Re: [PATCH net-next v2 08/11] net: stmmac: ingenic: simplify mac_set_mode() methods

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

On 06/11/2025 09:57, Russell King (Oracle) wrote:
> x1000, x1600 and x1830 only accept RMII mode. PHY_INTF_SEL_RMII is only
> selected with PHY_INTERFACE_MODE_RMII, and PHY_INTF_SEL_RMII has been
> validated by the SoC's .valid_phy_intf_sel bitmask. Thus, checking the
> interface mode in these functions becomes unnecessary. Remove these.
> 
> jz4775 is similar, except for a greater set of PHY_INTF_SEL_x valies.
> Also remove the switch statement here.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime

> ---
>  .../ethernet/stmicro/stmmac/dwmac-ingenic.c   | 50 +------------------
>  1 file changed, 2 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> index 539513890db1..7b2576fbb1e1 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> @@ -75,22 +75,6 @@ static int jz4775_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
>  	struct ingenic_mac *mac = plat_dat->bsp_priv;
>  	unsigned int val;
>  
> -	switch (plat_dat->phy_interface) {
> -	case PHY_INTERFACE_MODE_MII:
> -	case PHY_INTERFACE_MODE_GMII:
> -	case PHY_INTERFACE_MODE_RMII:
> -	case PHY_INTERFACE_MODE_RGMII:
> -	case PHY_INTERFACE_MODE_RGMII_ID:
> -	case PHY_INTERFACE_MODE_RGMII_TXID:
> -	case PHY_INTERFACE_MODE_RGMII_RXID:
> -		break;
> -
> -	default:
> -		dev_err(mac->dev, "Unsupported interface %s\n",
> -			phy_modes(plat_dat->phy_interface));
> -		return -EINVAL;
> -	}
> -
>  	val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel) |
>  	      FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT);
>  
> @@ -103,16 +87,6 @@ static int x1000_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
>  {
>  	struct ingenic_mac *mac = plat_dat->bsp_priv;
>  
> -	switch (plat_dat->phy_interface) {
> -	case PHY_INTERFACE_MODE_RMII:
> -		break;
> -
> -	default:
> -		dev_err(mac->dev, "Unsupported interface %s\n",
> -			phy_modes(plat_dat->phy_interface));
> -		return -EINVAL;
> -	}
> -
>  	/* Update MAC PHY control register */
>  	return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, 0);
>  }
> @@ -123,16 +97,6 @@ static int x1600_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
>  	struct ingenic_mac *mac = plat_dat->bsp_priv;
>  	unsigned int val;
>  
> -	switch (plat_dat->phy_interface) {
> -	case PHY_INTERFACE_MODE_RMII:
> -		break;
> -
> -	default:
> -		dev_err(mac->dev, "Unsupported interface %s\n",
> -			phy_modes(plat_dat->phy_interface));
> -		return -EINVAL;
> -	}
> -
>  	val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
>  
>  	/* Update MAC PHY control register */
> @@ -145,18 +109,8 @@ static int x1830_mac_set_mode(struct plat_stmmacenet_data *plat_dat,
>  	struct ingenic_mac *mac = plat_dat->bsp_priv;
>  	unsigned int val;
>  
> -	switch (plat_dat->phy_interface) {
> -	case PHY_INTERFACE_MODE_RMII:
> -		val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII);
> -		break;
> -
> -	default:
> -		dev_err(mac->dev, "Unsupported interface %s\n",
> -			phy_modes(plat_dat->phy_interface));
> -		return -EINVAL;
> -	}
> -
> -	val |= FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
> +	val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII) |
> +	      FIELD_PREP(MACPHYC_PHY_INFT_MASK, phy_intf_sel);
>  
>  	/* Update MAC PHY control register */
>  	return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);