcf2f0]
>>>>>     [    0.064003] CPU: 0 PID: 12 Comm: migration/0 Not tainted
>>>>> 4.17.0-45865-g2b31fe7-dirty #10
>>>>>     [    0.072201] Hardware name: linux,dummy-virt (DT)
>>>>
>>>>>     [    0.076797] pstate: 604003c5 (nZCv DAIF +PAN -UAO)
>>>>>     [    0.081727] pc : el1_sync+0x0/0xb0
>>>>
>>>> ... from the vectors.
>>>>
>>>>
>>>>>     [    0.085217] lr : kpti_install_ng_mappings+0x120/0x214
>>>>
>>>> What I think is happening is: we come out of the kpti idmap with the stack
>>>> unmapped. Shortly after we access the stack, which faults. el1_sync faults as
>>>> well when it tries to push the registers to the stack, and we keep going until
>>>> we overflow the stack.
>>>>
>>>> I can't reproduce this with kvmtool or qemu in the model.
>>>
>>> Hmm, one thing that occurs to me is that the kpti_install_ng_mappings()
>>> code leaves the nG bit set in table entries, which is actually IGNORED in
>>> the architecture.
>>>
>>> Wei -- does the diff below help at all? Make sure you disable CONFIG_KASAN,
>>> otherwise your kernel will take an age to boot.
>>
>> Yes, amazing! This patch resolved the issue.
> 
> Great...
> 
>> I have tested 50 times and can not reproduce the issue any more.
>> Could you please tell more why this patch works?
> 
> You might need to ask your CPU design team ;)
> 
> Without this patch, the code in idmap_kpti_install_ng_mappings() sets
> bit 11 in table descriptors so that we can keep track of which parts of
> the page table we've visited. With this patch, we don't bother tracking
> and potentially rewalk parts of the page table (which takes a very long
> time if KASAN is enabled).

Got it. Thanks!

> 
> The architecture documents I've looked at are clear that bit 11 is IGNORED
> by the CPU, which:
> 
>   "Indicates that the architecture guarantees that the bit or field is not
>    interpreted or modified by hardware."
> 
> Please can you double-check that your CPU is indeed ignoring bit 11 in
> non-leaf (table) descriptors?

Do the non-leaf(table) descriptors mean the table descriptors
of the section D4.3.1 "VMSAv8-64 translation table level 0, level 1, and level 2 descriptor formats"
in the ARM Architecture Reference Manual ARMv8 for ARMv8-A(DDI0487C_a_armv8_arm.pdf)?

If yes, our hardware does ignore it(not interpret or modify).

Is there any other possible reason cause this?
Thanks!

Best Regards,
Wei

> 
> Thanks,
> 
> Will
> 
> .
>