From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002117]: No 5.1-support für VIA8237x/1617 based soundsystems (i.e. VIA EPIA SP8000-Board)
Date: Fri, 26 May 2006 14:49:31 +0200 [thread overview]
Message-ID: <5eeab5877a10a33e0e0068c618033516@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2117>
======================================================================
Reported By: Flipsen1977
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2117
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.15
======================================================================
Date Submitted: 05-12-2006 09:42 CEST
Last Modified: 05-26-2006 14:49 CEST
======================================================================
Summary: No 5.1-support für VIA8237x/1617 based soundsystems
(i.e. VIA EPIA SP8000-Board)
Description:
I've installed the latest via82xx-module, 2-channel works fine, but
6-channel isn't available at all.
alsamixer shows all the channels, they are unmuted und up at 90-100%, but
center/lfe und rear speakers don't work. I've been missing an opportunity
to switch the line-in and mic-in to output. As I read in some articles
there isn't yet support for this chipset.
Is there already something done?
======================================================================
----------------------------------------------------------------------
doobedoobedo - 05-26-06 02:45
----------------------------------------------------------------------
I have a VIA EPIA SP1300 (same board different processor) and have exactly
the same problem.
----------------------------------------------------------------------
tiwai - 05-26-06 14:49
----------------------------------------------------------------------
Please attach the generated file after "alsactl -f somefile store" and the
contents of /proc/asound/card0/codec#0/* files.
The former contains the current mixer status, so you can check whether
"Surround", "Center" and "LFE" are properly unmuted/adjusted.
I have no datasheet for VT1617A. So, it's a bit hard to track down.
Issue History
Date Modified Username Field Change
======================================================================
05-12-06 09:42 Flipsen1977 New Issue
05-12-06 09:42 Flipsen1977 Distribution => Debian
05-12-06 09:42 Flipsen1977 Kernel Version => 2.6.15
05-12-06 16:03 tiwai Note Added: 0009775
05-15-06 14:27 Flipsen1977 Note Added: 0009823
05-15-06 22:17 Flipsen1977 Note Edited: 0009823
05-26-06 02:45 doobedoobedo Note Added: 0009970
05-26-06 14:49 tiwai Note Added: 0009977
======================================================================
next reply other threads:[~2006-05-26 12:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-26 12:49 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-05-30 9:51 [ALSA - driver 0002117]: No 5.1-support für VIA8237x/1617 based soundsystems (i.e. VIA EPIA SP8000-Board) bugtrack
2006-05-26 18:56 bugtrack
2006-05-26 0:45 bugtrack
2006-05-15 12:27 bugtrack
2006-05-12 14:03 bugtrack
2006-05-12 7:42 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5eeab5877a10a33e0e0068c618033516@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.