From: Jeremy Fitzhardinge <jeremy@goop.org>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Yasunori Goto <y-goto@jp.fujitsu.com>,
Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>, LKML <linux-kernel@vger.kernel.org>,
Christoph Lameter <clameter@sgi.com>
Subject: [PATCH 1 of 6] hotplug-memory: refactor online_pages to separate zone growth from page onlining
Date: Thu, 03 Apr 2008 17:05:41 -0700 [thread overview]
Message-ID: <5a397e7f3c1aeb7648b9.1207267541@localhost> (raw)
In-Reply-To: <patchbomb.1207267540@localhost>
The Xen balloon driver needs to separate the process of hot-installing
memory into two phases: one to allocate the page structures and
configure the zones, and another to actually online the pages of newly
installed memory.
This patch splits up the innards of online_pages() into two pieces
which correspond to these two phases. The behaviour of online_pages()
itself is unchanged.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
---
include/linux/memory_hotplug.h | 3 +
mm/memory_hotplug.c | 102 ++++++++++++++++++++++++++--------------
2 files changed, 71 insertions(+), 34 deletions(-)
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -57,7 +57,10 @@
/* need some defines for these for archs that don't support it */
extern void online_page(struct page *page);
/* VM interface that may be used by firmware interface */
+extern int prepare_online_pages(unsigned long pfn, unsigned long nr_pages);
+extern unsigned long mark_pages_onlined(unsigned long pfn, unsigned long nr_pages);
extern int online_pages(unsigned long, unsigned long);
+
extern void __offline_isolated_pages(unsigned long, unsigned long);
extern int offline_pages(unsigned long, unsigned long, unsigned long);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -134,10 +134,32 @@
}
EXPORT_SYMBOL_GPL(__add_pages);
-static void grow_zone_span(struct zone *zone,
+static void grow_pgdat_span(struct pglist_data *pgdat,
unsigned long start_pfn, unsigned long end_pfn)
{
+ unsigned long old_pgdat_end_pfn =
+ pgdat->node_start_pfn + pgdat->node_spanned_pages;
+
+ if (start_pfn < pgdat->node_start_pfn)
+ pgdat->node_start_pfn = start_pfn;
+
+ pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
+ pgdat->node_start_pfn;
+}
+
+static void grow_zone_span(unsigned long start_pfn, unsigned long end_pfn)
+{
unsigned long old_zone_end_pfn;
+ struct zone *zone;
+ unsigned long flags;
+
+ /*
+ * This doesn't need a lock to do pfn_to_page().
+ * The section can't be removed here because of the
+ * memory_block->state_sem.
+ */
+ zone = page_zone(pfn_to_page(start_pfn));
+ pgdat_resize_lock(zone->zone_pgdat, &flags);
zone_span_writelock(zone);
@@ -149,19 +171,9 @@
zone->zone_start_pfn;
zone_span_writeunlock(zone);
-}
-static void grow_pgdat_span(struct pglist_data *pgdat,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- unsigned long old_pgdat_end_pfn =
- pgdat->node_start_pfn + pgdat->node_spanned_pages;
-
- if (start_pfn < pgdat->node_start_pfn)
- pgdat->node_start_pfn = start_pfn;
-
- pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
- pgdat->node_start_pfn;
+ grow_pgdat_span(zone->zone_pgdat, start_pfn, end_pfn);
+ pgdat_resize_unlock(zone->zone_pgdat, &flags);
}
static int online_pages_range(unsigned long start_pfn, unsigned long nr_pages,
@@ -180,16 +192,12 @@
return 0;
}
-
-int online_pages(unsigned long pfn, unsigned long nr_pages)
+/* Tell anyone who's interested that we're onlining some memory */
+static int notify_going_online(unsigned long pfn, unsigned long nr_pages)
{
- unsigned long flags;
- unsigned long onlined_pages = 0;
- struct zone *zone;
- int need_zonelists_rebuild = 0;
+ struct memory_notify arg;
int nid;
int ret;
- struct memory_notify arg;
arg.start_pfn = pfn;
arg.nr_pages = nr_pages;
@@ -201,20 +209,18 @@
ret = memory_notify(MEM_GOING_ONLINE, &arg);
ret = notifier_to_errno(ret);
- if (ret) {
+ if (ret)
memory_notify(MEM_CANCEL_ONLINE, &arg);
- return ret;
- }
- /*
- * This doesn't need a lock to do pfn_to_page().
- * The section can't be removed here because of the
- * memory_block->state_sem.
- */
- zone = page_zone(pfn_to_page(pfn));
- pgdat_resize_lock(zone->zone_pgdat, &flags);
- grow_zone_span(zone, pfn, pfn + nr_pages);
- grow_pgdat_span(zone->zone_pgdat, pfn, pfn + nr_pages);
- pgdat_resize_unlock(zone->zone_pgdat, &flags);
+
+ return ret;
+}
+
+/* Mark a set of pages as online */
+unsigned long mark_pages_onlined(unsigned long pfn, unsigned long nr_pages)
+{
+ struct zone *zone = page_zone(pfn_to_page(pfn));
+ unsigned long onlined_pages = 0;
+ int need_zonelists_rebuild = 0;
/*
* If this zone is not populated, then it is not in zonelist.
@@ -240,10 +246,38 @@
vm_total_pages = nr_free_pagecache_pages();
writeback_set_ratelimit();
- if (onlined_pages)
+ if (onlined_pages) {
+ struct memory_notify arg;
+
+ arg.start_pfn = pfn; /* ? */
+ arg.nr_pages = onlined_pages;
+ arg.status_change_nid = -1; /* ? */
+
memory_notify(MEM_ONLINE, &arg);
+ }
+ return onlined_pages;
+}
+
+int prepare_online_pages(unsigned long pfn, unsigned long nr_pages)
+{
+ int ret = notify_going_online(pfn, nr_pages);
+ if (ret)
+ return ret;
+
+ grow_zone_span(pfn, pfn+nr_pages);
return 0;
+}
+
+int online_pages(unsigned long pfn, unsigned long nr_pages)
+{
+ int ret;
+
+ ret = prepare_online_pages(pfn, nr_pages);
+ if (ret == 0)
+ mark_pages_onlined(pfn, nr_pages);
+
+ return ret;
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
next prev parent reply other threads:[~2008-04-04 0:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-04 0:05 [PATCH 0 of 6] [RFC] another attempt at making hotplug memory and xen play together Jeremy Fitzhardinge
2008-04-04 0:05 ` Jeremy Fitzhardinge [this message]
2008-04-04 1:06 ` [PATCH 1 of 6] hotplug-memory: refactor online_pages to separate zone growth from page onlining Dave Hansen
2008-04-04 1:20 ` Jeremy Fitzhardinge
2008-04-04 1:33 ` Dave Hansen
2008-04-04 1:09 ` Dave Hansen
2008-04-04 1:32 ` Jeremy Fitzhardinge
2008-04-04 1:41 ` Dave Hansen
2008-04-04 1:56 ` Yasunori Goto
2008-04-04 5:34 ` Jeremy Fitzhardinge
2008-04-04 0:05 ` [PATCH 2 of 6] xen: make phys_to_machine structure dynamic Jeremy Fitzhardinge
2008-04-04 0:05 ` [PATCH 3 of 6] xen-balloon: use memory hot-add to expand the domain's memory Jeremy Fitzhardinge
2008-04-04 0:05 ` [PATCH 4 of 6] hotplug-memory: use common online_page Jeremy Fitzhardinge
2008-04-04 0:47 ` Dave Hansen
2008-04-04 0:56 ` Jeremy Fitzhardinge
2008-04-04 1:00 ` Dave Hansen
2008-04-04 1:11 ` Jeremy Fitzhardinge
2008-04-04 1:22 ` Dave Hansen
2008-04-04 0:05 ` [PATCH 5 of 6] hotplug-memory: add section_ops Jeremy Fitzhardinge
2008-04-04 0:51 ` Dave Hansen
2008-04-04 1:12 ` Jeremy Fitzhardinge
2008-04-04 1:52 ` Dave Hansen
2008-04-04 5:32 ` Jeremy Fitzhardinge
2008-04-04 14:22 ` Dave Hansen
2008-04-04 18:21 ` Jeremy Fitzhardinge
2008-04-04 19:28 ` Christoph Lameter
2008-04-04 20:38 ` Jeremy Fitzhardinge
2008-04-04 1:47 ` KAMEZAWA Hiroyuki
2008-04-04 5:35 ` Jeremy Fitzhardinge
2008-04-04 0:05 ` [PATCH 6 of 6] xen-balloon: define a section_ops Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a397e7f3c1aeb7648b9.1207267541@localhost \
--to=jeremy@goop.org \
--cc=clameter@sgi.com \
--cc=dave@linux.vnet.ibm.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=y-goto@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.