From: Jan Kiszka <jan.kiszka@siemens.com>
To: Florian Bezdeka <florian.bezdeka@siemens.com>, xenomai@lists.linux.dev
Subject: Re: [PATCH 00/13] Migration to ARRAY_SIZE() and further include cleanups
Date: Thu, 7 Dec 2023 11:37:19 +0900 [thread overview]
Message-ID: <5c6e7f95-dccd-4ddd-840b-32ddb343adbd@siemens.com> (raw)
In-Reply-To: <20231201-flo-array-size-v1-0-3e0abd7c68fa@siemens.com>
On 05.12.23 20:41, Florian Bezdeka wrote:
> Hi all,
>
> Warning, this is high altitute work ;-). I had some time on my flight back
> from New Zealand, so review carefully.
>
Then let's only check this while doing something similar (on my route
back from Tokyo) :p
Jan
> Everything is compile tested and passed our internal CI already - as
> usual.
>
> I'm trying to address some comments / further cleanups mentioned by Jan
> during the last testsuite cleanup series.
>
> Best regards,
> Florian
>
> Signed-off-by: Florian Bezdeka <florian.bezdeka@siemens.com>
> ---
> Florian Bezdeka (13):
> testsuite: Migrate to ARRAY_SIZE()
> demo: Migrate to ARRAY_SIZE()
> lib: Migrate to ARRAY_SIZE()
> kernel/drivers: Mirate to ARRAY_SIZE()
> demo: Cleanup includes
> lib/alchemy: Cleanup includes
> lib/analogy: Cleanup includes
> lib/boilerplate: Cleanup includes
> lib/copperplate: Cleanup includes
> lib/psos: Cleanup includes
> lib/smokey: Cleanup includes
> lib/trank: Cleanup includes
> lib/vxworks: Cleanup includes
>
> demo/alchemy/altency.c | 2 +-
> demo/alchemy/cobalt/cross-link.c | 3 +--
> demo/posix/cobalt/bufp-label.c | 5 ++++-
> demo/posix/cobalt/bufp-readwrite.c | 5 ++++-
> demo/posix/cobalt/can-rtt.c | 2 --
> demo/posix/cobalt/eth_p_all.c | 2 --
> demo/posix/cobalt/gpiopwm.c | 3 ---
> demo/posix/cobalt/iddp-label.c | 5 ++++-
> demo/posix/cobalt/iddp-sendrecv.c | 5 ++++-
> demo/posix/cobalt/xddp-echo.c | 5 ++++-
> demo/posix/cobalt/xddp-label.c | 5 ++++-
> demo/posix/cobalt/xddp-stream.c | 5 ++++-
> demo/posix/cyclictest/cyclictest.c | 6 +++---
> include/smokey/smokey.h | 2 +-
> kernel/drivers/analogy/national_instruments/mio_common.c | 6 ++----
> kernel/drivers/analogy/national_instruments/ni_670x.c | 2 +-
> kernel/drivers/analogy/national_instruments/ni_stc.h | 4 ++--
> kernel/drivers/analogy/national_instruments/pcimio.c | 2 +-
> .../net/drivers/experimental/e1000/e1000_80003es2lan.c | 3 +--
> .../drivers/net/drivers/experimental/e1000/e1000_82541.c | 3 +--
> .../drivers/net/drivers/experimental/e1000/e1000_phy.c | 6 ++----
> kernel/drivers/net/drivers/igb/e1000_phy.c | 6 ++----
> lib/alchemy/alarm.c | 2 +-
> lib/alchemy/buffer.c | 2 +-
> lib/alchemy/cond.c | 2 +-
> lib/alchemy/event.c | 2 +-
> lib/alchemy/heap.c | 1 -
> lib/alchemy/init.c | 3 +--
> lib/alchemy/internal.c | 2 --
> lib/alchemy/mutex.c | 2 +-
> lib/alchemy/pipe.c | 3 ++-
> lib/alchemy/queue.c | 2 +-
> lib/alchemy/sem.c | 1 -
> lib/alchemy/task.c | 2 +-
> lib/analogy/calibration.c | 2 +-
> lib/analogy/descriptor.c | 1 -
> lib/analogy/math.c | 1 -
> lib/analogy/range.c | 1 -
> lib/boilerplate/ancillaries.c | 8 +++-----
> lib/boilerplate/avl.c | 1 +
> lib/boilerplate/debug.c | 7 ++-----
> lib/boilerplate/hash.c | 2 +-
> lib/boilerplate/heapmem.c | 5 ++---
> lib/boilerplate/iniparser/dictionary.c | 1 -
> lib/boilerplate/init/bootstrap.c | 1 +
> lib/boilerplate/setup.c | 7 +++----
> lib/boilerplate/time.c | 1 +
> lib/boilerplate/version.c | 1 +
> lib/cobalt/mutex.c | 2 +-
> lib/cobalt/sigshadow.c | 2 +-
> lib/copperplate/clockobj.c | 4 ----
> lib/copperplate/cluster.c | 3 ---
> lib/copperplate/eventobj.c | 2 --
> lib/copperplate/heapobj-heapmem.c | 7 +++++--
> lib/copperplate/init.c | 4 +---
> lib/copperplate/internal.c | 4 ++--
> lib/copperplate/syncobj.c | 2 --
> lib/copperplate/threadobj.c | 1 +
> lib/copperplate/traceobj.c | 1 +
> lib/psos/init.c | 8 ++------
> lib/psos/pt.c | 5 +----
> lib/psos/queue.c | 7 +------
> lib/psos/rn.c | 5 +----
> lib/psos/sem.c | 4 +---
> lib/psos/task.c | 5 +----
> lib/psos/tm.c | 3 ---
> lib/smokey/helpers.c | 1 +
> lib/smokey/init.c | 8 +++-----
> lib/trank/init.c | 1 +
> lib/trank/internal.c | 4 ++--
> lib/vxworks/errnoLib.c | 1 +
> lib/vxworks/init.c | 3 ++-
> lib/vxworks/kernLib.c | 1 +
> lib/vxworks/memPartLib.c | 1 +
> lib/vxworks/msgQLib.c | 1 +
> lib/vxworks/rngLib.c | 1 +
> lib/vxworks/semLib.c | 1 +
> lib/vxworks/sysLib.c | 4 ++--
> lib/vxworks/taskHookLib.c | 2 ++
> lib/vxworks/taskInfo.c | 1 +
> lib/vxworks/taskLib.c | 6 ------
> lib/vxworks/tickLib.c | 6 +-----
> lib/vxworks/wdLib.c | 1 +
> testsuite/smokey/alchemytests/mq-1.c | 3 ++-
> testsuite/smokey/alchemytests/mq-2.c | 3 ++-
> testsuite/smokey/net_common/server.c | 8 ++++----
> testsuite/smokey/net_common/setup.c | 2 +-
> testsuite/smokey/posix-select/posix-select.c | 4 ++--
> testsuite/smokey/vxworkstests/msgQ-1.c | 3 ++-
> testsuite/smokey/vxworkstests/msgQ-2.c | 3 ++-
> testsuite/switchtest/switchtest.c | 16 ++++++++--------
> 91 files changed, 136 insertions(+), 168 deletions(-)
> ---
> base-commit: ed69c34214f9fcf57b459e701ed4f65f6753bb8c
> change-id: 20231201-flo-array-size-f30df8dd25e9
>
> Best regards,
--
Siemens AG, Technology
Linux Expert Center
next prev parent reply other threads:[~2023-12-07 2:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 12:41 [PATCH 00/13] Migration to ARRAY_SIZE() and further include cleanups Florian Bezdeka
2023-12-05 12:41 ` [PATCH 01/13] testsuite: Migrate to ARRAY_SIZE() Florian Bezdeka
2023-12-05 12:41 ` [PATCH 02/13] demo: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 03/13] lib: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 04/13] kernel/drivers: Mirate " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 05/13] demo: Cleanup includes Florian Bezdeka
2023-12-05 12:41 ` [PATCH 06/13] lib/alchemy: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 07/13] lib/analogy: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 08/13] lib/boilerplate: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 09/13] lib/copperplate: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 10/13] lib/psos: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 11/13] lib/smokey: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 12/13] lib/trank: " Florian Bezdeka
2023-12-05 12:41 ` [PATCH 13/13] lib/vxworks: " Florian Bezdeka
2023-12-07 2:37 ` Jan Kiszka [this message]
2023-12-07 9:13 ` [PATCH 00/13] Migration to ARRAY_SIZE() and further include cleanups Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5c6e7f95-dccd-4ddd-840b-32ddb343adbd@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=florian.bezdeka@siemens.com \
--cc=xenomai@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.