From: Sylvain Munaut <tnt@246tNt.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Sylvain Munaut <tnt@246tNt.com>,
ML linuxppc-embedded <linuxppc-embedded@ozlabs.org>
Subject: [PATCH 6/6] ppc32: Adds necessary cpu init to use USB on LITE5200 Platform
Date: Sun, 27 Mar 2005 00:47:43 +0100 (CET) [thread overview]
Message-ID: <6.20050327_004704.tnt@patchsend.246tNt.com> (raw)
In-Reply-To: <0.20050327_004704.tnt@patchsend.246tNt.com>
ppc32: Adds necessary cpu init to use USB on LITE5200 Platform
To use external peripheral on MPC5200, some clocking registers
and port-muxing must be done. Since this is platform specific,
it's placed the platform support file. This particular patch
is for USB support on the LITE5200.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
---
diff -Nru a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
--- a/arch/ppc/platforms/lite5200.c 2005-03-26 19:56:38 +01:00
+++ b/arch/ppc/platforms/lite5200.c 2005-03-26 19:56:38 +01:00
@@ -79,21 +79,47 @@
static void __init
lite5200_setup_cpu(void)
{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
struct mpc52xx_xlb __iomem *xlb;
+ u32 port_config;
u32 intr_ctrl;
/* Map zones */
+ cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+ gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
- if (!xlb || !intr) {
- printk("lite5200.c: Error while mapping XLB/INTR during "
+ if (!cdm || !gpio || !xlb || !intr) {
+ printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
"lite5200_setup_cpu\n");
goto unmap_regs;
}
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Get port mux config */
+ port_config = in_be32(&gpio->port_config);
+
+ /* 48Mhz internal, pin is GPIO */
+ port_config &= ~0x00800000;
+
+ /* USB port */
+ port_config &= ~0x00007000; /* Differential mode - USB1 only */
+ port_config |= 0x00001000;
+
+ /* Commit port config */
+ out_be32(&gpio->port_config, port_config);
+
/* Configure the XLB Arbiter */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
@@ -111,6 +137,8 @@
/* Unmap reg zone */
unmap_regs:
+ if (cdm) iounmap(cdm);
+ if (gpio) iounmap(gpio);
if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
@@ -171,7 +199,11 @@
isa_mem_base = 0;
/* Powersave */
- powersave_nap = 1; /* We allow this platform to NAP */
+ /* This is provided as an example on how to do it. But you
+ need to be aware that NAP disable bus snoop and that may
+ be required for some devices to work properly, like USB ... */
+ /* powersave_nap = 1; */
+
/* Setup the ppc_md struct */
ppc_md.setup_arch = lite5200_setup_arch;
next prev parent reply other threads:[~2005-03-26 23:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-26 23:44 [PATCH 0/6] Change MPC52xx to platform bus / ppc_sys model Sylvain Munaut
2005-03-26 23:45 ` [PATCH 1/6] ppc32: Remove unnecessary test in MPC52xx reset code Sylvain Munaut
2005-03-26 23:45 ` [PATCH 2/6] ppc32: Remove the OCP system from the Freescale MPC52xx support Sylvain Munaut
2005-03-26 23:46 ` [PATCH 3/6] ppc32: Change constants style in Freescale MPC52xx related code Sylvain Munaut
2005-03-26 23:46 ` [PATCH 4/6] ppc32: Use platform bus / ppc_sys model for Freescale MPC52xx Sylvain Munaut
2005-03-26 23:47 ` [PATCH 5/6] serial: Update mpc52xx_uart.c to use platform bus Sylvain Munaut
2005-03-26 23:47 ` Sylvain Munaut [this message]
2005-03-27 13:45 ` [PATCH 0/6] Change MPC52xx to platform bus / ppc_sys model Andrey Volkov
2005-03-28 8:58 ` tnt
2005-04-01 20:02 ` [PATCH 1/1] Change MPC52xx-fec " Andrey Volkov
-- strict thread matches above, loose matches on Subject: below --
2005-03-21 23:06 [PATCH 0/6] [RFC] Change MPC52xx to " Sylvain Munaut
2005-03-21 23:09 ` [PATCH 6/6] ppc32: Adds necessary cpu init to use USB on LITE5200 Platform Sylvain Munaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6.20050327_004704.tnt@patchsend.246tNt.com \
--to=tnt@246tnt.com \
--cc=akpm@osdl.org \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.