From: jerome lacoste <jerome.lacoste@gmail.com>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Marie-Helene Lacoste <manies@tele2.fr>
Subject: 2.6.12.3 clock drifting twice too fast (amd64)
Date: Tue, 16 Aug 2005 12:10:54 +0200 [thread overview]
Message-ID: <5a2cf1f6050816031011590972@mail.gmail.com> (raw)
Installed stock 2.6.12.3 on a brand new amd64 box with an Asus extreme
AX 300 SE/t mainboard.
I remember seeing a message in the boot saying something along:
"cannot connect to hardware clock."
And now I see that the time is changing too fast (about 2 seconds each second).
I don't have visual on the boot sequence anymore (only remote access).
Kernel earlier than 2.6.11 won't boot on the box (SATA chipset unsupported).
Some info below (probably irrelevant).
What should I try?
Linux manies 2.6.12.3 #1 Thu Jul 28 12:49:15 CEST 2005 x86_64 GNU/Linux
jerome@manies:~$ lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5951
0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34
0000:00:11.0 RAID bus controller: ATI Technologies Inc: Unknown device 437a
0000:00:12.0 RAID bus controller: ATI Technologies Inc: Unknown device 4379
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 04)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc:
Unknown device 4370
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:02:05.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
0000:02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
jerome@manies:~$ cat /proc/interrupts
CPU0
0: 22456064 IO-APIC-edge timer
1: 6175 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc
12: 241004 IO-APIC-edge i8042
14: 201574 IO-APIC-edge ide0
16: 23 IO-APIC-level bttv0
17: 370224 IO-APIC-level ATI IXP
19: 33 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
20: 221385 IO-APIC-level eth0
21: 0 IO-APIC-level acpi
22: 65322 IO-APIC-level libata
23: 0 IO-APIC-level libata
NMI: 9788
LOC: 11226651
ERR: 18
next reply other threads:[~2005-08-16 10:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-16 10:10 jerome lacoste [this message]
2005-08-16 18:05 ` 2.6.12.3 clock drifting twice too fast (amd64) Christoph Lameter
2005-08-16 21:15 ` jerome lacoste
2005-08-16 23:17 ` Jeff Mahoney
2005-08-17 6:48 ` yhlu
2005-08-17 13:20 ` Jeff Mahoney
2005-08-17 15:11 ` yhlu
2005-08-16 21:41 ` john stultz
2005-08-16 23:11 ` jerome lacoste
2006-02-06 17:02 ` jerome lacoste
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a2cf1f6050816031011590972@mail.gmail.com \
--to=jerome.lacoste@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manies@tele2.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.