All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Gupta, Nipun" <nipun.gupta@amd.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	linux-kernel@vger.kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, derek.kiernan@amd.com,
	dragan.cvetic@amd.com, arnd@arndb.de, gregkh@linuxfoundation.org
Cc: praveen.jain@amd.com, harpreet.anand@amd.com,
	nikhil.agarwal@amd.com, srivatsa@csail.mit.edu, code@tyhicks.com,
	ptsm@linux.microsoft.com
Subject: Re: [RFC PATCH 1/2] drivers/misc: add silex multipk driver
Date: Thu, 13 Mar 2025 15:07:09 +0530	[thread overview]
Message-ID: <5e45bf5c-4035-08fe-ef6d-e030941e98e9@amd.com> (raw)
In-Reply-To: <51ed5660-10fe-4a6f-ad99-9741187341b1@kernel.org>



On 12-03-2025 16:24, Krzysztof Kozlowski wrote:
> On 12/03/2025 10:54, Nipun Gupta wrote:
>> +
>>   SILICON LABS WIRELESS DRIVERS (for WFxxx series)
>>   M:	Jérôme Pouiller <jerome.pouiller@silabs.com>
>>   S:	Supported
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 56bc72c7ce4a..8c5c72c540a6 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -632,6 +632,12 @@ config MCHP_LAN966X_PCI
>>   	    - lan966x-miim (MDIO_MSCC_MIIM)
>>   	    - lan966x-switch (LAN966X_SWITCH)
>>
>> +config SILEX_MPK
>> +	tristate "Silex MultiPK driver"
>> +	depends on OF
> 
> Why can't this be compile tested?

yes will add the COMPILE_TEST

> 
> Which arch uses it? Which hardware?

It is supported on ARM. Will add ARM64 as dependent. It is supported on 
AMD versal series devices.

> 
>> +	help
>> +	  Enable Silex MultiPK support
>> +
>>   source "drivers/misc/c2port/Kconfig"
>>   source "drivers/misc/eeprom/Kconfig"
>>   source "drivers/misc/cb710/Kconfig"
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 545aad06d088..456758b29f71 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -75,3 +75,4 @@ lan966x-pci-objs		:= lan966x_pci.o
>>   lan966x-pci-objs		+= lan966x_pci.dtbo.o
>>   obj-$(CONFIG_MCHP_LAN966X_PCI)	+= lan966x-pci.o
>>   obj-y				+= keba/
>> +obj-$(CONFIG_SILEX_MPK)		+= silex_mpk.o
>> diff --git a/drivers/misc/silex_mpk.c b/drivers/misc/silex_mpk.c
>> new file mode 100644
>> index 000000000000..e03579780761
>> --- /dev/null
>> +++ b/drivers/misc/silex_mpk.c
>> @@ -0,0 +1,860 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2018-2021 Silex Insight sa
>> + * Copyright (c) 2018-2021 Beerten Engineering scs
>> + * Copyright (c) 2025 Advanced Micro Devices, Inc.
>> + */
>> +
>> +#include <linux/version.h>
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/device.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/slab.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/of.h>
> 
> Drop, won't be needed.
> 
>> +#include <linux/of_platform.h>
> 
> Where do you use it?
> 
> 
>> +#include <linux/of_address.h>
> 
> Where do you use it?

Sure will drop unused include files.

> 
>> +#include <linux/cdev.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/io.h>
>> +#include <linux/idr.h>
>> +#include <linux/atomic.h>
>> +#include <linux/delay.h>
>> +#include <linux/eventfd.h>
>> +#include <linux/kthread.h>
>> +#include <linux/sched/signal.h>
>> +#include <linux/bitops.h>
>> +#include <uapi/linux/eventpoll.h>
>> +#include <uapi/misc/silex_mpk.h>
>> +
>> +#include "silex_mpk_defs.h"
> 
> 
> ...
> 
>> +
>> +static int multipk_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct multipk_dev *mpkdev;
>> +	struct resource *memres;
>> +	int irq, ret;
>> +
>> +	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	mpkdev = devm_kzalloc(dev, sizeof(*mpkdev), GFP_KERNEL);
>> +	if (!mpkdev)
>> +		return -ENOMEM;
>> +	mpkdev->dev = dev;
>> +
>> +	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	mpkdev->regs = devm_ioremap_resource(dev, memres);
> 
> Use wrapper for both.
> 
> 
>> +	if (IS_ERR(mpkdev->regs))
>> +		return PTR_ERR(mpkdev->regs);
>> +	mpkdev->regsphys = memres->start;
>> +	memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> +	mpkdev->dbrg_regs = devm_ioremap_resource(dev, memres);
> 
> Use wrapper for both.

Will add a wrapper function.

> 
> 
>> +	if (IS_ERR(mpkdev->dbrg_regs))
>> +		return PTR_ERR(mpkdev->dbrg_regs);
>> +	mpkdev->dbrg_regsphys = memres->start;
>> +	platform_set_drvdata(pdev, mpkdev);
>> +
>> +	/* Only a single IRQ is supported */
>> +	if (platform_irq_count(pdev) != 1)
>> +		return -ENODEV;
>> +
>> +	irq = platform_get_irq(pdev, 0);
>> +	if (irq < 0)
>> +		return -ENODEV;
>> +
>> +	return multipk_create_device(mpkdev, dev, irq);
>> +}
>> +
>> +static void multipk_remove(struct platform_device *pdev)
>> +{
>> +	struct multipk_dev *mpkdev = platform_get_drvdata(pdev);
>> +
>> +	multipk_remove_device(mpkdev);
>> +}
>> +
>> +static const struct of_device_id multipk_match[] = {
>> +	{ .compatible = "multipk" },
> 
> NAK, you do not have such compatible.

I will update to use xlnx/multipk as per the device tree (and yaml)

> 
>> +	{ },
>> +};
>> +
>> +static struct platform_driver multipk_pdrv = {
>> +	.probe = multipk_probe,
>> +	.remove = multipk_remove,
>> +	.driver = {
>> +		.name = DRIVER_NAME,
>> +		.of_match_table = of_match_ptr(multipk_match),
> 
> Drop of_match_ptr, you have warnings here.

Sure will drop.

> 
>> +	},
>> +};
>> +
>> +static int __init multipk_init(void)
>> +{
>> +	dev_t devt;
>> +	int ret;
>> +
>> +	multipk_class = class_create("multipk");
>> +	if (IS_ERR(multipk_class)) {
>> +		ret = PTR_ERR(multipk_class);
>> +		pr_err("can't register class\n");
>> +		goto err;
>> +	}
>> +	ret = alloc_chrdev_region(&devt, 0, MULTIPK_MAX_DEVICES, "multipk");
>> +	if (ret) {
>> +		pr_err("can't register character device\n");
>> +		goto err_class;
>> +	}
>> +	multipk_major = MAJOR(devt);
>> +	multipk_minor = MINOR(devt);
>> +
>> +	ret = platform_driver_register(&multipk_pdrv);
>> +	if (ret) {
>> +		pr_err("can't register platform driver\n");
>> +		goto err_unchr;
>> +	}
>> +
>> +	return 0;
>> +err_unchr:
>> +	unregister_chrdev_region(devt, MULTIPK_MAX_DEVICES);
>> +err_class:
>> +	class_destroy(multipk_class);
>> +err:
>> +	return ret;
>> +}
>> +
>> +static void __exit multipk_exit(void)
>> +{
>> +	platform_driver_unregister(&multipk_pdrv);
>> +
>> +	unregister_chrdev_region(MKDEV(multipk_major, 0), MULTIPK_MAX_DEVICES);
>> +
>> +	class_destroy(multipk_class);
>> +}
>> +
>> +module_init(multipk_init);
>> +module_exit(multipk_exit);
> 
> I don't understand why loading a standard driver creates all this on my
> device.

Will move it to probe rather than driver init.

> 
>> +
>> +MODULE_DESCRIPTION("Driver for Silex Multipk Asymmetric crypto accelerator");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:" DRIVER_NAME);
> Drop

Okay.

Thanks,
Nipun

> 
> Best regards,
> Krzysztof

  reply	other threads:[~2025-03-13  9:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-12  9:54 [RFC PATCH 1/2] drivers/misc: add silex multipk driver Nipun Gupta
2025-03-12  9:54 ` [RFC PATCH 2/2] dt-bindings: add device tree binding for silex multipk Nipun Gupta
2025-03-12 10:51   ` Krzysztof Kozlowski
2025-03-13  9:25     ` Gupta, Nipun
2025-03-13  9:38       ` Krzysztof Kozlowski
2025-03-13  9:43       ` Greg KH
2025-03-12 10:15 ` [RFC PATCH 1/2] drivers/misc: add silex multipk driver Greg KH
2025-03-12 10:18 ` Greg KH
2025-03-13  9:16   ` Gupta, Nipun
2025-03-13  9:41     ` Greg KH
2025-03-12 10:54 ` Krzysztof Kozlowski
2025-03-13  9:37   ` Gupta, Nipun [this message]
2025-03-13 11:47 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5e45bf5c-4035-08fe-ef6d-e030941e98e9@amd.com \
    --to=nipun.gupta@amd.com \
    --cc=arnd@arndb.de \
    --cc=code@tyhicks.com \
    --cc=conor+dt@kernel.org \
    --cc=derek.kiernan@amd.com \
    --cc=dragan.cvetic@amd.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=harpreet.anand@amd.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nikhil.agarwal@amd.com \
    --cc=praveen.jain@amd.com \
    --cc=ptsm@linux.microsoft.com \
    --cc=robh@kernel.org \
    --cc=srivatsa@csail.mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.