From: Reinette Chatre <reinette.chatre@intel.com>
To: Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
"Peter Newman" <peternewman@google.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>, <x86@kernel.org>
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>,
James Morse <james.morse@arm.com>,
Jamie Iles <quic_jiles@quicinc.com>,
Babu Moger <babu.moger@amd.com>,
Randy Dunlap <rdunlap@infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<patches@lists.linux.dev>
Subject: Re: [PATCH v5 3/8] x86/resctrl: Split the rdt_domain structure
Date: Mon, 25 Sep 2023 16:25:15 -0700 [thread overview]
Message-ID: <5f1256d3-737e-a447-abbe-f541767b2c8f@intel.com> (raw)
In-Reply-To: <20230829234426.64421-4-tony.luck@intel.com>
Hi Tony,
Subject:
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
On 8/29/2023 4:44 PM, Tony Luck wrote:
> The same rdt_domain structure is used for both control an monitor
"control an monitor" -> "control and monitor"
> functions. But this results in wasted memory as some of the fields
> are only used by control functions, while most are only used for monitor
> functions.
>
> Create a new rdt_mondomain structure tailored explicitly for use in
> monitor parts of the core. Slim down the rdt_domain structure by
> removing the unused monitor fields.
>
Similar to the previous patch I think it will make the code
easier to understand if the naming is clear for both
monitoring and control structured. Why not rdt_mondomain
and rdt_ctrldomain instead?
> Similar breakout of struct rdt_hw_mondomain from struct rdt_hw_domain.
rdt_hw_mondomain and rdt_hw_ctrldomain?
>
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> ---
> include/linux/resctrl.h | 46 +++++++++++++++--------
> arch/x86/kernel/cpu/resctrl/internal.h | 38 +++++++++++++------
> arch/x86/kernel/cpu/resctrl/core.c | 18 ++++-----
> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 4 +-
> arch/x86/kernel/cpu/resctrl/monitor.c | 40 ++++++++++----------
> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 24 ++++++------
> 6 files changed, 101 insertions(+), 69 deletions(-)
>
> diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
> index 33856943a787..08382548571e 100644
> --- a/include/linux/resctrl.h
> +++ b/include/linux/resctrl.h
> @@ -53,7 +53,29 @@ struct resctrl_staged_config {
> };
>
> /**
> - * struct rdt_domain - group of CPUs sharing a resctrl resource
> + * struct rdt_domain - group of CPUs sharing a resctrl control resource
> + * @list: all instances of this resource
> + * @id: unique id for this instance
> + * @cpu_mask: which CPUs share this resource
> + * @plr: pseudo-locked region (if any) associated with domain
> + * @staged_config: parsed configuration to be applied
> + * @mbps_val: When mba_sc is enabled, this holds the array of user
> + * specified control values for mba_sc in MBps, indexed
> + * by closid
> + */
> +struct rdt_domain {
> + // First three fields must match struct rdt_mondomain below.
Please avoid comments within declarations. Even so, could you please
elaborate what the above means? Why do the first three fields have to
match? I understand there is common code, for example, __rdt_find_domain()
that operated on the same members of the two structs but does that
require the members be in the same position in the struct?
I understand that a comment may be required if position in the struct
is important but I cannot see that it is.
> + struct list_head list;
> + int id;
> + struct cpumask cpu_mask;
> +
> + struct pseudo_lock_region *plr;
> + struct resctrl_staged_config staged_config[CDP_NUM_TYPES];
> + u32 *mbps_val;
> +};
> +
> +/**
> + * struct rdt_mondomain - group of CPUs sharing a resctrl monitor resource
> * @list: all instances of this resource
> * @id: unique id for this instance
> * @cpu_mask: which CPUs share this resource
> @@ -64,16 +86,13 @@ struct resctrl_staged_config {
> * @cqm_limbo: worker to periodically read CQM h/w counters
> * @mbm_work_cpu: worker CPU for MBM h/w counters
> * @cqm_work_cpu: worker CPU for CQM h/w counters
> - * @plr: pseudo-locked region (if any) associated with domain
> - * @staged_config: parsed configuration to be applied
> - * @mbps_val: When mba_sc is enabled, this holds the array of user
> - * specified control values for mba_sc in MBps, indexed
> - * by closid
> */
> -struct rdt_domain {
> +struct rdt_mondomain {
> + // First three fields must match struct rdt_domain above.
Same comment.
> struct list_head list;
> int id;
> struct cpumask cpu_mask;
> +
> unsigned long *rmid_busy_llc;
> struct mbm_state *mbm_total;
> struct mbm_state *mbm_local;
> @@ -81,9 +100,6 @@ struct rdt_domain {
> struct delayed_work cqm_limbo;
> int mbm_work_cpu;
> int cqm_work_cpu;
> - struct pseudo_lock_region *plr;
> - struct resctrl_staged_config staged_config[CDP_NUM_TYPES];
> - u32 *mbps_val;
> };
>
> /**
...
> diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> index 468c1815edfd..5167ac9cbe98 100644
> --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> @@ -521,7 +521,7 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
> }
>
> void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
> - struct rdt_domain *d, struct rdtgroup *rdtgrp,
> + struct rdt_mondomain *d, struct rdtgroup *rdtgrp,
> int evtid, int first)
> {
> /*
> @@ -544,7 +544,7 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg)
> struct rdtgroup *rdtgrp;
> struct rdt_resource *r;
> union mon_data_bits md;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
Reverse fir order.
> struct rmid_read rr;
> int ret = 0;
>
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index 66beca785535..42262d59ef9b 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -170,7 +170,7 @@ static int __rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val)
> return 0;
> }
>
> -static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
> +static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_mondomain *hw_dom,
> u32 rmid,
> enum resctrl_event_id eventid)
> {
> @@ -189,10 +189,10 @@ static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
> return NULL;
> }
>
> -void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
> +void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_mondomain *d,
> u32 rmid, enum resctrl_event_id eventid)
> {
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_dom = resctrl_to_arch_mondom(d);
> struct arch_mbm_state *am;
>
> am = get_arch_mbm_state(hw_dom, rmid, eventid);
> @@ -208,9 +208,9 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
> * Assumes that hardware counters are also reset and thus that there is
> * no need to record initial non-zero counts.
> */
> -void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_domain *d)
> +void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_mondomain *d)
> {
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_dom = resctrl_to_arch_mondom(d);
>
> if (is_mbm_total_enabled())
> memset(hw_dom->arch_mbm_total, 0,
> @@ -229,11 +229,11 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
> return chunks >> shift;
> }
>
> -int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> +int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mondomain *d,
> u32 rmid, enum resctrl_event_id eventid, u64 *val)
> {
> struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_mondom = resctrl_to_arch_mondom(d);
Reverse fir.
> struct arch_mbm_state *am;
> u64 msr_val, chunks;
> int ret;
> @@ -245,7 +245,7 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> if (ret)
> return ret;
>
> - am = get_arch_mbm_state(hw_dom, rmid, eventid);
> + am = get_arch_mbm_state(hw_mondom, rmid, eventid);
> if (am) {
> am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
> hw_res->mbm_width);
> @@ -266,7 +266,7 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> * decrement the count. If the busy count gets to zero on an RMID, we
> * free the RMID
> */
> -void __check_limbo(struct rdt_domain *d, bool force_free)
> +void __check_limbo(struct rdt_mondomain *d, bool force_free)
> {
> struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> struct rmid_entry *entry;
> @@ -305,7 +305,7 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
> }
> }
>
> -bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d)
> +bool has_busy_rmid(struct rdt_resource *r, struct rdt_mondomain *d)
> {
> return find_first_bit(d->rmid_busy_llc, r->num_rmid) != r->num_rmid;
> }
> @@ -334,7 +334,7 @@ int alloc_rmid(void)
> static void add_rmid_to_limbo(struct rmid_entry *entry)
> {
> struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
> int cpu, err;
> u64 val = 0;
>
> @@ -383,7 +383,7 @@ void free_rmid(u32 rmid)
> list_add_tail(&entry->list, &rmid_free_lru);
> }
>
> -static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 rmid,
> +static struct mbm_state *get_mbm_state(struct rdt_mondomain *d, u32 rmid,
> enum resctrl_event_id evtid)
> {
> switch (evtid) {
> @@ -516,7 +516,7 @@ void mon_event_count(void *info)
> * throttle MSRs already have low percentage values. To avoid
> * unnecessarily restricting such rdtgroups, we also increase the bandwidth.
> */
> -static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
> +static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_mondomain *dom_mbm)
> {
> u32 closid, rmid, cur_msr_val, new_msr_val;
> struct mbm_state *pmbm_data, *cmbm_data;
> @@ -600,7 +600,7 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
> }
> }
>
> -static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
> +static void mbm_update(struct rdt_resource *r, struct rdt_mondomain *d, int rmid)
> {
> struct rmid_read rr;
>
> @@ -641,12 +641,12 @@ void cqm_handle_limbo(struct work_struct *work)
> unsigned long delay = msecs_to_jiffies(CQM_LIMBOCHECK_INTERVAL);
> int cpu = smp_processor_id();
> struct rdt_resource *r;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
Reverse fir (Please check all code).
Reinette
next prev parent reply other threads:[~2023-09-25 23:25 UTC|newest]
Thread overview: 331+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-13 16:31 [PATCH v3 0/8] x86/resctrl: Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-07-13 16:32 ` [PATCH v3 1/8] x86/resctrl: Refactor in preparation for node-scoped resources Tony Luck
2023-07-18 20:36 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 2/8] x86/resctrl: Remove hard code of RDT_RESOURCE_L3 in monitor.c Tony Luck
2023-07-18 20:37 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 3/8] x86/resctrl: Add a new node-scoped resource to rdt_resources_all[] Tony Luck
2023-07-18 20:40 ` Reinette Chatre
2023-07-18 22:57 ` Tony Luck
2023-07-18 23:45 ` Reinette Chatre
2023-07-19 0:11 ` Luck, Tony
2023-07-20 17:27 ` Reinette Chatre
2023-07-20 0:20 ` Tony Luck
2023-07-20 17:27 ` Reinette Chatre
2023-07-20 21:56 ` Luck, Tony
2023-07-22 19:18 ` Tony Luck
2023-07-13 16:32 ` [PATCH v3 4/8] x86/resctrl: Add code to setup monitoring at L3 or NODE scope Tony Luck
2023-07-18 20:42 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 5/8] x86/resctrl: Add package scoped resource Tony Luck
2023-07-18 20:43 ` Reinette Chatre
2023-07-18 23:05 ` Tony Luck
2023-07-13 16:32 ` [PATCH v3 6/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-07-13 16:32 ` [PATCH v3 7/8] x86/resctrl: Determine if Sub-NUMA Cluster is enabled and initialize Tony Luck
2023-07-18 20:45 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 8/8] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-07-19 2:43 ` [PATCH v3 0/8] x86/resctrl: Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-07-22 20:21 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 0/7] " Tony Luck
2023-07-22 19:07 ` [PATCH v4 1/7] x86/resctrl: Create separate domains for control and monitoring Tony Luck
2023-08-11 17:29 ` Reinette Chatre
2023-08-25 17:05 ` Tony Luck
2023-08-28 17:05 ` Reinette Chatre
2023-08-28 18:46 ` Tony Luck
2023-08-28 19:56 ` Reinette Chatre
2023-08-28 20:59 ` Tony Luck
2023-08-28 21:20 ` Reinette Chatre
2023-08-28 22:12 ` Tony Luck
2023-08-29 0:31 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 2/7] x86/resctrl: Split the rdt_domain structures Tony Luck
2023-07-22 19:07 ` [PATCH v4 3/7] x86/resctrl: Change monitor code to use rdt_mondomain Tony Luck
2023-08-11 17:30 ` Reinette Chatre
2023-08-25 17:13 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 4/7] x86/resctrl: Delete unused fields from struct rdt_domain Tony Luck
2023-08-11 17:30 ` Reinette Chatre
2023-08-25 17:13 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 5/7] x86/resctrl: Determine if Sub-NUMA Cluster is enabled and initialize Tony Luck
2023-08-11 17:32 ` Reinette Chatre
2023-08-25 17:49 ` Tony Luck
2023-08-28 17:05 ` Reinette Chatre
2023-08-28 19:01 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 6/7] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-08-11 17:33 ` Reinette Chatre
2023-08-25 17:50 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 7/7] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-08-11 17:33 ` Reinette Chatre
2023-08-25 17:56 ` Tony Luck
2023-08-28 17:06 ` Reinette Chatre
2023-08-28 19:06 ` Tony Luck
2023-07-26 3:10 ` [PATCH v4 0/7] Add support for Sub-NUMA cluster (SNC) systems Drew Fustini
2023-07-26 14:10 ` Tony Luck
2023-08-11 17:27 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 0/8] " Tony Luck
2023-08-29 23:44 ` [PATCH v5 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-08-30 8:53 ` Maciej Wieczór-Retman
2023-08-30 14:11 ` Luck, Tony
2023-08-31 13:02 ` Maciej Wieczór-Retman
2023-08-31 17:26 ` Luck, Tony
2023-09-25 23:22 ` Reinette Chatre
2023-09-26 0:56 ` Tony Luck
2023-09-26 15:19 ` Reinette Chatre
2023-09-26 16:36 ` Moger, Babu
2023-09-26 17:18 ` Luck, Tony
2023-08-29 23:44 ` [PATCH v5 2/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-09-25 23:24 ` Reinette Chatre
2023-09-28 17:21 ` Tony Luck
2023-09-26 16:54 ` Moger, Babu
2023-09-26 17:45 ` Luck, Tony
2023-08-29 23:44 ` [PATCH v5 3/8] x86/resctrl: Split the rdt_domain structure Tony Luck
2023-09-25 23:25 ` Reinette Chatre [this message]
2023-09-26 18:46 ` Tony Luck
2023-09-26 22:00 ` Reinette Chatre
2023-09-26 22:14 ` Luck, Tony
2023-09-26 23:06 ` Reinette Chatre
2023-09-27 0:00 ` Luck, Tony
2023-09-27 15:22 ` Reinette Chatre
2023-09-28 17:33 ` Tony Luck
2023-09-28 18:42 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 4/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-09-25 23:25 ` Reinette Chatre
2023-09-28 17:42 ` Tony Luck
2023-09-28 18:44 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 5/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-09-25 23:27 ` Reinette Chatre
2023-09-28 17:48 ` Tony Luck
2023-08-29 23:44 ` [PATCH v5 6/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-09-25 23:29 ` Reinette Chatre
2023-09-28 18:12 ` Tony Luck
2023-09-28 18:44 ` Reinette Chatre
2023-09-26 19:16 ` Moger, Babu
2023-09-26 19:40 ` Luck, Tony
2023-09-26 19:48 ` Moger, Babu
2023-09-26 20:02 ` Luck, Tony
2023-09-26 20:18 ` Moger, Babu
2023-09-26 21:03 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 7/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-09-25 23:30 ` Reinette Chatre
2023-09-28 18:15 ` Tony Luck
2023-09-26 19:00 ` Moger, Babu
2023-09-26 19:11 ` Luck, Tony
2023-09-26 19:26 ` Moger, Babu
2023-09-26 19:43 ` Luck, Tony
2023-09-26 19:52 ` Moger, Babu
2023-08-29 23:44 ` [PATCH v5 8/8] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-08-30 13:08 ` Maciej Wieczór-Retman
2023-08-30 15:43 ` Luck, Tony
2023-08-31 6:51 ` Maciej Wieczór-Retman
2023-08-31 17:04 ` Luck, Tony
2023-09-07 5:21 ` Shaopeng Tan (Fujitsu)
2023-09-07 16:19 ` Luck, Tony
2023-09-19 6:50 ` Maciej Wieczór-Retman
2023-09-19 14:36 ` Luck, Tony
2023-09-20 6:06 ` Maciej Wieczór-Retman
2023-09-20 15:00 ` Luck, Tony
2023-09-11 20:23 ` [PATCH v5 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2023-09-12 16:01 ` Tony Luck
2023-09-12 17:13 ` Reinette Chatre
2023-09-12 17:45 ` Tony Luck
2023-09-12 18:31 ` Reinette Chatre
2023-09-28 19:13 ` [PATCH v6 " Tony Luck
2023-09-28 19:13 ` [PATCH v6 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-09-29 12:09 ` Peter Newman
2023-09-29 18:38 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-09-29 12:19 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-09-29 13:10 ` Peter Newman
2023-09-29 19:15 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-09-29 13:44 ` Peter Newman
2023-09-29 20:06 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-09-29 14:21 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-09-29 14:21 ` Peter Newman
2023-09-29 20:18 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-09-29 14:32 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-09-29 14:54 ` Peter Newman
2023-09-29 20:51 ` Tony Luck
2023-09-29 14:33 ` [PATCH v6 0/8] Add support for Sub-NUMA cluster (SNC) systems Peter Newman
2023-09-29 21:06 ` Tony Luck
2023-10-03 16:07 ` [PATCH v7 " Tony Luck
2023-10-03 16:07 ` [PATCH v7 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-03 16:07 ` [PATCH v7 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-03 16:07 ` [PATCH v7 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-03 16:07 ` [PATCH v7 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-03 16:46 ` Luck, Tony
2023-10-03 16:07 ` [PATCH v7 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-03 16:07 ` [PATCH v7 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-03 16:07 ` [PATCH v7 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-03 16:07 ` [PATCH v7 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-03 16:16 ` [PATCH v7 0/8] Add support for Sub-NUMA cluster (SNC) systems Luck, Tony
2023-10-03 16:34 ` Reinette Chatre
2023-10-03 21:30 ` [PATCH v8 " Tony Luck
2023-10-03 21:30 ` [PATCH v8 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-05 14:27 ` Peter Newman
2023-10-03 21:30 ` [PATCH v8 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-03 21:30 ` [PATCH v8 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-05 14:34 ` Peter Newman
2023-10-03 21:30 ` [PATCH v8 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-03 21:30 ` [PATCH v8 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-03 21:30 ` [PATCH v8 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-03 21:30 ` [PATCH v8 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-03 21:30 ` [PATCH v8 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-05 13:54 ` Peter Newman
2023-10-03 21:44 ` [PATCH v8 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2023-10-05 8:10 ` Shaopeng Tan (Fujitsu)
2023-10-05 15:08 ` Luck, Tony
2023-10-06 20:27 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 " Tony Luck
2023-10-20 21:30 ` [PATCH v9 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-30 21:18 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-30 21:19 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-30 21:21 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-30 21:21 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-20 21:30 ` [PATCH v9 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-30 21:22 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-30 21:23 ` Reinette Chatre
2023-10-20 21:31 ` [PATCH v9 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-24 5:41 ` [PATCH v9 0/8] Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-10-24 15:29 ` Luck, Tony
2023-10-31 21:17 ` [PATCH v10 " Tony Luck
2023-10-31 21:17 ` [PATCH v10 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-07 0:31 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-31 21:17 ` [PATCH v10 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-01 19:53 ` Luck, Tony
2023-11-07 0:32 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-07 0:32 ` Reinette Chatre
2023-11-08 19:19 ` Tony Luck
2023-11-08 19:43 ` Reinette Chatre
2023-11-08 20:10 ` Luck, Tony
2023-10-31 21:17 ` [PATCH v10 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-31 21:17 ` [PATCH v10 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-31 21:17 ` [PATCH v10 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-07 0:33 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-11-09 23:09 ` [PATCH v11 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-11-09 23:09 ` [PATCH v11 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-13 19:36 ` Moger, Babu
2023-11-13 20:49 ` Luck, Tony
2023-11-20 22:16 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-11-13 18:08 ` Moger, Babu
2023-11-13 18:52 ` Tony Luck
2023-11-13 19:32 ` Moger, Babu
2023-11-20 22:18 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-20 22:19 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-20 22:19 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-11-20 22:22 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-11-20 22:23 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-20 22:24 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-11-09 23:14 ` Randy Dunlap
2023-11-20 22:25 ` Reinette Chatre
2023-11-13 4:46 ` [PATCH v11 0/8] Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-11-13 17:33 ` Luck, Tony
2023-11-30 0:34 ` [PATCH v12 " Tony Luck
2023-11-30 0:34 ` [PATCH v12 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-30 0:34 ` [PATCH v12 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-11-30 0:34 ` [PATCH v12 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-30 21:51 ` Reinette Chatre
2023-11-30 0:34 ` [PATCH v12 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-30 0:34 ` [PATCH v12 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-11-30 0:34 ` [PATCH v12 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-11-30 0:34 ` [PATCH v12 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-30 18:02 ` Fam Zheng
2023-11-30 20:57 ` Tony Luck
2023-11-30 21:47 ` Reinette Chatre
2023-11-30 22:43 ` Tony Luck
2023-11-30 23:40 ` Reinette Chatre
2023-12-01 0:37 ` Tony Luck
2023-12-01 2:08 ` Reinette Chatre
2023-11-30 0:34 ` [PATCH v12 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-12-04 16:55 ` Moger, Babu
2023-12-04 17:51 ` Luck, Tony
2023-12-04 18:53 ` [PATCH v13 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-12-04 18:53 ` [PATCH v13 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 21:20 ` [PATCH v13 0/8] Add support for Sub-NUMA cluster (SNC) systems Moger, Babu
2023-12-04 21:33 ` Luck, Tony
2023-12-04 23:25 ` Tony Luck
2024-01-26 22:38 ` [PATCH v14 " Tony Luck
2024-01-26 22:38 ` [PATCH v14 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2024-01-26 22:38 ` [PATCH v14 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2024-01-26 22:38 ` [PATCH v14 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2024-01-26 22:38 ` [PATCH v14 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2024-01-26 22:38 ` [PATCH v14 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2024-01-26 22:38 ` [PATCH v14 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2024-01-26 22:38 ` [PATCH v14 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2024-01-26 22:38 ` [PATCH v14 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2024-01-30 1:05 ` [PATCH v14 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC " Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 1/8] x86/resctrl: Split the RDT_RESOURCE_L3 resource Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:44 ` Tony Luck
2024-02-09 19:40 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 2/8] x86/resctrl: Move all monitoring functions to RDT_RESOURCE_L3_MON Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:51 ` Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 3/8] x86/resctrl: Prepare for non-cache-scoped resources Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:57 ` Tony Luck
2024-02-09 19:44 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 4/8] x86/resctrl: Add helper function to look up domain_id from scope Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 19:06 ` Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 5/8] x86/resctrl: Add "NODE" as an option for resource scope Tony Luck
2024-02-09 15:29 ` Moger, Babu
2024-02-09 19:23 ` Tony Luck
2024-02-12 17:16 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2024-02-09 15:29 ` Moger, Babu
2024-02-09 19:35 ` Tony Luck
2024-02-12 17:22 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2024-02-01 18:46 ` [PATCH v15-RFC 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2024-02-08 4:17 ` Drew Fustini
2024-02-08 19:26 ` Luck, Tony
2024-02-09 15:27 ` Moger, Babu
2024-02-09 18:31 ` Tony Luck
2024-02-09 19:38 ` Moger, Babu
2024-02-09 21:26 ` Reinette Chatre
2024-02-09 21:36 ` Luck, Tony
2024-02-09 22:16 ` Reinette Chatre
2024-02-09 23:44 ` Luck, Tony
2024-02-10 0:28 ` Reinette Chatre
2024-02-12 16:52 ` Luck, Tony
2024-02-12 19:44 ` Reinette Chatre
2024-02-12 19:57 ` Luck, Tony
2024-02-12 21:43 ` Reinette Chatre
2024-02-12 22:05 ` Tony Luck
2024-02-13 18:11 ` James Morse
2024-02-13 19:02 ` Luck, Tony
2024-02-12 20:46 ` Moger, Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f1256d3-737e-a447-abbe-f541767b2c8f@intel.com \
--to=reinette.chatre@intel.com \
--cc=babu.moger@amd.com \
--cc=corbet@lwn.net \
--cc=fenghua.yu@intel.com \
--cc=james.morse@arm.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=quic_jiles@quicinc.com \
--cc=rdunlap@infradead.org \
--cc=skhan@linuxfoundation.org \
--cc=tan.shaopeng@fujitsu.com \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.