From: Chris Bainbridge <chris.bainbridge@gmail.com>
To: xen-devel <xen-devel@lists.xensource.com>
Subject: can't boot dom0
Date: Wed, 5 Oct 2005 15:55:51 +0100 [thread overview]
Message-ID: <623652d50510050755v1446bf38i@mail.gmail.com> (raw)
Hi,
Just tried latest changeset 7217. It seems to hang after finding the
ata devices. Log:
_____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (portage@me.com) (gcc version 3.4.4 (Gentoo
3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) Wed Oct 5 15:28:35 BST 2005
Latest ChangeSet:
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003fe8cc00 (usable)
(XEN) 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
(XEN) 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
(XEN) 000000003fe90c00 - 0000000040000000 (reserved)
(XEN) 00000000f0000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1022MB (1046704kB)
(XEN) Xen heap: 10MB (10656kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v002 DELL ) @ 0x000feb00
(XEN) ACPI: XSDT (v001 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd244
(XEN) ACPI: FADT (v003 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd33c
(XEN) ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050211) @ 0xfffd2a19
(XEN) ACPI: MADT (v001 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd430
(XEN) ACPI: BOOT (v001 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd4a2
(XEN) ACPI: ASF! (v016 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd4ca
(XEN) ACPI: MCFG (v001 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd531
(XEN) ACPI: HPET (v001 DELL PESC430 0x00000006 ASL 0x00000061) @ 0x000fd56f
(XEN) ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050211) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 2793.112 MHz processor.
(XEN) Using sc EDF Scheduler (sedf)
(XEN) CP 12K uops, L1 D N) CPU: L2 cache: 1024K
(XEN) rocessor ID: 0
(XEN) CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 01800000->02000000 (22528 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c03a5fe8
(XEN) Init. ramdisk: c03a6000->c03a6000
(XEN) Phys-Mach map: c03a6000->c03be000
(XEN) Start info: c03be000->c03bf000
(XEN) Page tables: c03bf000->c03c2000
(XEN) Boot stack: c03c2000->c03c3000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
Linux version 2.6.12.5-xen (root@xen) (gcc version 3.4.4 (Gentoo
3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Wed Oct 5 15:41:52 BST 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000006000000 (usable)
0MB HIGHMEM available.
96MB LOWMEM available.
DMI 2.3 present.
IRQ lockup detection disabled
Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
Built 1 zonelists
Kernel command line: root=/dev/md2
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Xen reported: 2793.112 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Software IO TLB disabled
vmalloc area: c6800000-fb7fe000, maxmem 34000000
Memory: 94336k/98304k available (1833k kernel code, 3832k reserved,
549k data, 116k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
PCI: Using configuration type 1
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
RQ 11 with 0000:00:1f.1h 0000:00:1c.4
PCI: IRQ 0 for device 0000:00:1c.5 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1c.5
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:04:00.0
Grant table initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
PCI: Found IRQ 11 for device 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:1c.4
PCI: Sharing IRQ 11 with 0000:00:1f.1
assign_interrupt_mode Found MSI capability
PCI: Found IRQ 11 for device 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1c.4
PCI: Sharing IRQ 11 with 0000:00:1f.1
assign_interrupt_mode Found MSI capability
PCI: Found IRQ 11 for device 0000:00:1c.4
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:1f.1
assign_interrupt_mode Found MSI capability
PCI: Found IRQ 10 for device 0000:00:1c.5
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:04:00.0
assign_interrupt_mode Found MSI capability
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ sharing disabled
io scheduler noop registered
io scheduler deadline registered
loop: loaded (max 8 devices)
tg3.c:v3.31 (June 8, 2005)
PCI: Found IRQ 10 for device 0000:04:00.0
PCI: Sharing IRQ 10 with 0000:00:1c.5
PCI: Sharing IRQ 10 with 0000:00:1f.3
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)]
(PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:12:3f:71:ed:be
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
WARNING: Failed to register Xen virtual console driver as 'ttyS0'
Evice installed.
xen_net: Initialising Xen netif backend.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:1c.4
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PCI: Found IRQ 5 for device 0000:00:1f.2
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 5
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 5
ata1: dev 0 ATA, max UDMA/133, 312500000 sectors: lba48
ata1: dev 1 ATA, max UDMA/133, 320173056 sectors: lba48
next reply other threads:[~2005-10-05 14:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-05 14:55 Chris Bainbridge [this message]
2005-10-05 15:13 ` can't boot dom0 Chris Bainbridge
2005-10-05 16:00 ` Keir Fraser
-- strict thread matches above, loose matches on Subject: below --
2005-10-05 15:15 AW: " Stephan Böni
2005-10-05 18:32 ` Chris Bainbridge
2005-10-05 21:56 ` Keir Fraser
2005-10-06 7:58 ` Chris Bainbridge
2005-10-06 9:15 ` Keir Fraser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=623652d50510050755v1446bf38i@mail.gmail.com \
--to=chris.bainbridge@gmail.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.