Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 28/06/2024 19:32, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>   				bias-pull-down;
>   			};
>   
> +			cam2_default: cam2-default {
> +				rst {
> +					pins = "gpio78"; /*cam3*/

I don't think the /* cam3 */ adds much here TBH.

> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/

You can drop that comment too, actually more saliently, what are you 
changing from 16 to 2 since its being mentioned ?

---
bod