From: Daniel J Blueman <daniel.blueman@gmail.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: [tg3] failing to detect NIC when built statically...
Date: Thu, 22 Sep 2005 09:59:56 +0100 [thread overview]
Message-ID: <6278d222050922015937890366@mail.gmail.com> (raw)
I have a PCI express BCM5751 NIC using the tg3 driver. If I build the
driver statically, it fails to identify the network card - no kernel
log messages or anything. It works as expected when built modular.
Platform is x86_64 running native 64bit code.
# lspci -vvxs 2:0.0
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5751 Gigabit Ethernet PCI Express (rev 01)
Subsystem: Broadcom Corporation NetXtreme BCM5751 Gigabit
Ethernet PCI Express
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 201
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 40100000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: d258788c36d7592c Data: f7f6
Capabilities: [d0] #10 [0001]
00: e4 14 77 16 06 00 10 00 01 00 00 02 08 00 00 00
10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 07 00 00 00 e4 14 77 16
30: 00 00 00 00 48 00 00 00 00 00 00 00 0c 01 00 00
Any ideas? Please CC.
___
Daniel J Blueman
reply other threads:[~2005-09-22 8:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6278d222050922015937890366@mail.gmail.com \
--to=daniel.blueman@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.