All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Terry Bowman <terry.bowman@amd.com>, <alison.schofield@intel.com>,
	<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
	<bwidawsk@kernel.org>, <dan.j.williams@intel.com>,
	<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <rrichter@amd.com>, <linux-kernel@vger.kernel.org>,
	<bhelgaas@google.com>
Subject: Re: [PATCH v7 26/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
Date: Fri, 23 Jun 2023 15:18:51 -0700	[thread overview]
Message-ID: <60626151-d838-c335-47e9-246bdbe02dec@intel.com> (raw)
In-Reply-To: <20230622205523.85375-27-terry.bowman@amd.com>



On 6/22/23 13:55, Terry Bowman wrote:
> From: Robert Richter <rrichter@amd.com>
> 
> AER corrected and uncorrectable internal errors (CIE/UIE) are masked
> in their corresponding mask registers per default once in power-up
> state. [1][2] Enable internal errors for RCECs to receive CXL
> downstream port errors of Restricted CXL Hosts (RCHs).
> 
> [1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors
> [2] PCIe Base Spec r6.0, 7.8.4.3 Uncorrectable Error Mask Register,
>      7.8.4.6 Correctable Error Mask Register
> 
> Co-developed-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
>   drivers/pci/pcie/aer.c | 57 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 57 insertions(+)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index c354ca5e8f2b..916fbca95e53 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -948,6 +948,30 @@ static bool find_source_device(struct pci_dev *parent,
>   
>   #ifdef CONFIG_PCIEAER_CXL
>   
> +/**
> + * pci_aer_unmask_internal_errors - unmask internal errors
> + * @dev: pointer to the pcie_dev data structure
> + *
> + * Unmasks internal errors in the Uncorrectable and Correctable Error
> + * Mask registers.
> + *
> + * Note: AER must be enabled and supported by the device which must be
> + * checked in advance, e.g. with pcie_aer_is_native().
> + */
> +static void pci_aer_unmask_internal_errors(struct pci_dev *dev)
> +{
> +	int aer = dev->aer_cap;
> +	u32 mask;
> +
> +	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, &mask);
> +	mask &= ~PCI_ERR_UNC_INTN;
> +	pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, mask);
> +
> +	pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, &mask);
> +	mask &= ~PCI_ERR_COR_INTERNAL;
> +	pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, mask);
> +}
> +
>   static bool is_cxl_mem_dev(struct pci_dev *dev)
>   {
>   	/*
> @@ -1027,7 +1051,39 @@ static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
>   		pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
>   }
>   
> +static int handles_cxl_error_iter(struct pci_dev *dev, void *data)
> +{
> +	bool *handles_cxl = data;
> +
> +	if (!*handles_cxl)
> +		*handles_cxl = is_cxl_mem_dev(dev) && cxl_error_is_native(dev);
> +
> +	/* Non-zero terminates iteration */
> +	return *handles_cxl;
> +}
> +
> +static bool handles_cxl_errors(struct pci_dev *rcec)
> +{
> +	bool handles_cxl = false;
> +
> +	if (pci_pcie_type(rcec) == PCI_EXP_TYPE_RC_EC &&
> +	    pcie_aer_is_native(rcec))
> +		pcie_walk_rcec(rcec, handles_cxl_error_iter, &handles_cxl);
> +
> +	return handles_cxl;
> +}
> +
> +static void cxl_rch_enable_rcec(struct pci_dev *rcec)
> +{
> +	if (!handles_cxl_errors(rcec))
> +		return;
> +
> +	pci_aer_unmask_internal_errors(rcec);
> +	pci_info(rcec, "CXL: Internal errors unmasked");
> +}
> +
>   #else
> +static inline void cxl_rch_enable_rcec(struct pci_dev *dev) { }
>   static inline void cxl_rch_handle_error(struct pci_dev *dev,
>   					struct aer_err_info *info) { }
>   #endif
> @@ -1428,6 +1484,7 @@ static int aer_probe(struct pcie_device *dev)
>   		return status;
>   	}
>   
> +	cxl_rch_enable_rcec(port);
>   	aer_enable_rootport(rpc);
>   	pci_info(port, "enabled with IRQ %d\n", dev->irq);
>   	return 0;

  reply	other threads:[~2023-06-23 22:19 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-22 20:54 [PATCH v7 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 20:54 ` [PATCH v7 01/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-25 19:34   ` Dan Williams
2023-06-22 20:54 ` [PATCH v7 02/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 20:54 ` [PATCH v7 03/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 04/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 20:55 ` [PATCH v7 05/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 20:55 ` [PATCH v7 06/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 20:55 ` [PATCH v7 07/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 20:55 ` [PATCH v7 08/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 20:55 ` [PATCH v7 09/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 10/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 11/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 12/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 13/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 20:55 ` [PATCH v7 14/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-23 13:32   ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 15/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 16/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-25 17:38   ` Dan Williams
2023-06-26 14:16     ` Terry Bowman
2023-06-30 19:51     ` Robert Richter
2023-06-30 19:56     ` Robert Richter
2023-07-03  3:55       ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 17/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 18/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 19/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 20:55 ` [PATCH v7 20/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-23 21:22   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 21/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-23 21:43   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 22/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-23 21:58   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 23/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-23 22:07   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 24/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-23 22:08   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 25/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-23 22:16   ` Dave Jiang
2023-06-25  5:47     ` Dan Williams
2023-06-22 20:55 ` [PATCH v7 26/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-23 22:18   ` Dave Jiang [this message]
2023-06-22 20:55 ` [PATCH v7 27/27] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-23 13:30   ` Jonathan Cameron
2023-06-23 22:19   ` Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=60626151-d838-c335-47e9-246bdbe02dec@intel.com \
    --to=dave.jiang@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bwidawsk@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rrichter@amd.com \
    --cc=terry.bowman@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.