From: yebin <yebin10@huawei.com>
To: <tytso@mit.edu>, <adilger.kernel@dilger.ca>,
<linux-ext4@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <jack@suse.cz>, <lczerner@redhat.com>
Subject: Re: [PATCH -next v2] jbd2: Fix null-ptr-deref when process reserved list in jbd2_journal_commit_transaction
Date: Mon, 4 Apr 2022 18:55:08 +0800 [thread overview]
Message-ID: <624ACE8C.8010008@huawei.com> (raw)
In-Reply-To: <20220317142137.1821590-1-yebin10@huawei.com>
ping...
On 2022/3/17 22:21, Ye Bin wrote:
> we got issue as follows:
> [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
> [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only
> fallocate: fallocate failed: Read-only file system
> [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
> [ 74.793597] ------------[ cut here ]------------
> [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
> [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
> [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
> [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
> [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
> [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
> [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
> [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
> [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
> [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
> [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
> [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 74.811897] Call Trace:
> [ 74.812241] <TASK>
> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180
> [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0
> [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148
> [ 74.817550] kjournald2+0xf8/0x3e0
> [ 74.819056] kthread+0x153/0x1c0
> [ 74.819963] ret_from_fork+0x22/0x30
>
> Above issue may happen as follows:
> write truncate kjournald2
> generic_perform_write
> ext4_write_begin
> ext4_walk_page_buffers
> do_journal_get_write_access ->add BJ_Reserved list
> ext4_journalled_write_end
> ext4_walk_page_buffers
> write_end_fn
> ext4_handle_dirty_metadata
> ***************JBD2 ABORT**************
> jbd2_journal_dirty_metadata
> -> return -EROFS, jh in reserved_list
> jbd2_journal_commit_transaction
> while (commit_transaction->t_reserved_list)
> jh = commit_transaction->t_reserved_list;
> truncate_pagecache_range
> do_invalidatepage
> ext4_journalled_invalidatepage
> jbd2_journal_invalidatepage
> journal_unmap_buffer
> __dispose_buffer
> __jbd2_journal_unfile_buffer
> jbd2_journal_put_journal_head ->put last ref_count
> __journal_remove_journal_head
> bh->b_private = NULL;
> jh->b_bh = NULL;
> jbd2_journal_refile_buffer(journal, jh);
> bh = jh2bh(jh);
> ->bh is NULL, later will trigger null-ptr-deref
> journal_free_journal_head(jh);
>
> As after 96f1e0974575 commit, handle reserved list will not hold "journal->j_state_lock"
> when kjournald2 commit transaction. So journal_unmap_buffer maybe free
> journal_head when handle reserved list. And lead to null-ptr-deref or some
> strange errors.
> As reserved list almost time is empty. Use "journal->j_state_lock" to protect
> handle reserved list can simply solve above issue.
>
> Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
> Signed-off-by: Ye Bin <yebin10@huawei.com>
> ---
> fs/jbd2/commit.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
> index 5b9408e3b370..ac7f067b7bdd 100644
> --- a/fs/jbd2/commit.c
> +++ b/fs/jbd2/commit.c
> @@ -488,7 +488,6 @@ void jbd2_journal_commit_transaction(journal_t *journal)
> jbd2_journal_wait_updates(journal);
>
> commit_transaction->t_state = T_SWITCH;
> - write_unlock(&journal->j_state_lock);
>
> J_ASSERT (atomic_read(&commit_transaction->t_outstanding_credits) <=
> journal->j_max_transaction_buffers);
> @@ -508,6 +507,8 @@ void jbd2_journal_commit_transaction(journal_t *journal)
> * has reserved. This is consistent with the existing behaviour
> * that multiple jbd2_journal_get_write_access() calls to the same
> * buffer are perfectly permissible.
> + * We use journal->j_state_lock here to serialize processing of
> + * t_reserved_list with eviction of buffers from journal_unmap_buffer().
> */
> while (commit_transaction->t_reserved_list) {
> jh = commit_transaction->t_reserved_list;
> @@ -527,6 +528,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
> jbd2_journal_refile_buffer(journal, jh);
> }
>
> + write_unlock(&journal->j_state_lock);
> /*
> * Now try to drop any written-back buffers from the journal's
> * checkpoint lists. We do this *before* commit because it potentially
next prev parent reply other threads:[~2022-04-04 10:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-17 14:21 [PATCH -next v2] jbd2: Fix null-ptr-deref when process reserved list in jbd2_journal_commit_transaction Ye Bin
2022-03-17 15:47 ` Jan Kara
2022-04-04 10:55 ` yebin [this message]
2022-04-27 3:23 ` yebin
2022-04-27 9:41 ` Jan Kara
2022-04-28 14:36 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=624ACE8C.8010008@huawei.com \
--to=yebin10@huawei.com \
--cc=adilger.kernel@dilger.ca \
--cc=jack@suse.cz \
--cc=lczerner@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.