Re: [PATCH V2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l

[Stephen Boyd <swboyd@chromium.org>]

Quoting Kiran Gunda (2019-11-04 21:21:49)
> Add the compatibles and PMIC ids for pm6150 and pm6150l PMICs
> found on SC7180 based platforms.
> 
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> ---
>  - Changes from V1:
>    Sorted the macros and compatibles.

I don't see anything sorted though.

> 
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt | 2 ++
>  drivers/mfd/qcom-spmi-pmic.c                             | 4 ++++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index 1437062..b5fc64e 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -32,6 +32,8 @@ Required properties:
>                     "qcom,pm8998",
>                     "qcom,pmi8998",
>                     "qcom,pm8005",
> +                  "qcom,pm6150",
> +                  "qcom,pm6150l",

And this looks badly tabbed or something?

>                     or generalized "qcom,spmi-pmic".
>  - reg:             Specifies the SPMI USID slave address for this device.
>                     For more information see:
> diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c
> index e8fe705..74b7980 100644
> --- a/drivers/mfd/qcom-spmi-pmic.c
> +++ b/drivers/mfd/qcom-spmi-pmic.c
> @@ -34,6 +34,8 @@
>  #define PM8998_SUBTYPE         0x14
>  #define PMI8998_SUBTYPE                0x15
>  #define PM8005_SUBTYPE         0x18
> +#define PM6150_SUBTYPE         0x28
> +#define PM6150L_SUBTYPE                0x27
>  
>  static const struct of_device_id pmic_spmi_id_table[] = {
>         { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
> @@ -53,6 +55,8 @@
>         { .compatible = "qcom,pm8998",    .data = (void *)PM8998_SUBTYPE },
>         { .compatible = "qcom,pmi8998",   .data = (void *)PMI8998_SUBTYPE },
>         { .compatible = "qcom,pm8005",    .data = (void *)PM8005_SUBTYPE },
> +       { .compatible = "qcom,pm6150",    .data = (void *)PM6150_SUBTYPE },
> +       { .compatible = "qcom,pm6150l",   .data = (void *)PM6150L_SUBTYPE },
>         { }
>  };
>