Re: [PATCH net-next v4 3/7] net: axienet: Use MDIO bus device in prints

[Sean Anderson <sean.anderson@linux.dev>]

On 8/5/25 17:07, Andrew Lunn wrote:
> On Tue, Aug 05, 2025 at 11:34:52AM -0400, Sean Anderson wrote:
>> For clarity and to remove the dependency on the parent netdev, use the
>> MDIO bus device in print statements.
> 
>> @@ -186,28 +187,31 @@ static int axienet_mdio_enable(struct axienet_local *lp, struct device_node *np)
>>  		/* Legacy fallback: detect CPU clock frequency and use as AXI
>>  		 * bus clock frequency. This only works on certain platforms.
>>  		 */
>> -		np1 = of_find_node_by_name(NULL, "cpu");
>> +		np1 = of_find_node_by_name(NULL, "lpu");
> 
> There is nothing about dev in this change?

Whoops, this was left over from doing s/lp/cp/ and then reverting
it when I decided that there would be too much diffstat. Will fix for v5.

--Sean