All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002081]: and-atiixp module does not load into kernel
Date: Wed, 24 May 2006 21:02:34 +0200	[thread overview]
Message-ID: <618dfb869130d9f143b320f08e8491b6@bugtrack.alsa-project.org> (raw)


A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2081> 
======================================================================
Reported By:                KaszeL
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Issue ID:                   2081
Category:                   PCI - atiixp
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     assigned
Distribution:               Gentoo
Kernel Version:             2.6.16-ck6-r1
======================================================================
Date Submitted:             04-28-2006 00:07 CEST
Last Modified:              05-24-2006 21:02 CEST
======================================================================
Summary:                    and-atiixp module does not load into kernel
Description: 
On DFI Infinity RS432 kernel module snd-atiixp does not load into kernel.
After succesfoul compilation via gentoo portage/emerge i allways get
errors similar to this:

ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/../alsa-kernel/pci/atiixp.c:458:
atiixp: codec read timeout (reg 0) 
ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/../alsa-kernel/pci/atiixp.c:458:
atiixp: codec read timeout (reg 3c) 
ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/../alsa-kernel/pci/atiixp.c:458:
atiixp: codec read timeout (reg 1c) 
ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/ac97/ac97_codec.c:1910:
AC'97 2 does not respond - RESET 
ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/ac97/ac97_codec.c:1919:
AC'97 2 access is not valid [0xffffffff], removing mixer. 
ALSA
/usr/data/temp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/../alsa-kernel/pci/atiixp.c:1411:
atiixp: no codec available 

Here is my lspci info:
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97
Audio Controller (rev 80) 
        Subsystem: DFI Inc Unknown device 3100 
        Flags: 66MHz, slow devsel, IRQ 18 
        Memory at fe02b000 (32-bit, non-prefetchable) [size=256] 
        Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable

I've tried several kernel and alsa-driver versions. I've also tried to
compile alsa staticly into the kernel but this does not work either.
======================================================================

----------------------------------------------------------------------
 tiwai - 05-03-06 11:46 
----------------------------------------------------------------------
Try acpi=off or pci=noacpi boot option at first.

----------------------------------------------------------------------
 KaszeL - 05-24-06 21:02 
----------------------------------------------------------------------
I've tried to disable ACPI completely, still no change.

Issue History
Date Modified  Username       Field                    Change              
======================================================================
04-28-06 00:07 KaszeL         New Issue                                    
04-28-06 00:07 KaszeL         Distribution              => Gentoo          
04-28-06 00:07 KaszeL         Kernel Version            => 2.6.16-ck6-r1   
04-28-06 00:08 KaszeL         Issue Monitored: KaszeL                      
05-02-06 18:10 tiwai          Note Added: 0009567                          
05-02-06 20:25 KaszeL         Note Added: 0009577                          
05-03-06 11:46 tiwai          Note Added: 0009588                          
05-24-06 21:02 KaszeL         Note Added: 0009958                          
======================================================================




-------------------------------------------------------
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642

             reply	other threads:[~2006-05-24 19:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-24 19:02 bugtrack [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-05-03  9:46 [ALSA - driver 0002081]: and-atiixp module does not load into kernel bugtrack
2006-05-02 18:25 bugtrack
2006-05-02 16:10 bugtrack
2006-04-27 22:07 bugtrack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=618dfb869130d9f143b320f08e8491b6@bugtrack.alsa-project.org \
    --to=bugtrack@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.